successfully added to cart
View Cart

Notifications

Mark all as read
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (40)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (40)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (40)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (40)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (40)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (40)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (40)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (40)
  • M Stainless Steel (40)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (40)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (40)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (40)
  • K Cast Iron (42)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (42)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (42)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (42)
  • N Non-Ferrous Materials (30)
    • N1
      Wrought Aluminum
      (30)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (30)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (10)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (30)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (30)
    • N6
      Carbon, Graphite Composites, CFRP
      (30)
    • N7
      MMC's
      (30)
  • S High-Temp Alloys (42)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (42)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (42)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (42)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (40)
  • H Hardened Materials (27)
    • H1
      Hardened Materials 44-48 HRC
      (27)
    • H2
      Hardened Materials 48-55 HRC
      (27)
    • H3
      Hardened Materials 56-60 HRC
      (27)
    • H4
      Hardened Materials >60 HRC
      (27)
Applications
Applications
  • Facing Facing (28)
  • Multiple Direction Cutting Multiple Direction Cutting (28)
  • Profiling Profiling (25)
  • TRN Boring TRN Boring (27)
  • Turning Turning (42)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (42)
  • Interrupted (27)
  • Lightly Interrupted Cut (42)
  • Smooth Cut (42)
  • Varying Depth of Cut (42)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (3)
  • 62.5 (1)
  • 75.0 (14)
  • 93.0 (10)
  • 95.0 (10)
  • 107.5 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (27)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (23)
  • 2.0 (27)
  • 3.0 (2)
  • 4.0 (40)
  • 6.0 (2)
  • 8.0 (28)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.1 mm (10)
  • 0.102 mm (12)
  • 0.2 mm (10)
  • 0.203 mm (8)
  • 0.34 mm (7)
  • 0.397 mm (19)
  • 0.4 mm (21)
  • 0.406 mm (12)
  • 0.6 mm (2)
  • 0.792 mm (7)
  • 0.794 mm (19)
  • 0.8 mm (32)
  • 1.188 mm (2)
  • 1.191 mm (26)
  • 1.2 mm (32)
  • 1.588 mm (22)
  • 1.6 mm (39)
  • 2.38 mm (2)
  • 2.381 mm (15)
  • 2.4 mm (23)
  • 3.2 mm (13)
  • 4.0 mm (5)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.004 in (17)
  • 0.008 in (10)
  • 0.013 in (7)
  • 0.0156 in (21)
  • 0.016 in (17)
  • 0.031 in (23)
  • 0.0312 in (19)
  • 0.0313 in (32)
  • 0.0468 in (2)
  • 0.0469 in (32)
  • 0.047 in (27)
  • 0.0625 in (39)
  • 0.063 in (22)
  • 0.0928 in (4)
  • 0.0938 in (28)
  • 0.094 in (13)
  • 0.125 in (6)
  • 0.126 in (7)
  • 0.1563 in (2)
  • 0.1575 in (5)
  • 0.312 in (7)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (23)
  • CL4 (18)
  • CM2 (22)
  • CM3 (18)
  • CM4 (2)
  • CPX (25)
  • CW2 (7)
  • CW2015 (25)
  • CW3020 (2)
  • CW5025 (27)
  • GX (11)
  • HK1500 (15)
  • HT2 (7)
  • K060 (7)
  • K090 (30)
  • K1 (17)
  • K10M (30)
  • K10P (25)
  • K10U (17)
  • K15U (17)
  • K20K (30)
  • K21 (11)
  • K25M (19)
  • K25P (28)
  • K313 (30)
  • K35P (21)
  • K420 (27)
  • K45 (8)
  • K68 (28)
  • KB1340 (2)
  • KB1345 (5)
  • KB1610 (10)
  • KB1625 (8)
  • KB1630 (8)
  • KB5610 (10)
  • KB5625 (8)
  • KB5630 (8)
  • KB9610 (17)
  • KB9640 (4)
  • KBH10 (17)
  • KBH10B (15)
  • KBH20 (17)
  • KBH20B (15)
  • KBK35 (2)
  • KBK45 (2)
  • KC210 (23)
  • KC250 (18)
  • KC5010 (40)
  • KC5025 (30)
  • KC5410 (30)
  • KC5510 (30)
  • KC5525 (14)
  • KC720 (17)
  • KC730 (23)
  • KC7310 (30)
  • KC732 (12)
  • KC8050 (40)
  • KC810 (30)
  • KC850 (40)
  • KC9010 (30)
  • KC9025 (40)
  • KC910 (30)
  • KC9105 (25)
  • KC9110 (40)
  • KC9120 (40)
  • KC9125 (40)
  • KC9140 (40)
  • KC9145 (37)
  • KC9210 (7)
  • KC9215 (30)
  • KC9225 (30)
  • KC9240 (40)
  • KC9240NEW (36)
  • KC9245 (30)
  • KC9315 (30)
  • KC9320 (30)
  • KC9325 (30)
  • KC935 (34)
  • KC950 (36)
  • KC990 (36)
  • KCD25 (5)
  • KCK05 (30)
  • KCK05B (30)
  • KCK15 (30)
  • KCK15B (30)
  • KCK20 (30)
  • KCK20B (34)
  • KCM15 (30)
  • KCM15B (25)
  • KCM25 (36)
  • KCM25B (36)
  • KCM35 (30)
  • KCM35B (22)
  • KCP05 (19)
  • KCP05B (23)
  • KCP10 (40)
  • KCP10B (36)
  • KCP25 (40)
  • KCP25B (40)
  • KCP30 (40)
  • KCP30B (37)
  • KCP40 (37)
  • KCP40B (37)
  • KCPK05 (30)
  • KCS10B (30)
  • KCU10 (40)
  • KCU25 (30)
  • KD050 (8)
  • KD081 (8)
  • KD100 (8)
  • KD120 (8)
  • KD1400 (10)
  • KD1405 (8)
  • KD1425 (10)
  • KM1 (5)
  • KT1120 (3)
  • KT125 (15)
  • KT150 (8)
  • KT175 (15)
  • KT315 (17)
  • KT325 (7)
  • KT5020 (3)
  • KTP10 (5)
  • KU10T (17)
  • KU30T (30)
  • KY1310 (11)
  • KY1320 (27)
  • KY1525 (2)
  • KY1540 (13)
  • KY1615 (25)
  • KY2000 (15)
  • KY2100 (7)
  • KY3000 (30)
  • KY3400 (22)
  • KY3500 (32)
  • KY4000 (5)
  • KY4300 (15)
  • KY4400 (27)
  • KYHK15B (27)
  • KYK10 (9)
  • KYK25 (17)
  • KYK35 (32)
  • KYS25 (13)
  • KYS30 (15)
  • NL200 (7)
  • NL250 (30)
  • NL300 (30)
  • NL400 (16)
  • NL920 (18)
  • PS5 (7)
  • SP0819 (22)
  • SP3019 (15)
  • SP4019 (15)
  • SP4036 (3)
  • SP4093 (3)
  • SPADAP (21)
  • SPN4W2 (5)
  • THM (18)
  • TN10P (25)
  • TN10U (17)
  • TN15M (30)
  • TN15U (17)
  • TN2000 (20)
  • TN20K (30)
  • TN20P (30)
  • TN30M (30)
  • TN30P (31)
  • TN4000 (20)
  • TN5015 (22)
  • TN5020 (22)
  • TN5105 (14)
  • TN5120 (27)
  • TN6010 (15)
  • TN6025 (9)
  • TN7005 (14)
  • TN7010 (27)
  • TN7015 (37)
  • TN7025 (37)
  • TN7035 (22)
  • TN7105 (9)
  • TN7110 (17)
  • TN7115 (37)
  • TN7125 (32)
  • TN7135 (22)
  • TN8025 (37)
  • TTI15 (7)
  • TTM09 (5)
  • TTR-X (5)
  • TTS (18)
  • TTX (7)
  • W00342 (5)
  • WBH10C (17)
  • WBH10P (8)
  • WBH10U (10)
  • WBH20P (17)
  • WBH25P (8)
  • WBH25U (12)
  • WBH30P (8)
  • WBK40U (2)
  • WBK45U (12)
  • WDN00U (5)
  • WDN25U (10)
  • WK05CT (30)
  • WK15CT (9)
  • WK20CT (30)
  • WM15CT (30)
  • WM25CT (36)
  • WM35CT (30)
  • WP05CT (2)
  • WP15CT (40)
  • WP25CT (40)
  • WP35CT (40)
  • WS10PT (30)
  • WS25PT (30)
  • WU10HT (25)
  • WU10PT (12)
  • WU25PT (12)
Hand Of Tool
Hand Of Tool
  • L (12)
  • N (3)
  • R (12)
Wiper Insert
Wiper Insert
  • N (42)
  • Y (13)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 4.173 in (26)
  • 5.906 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 106.0 mm (26)
  • 150.0 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (8)
  • E (2)
  • S (17)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (26)
  • NEGATIVE-ZERO (1)
Maximum Bore Depth
Maximum Bore Depth
  • 70.0 mm (27)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 2.756 in (27)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (10)
Front-End
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (14)
  • D-DIAMOND/RHOMBIC 55 (12)
  • S-SQUARE 90 (11)
  • V-DIAMOND/RHOMBIC 35 (3)
  • W-TRIGON 80 (2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (19)
  • B L (17)
  • C A (32)
  • C N (32)
  • D P (17)
  • H T (17)
  • H W (42)
Back-End
Connection Type
Connection Type
  • TAPER SHANK (27)
System Size
System Size
  • KM80TS (27)
other
Cutting Condition Material
Cutting Condition Material
  • H-All (27)
  • K-All (42)
  • K1 (2)
  • M-All (36)
  • N-All (30)
  • P-All (40)
  • S-All (36)
  • S2 (27)
  • S4 (8)
Over All Length [L]
Over All Length [L]
  • 2.7559 in (13)
  • 2.756 in (29)
Over All Length [L] Min to Over All Length [L] Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

KM80TS™ Cutting Units

M-Clamping
(2 Products)
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
3662595 KM80TSMWLNL08 KM80TSMWLNL08 70.0000 2.756 53.0000 2.086 106.0000 4.173 WN..080408/WN.432 2.15 4.74
    List price:
    $501.51 /each.
    Your price::
    Qty
    3662596 KM80TSMWLNR08 KM80TSMWLNR08 70.0000 2.756 53.0000 2.086 106.0000 4.173 WN..080408/WN.432 2.15 4.74
      List price:
      $501.51 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      KM80TS™ Cutting Units

      M-Clamping
      (2 Products)
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
      3662561 KM80TSMVJNL16 KM80TSMVJNL16 70.0000 2.755 53.0000 2.086 VN..160408/VN.332 1.79 3.94
        List price:
        $501.51 /each.
        Your price::
        Qty
        3662562 KM80TSMVJNR16 KM80TSMVJNR16 70.0000 2.755 53.0000 2.086 VN..160408/VN.332 1.79 3.94
          List price:
          $501.51 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          KM80TS™ Cutting Units

          M-Clamping
          (4 Products)
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
          3662580 KM80TSMSKNL25 KM80TSMSKNL25 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..250924/SN..866 2.47 5.45
            List price:
            $501.51 /each.
            Your price::
            Qty
            3662579 KM80TSMSKNL19 KM80TSMSKNL19 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..190512/SN.643 2.37 5.23
              List price:
              $501.51 /each.
              Your price::
              Qty
              3662581 KM80TSMSKNR19 KM80TSMSKNR19 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..190512/SN.643 2.37 5.23
                List price:
                $501.51 /each.
                Your price::
                Qty
                3662582 KM80TSMSKNR25 KM80TSMSKNR25 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..250924/SN..866 2.47 5.45
                  List price:
                  $501.51 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  ORIGINAL PRODUCT

                  KM80TS™ Cutting Units

                  M-Clamping
                  (1 Products)
                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                  3662588 KM80TSMSSNR25 KM80TSMSSNR25 70.0000 2.756 53.0000 2.086 150.0000 5.906 SN..250924/SN.866 2.18 4.81
                    List price:
                    $501.51 /each.
                    Your price::
                    Qty
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    Qty

                    Sold in pkg. of

                    ORIGINAL PRODUCT

                    KM80TS™ Cutting Units

                    M-Clamping
                    (4 Products)
                    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                    3662568 KM80TSMDQNR1504 KM80TSMDQNR1504 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150408/DN..432 2.01 4.44
                      List price:
                      $513.81 /each.
                      Your price::
                      Qty
                      3662567 KM80TSMDQNL1504 KM80TSMDQNL1504 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150408/DN..432 2.01 4.44
                        List price:
                        $513.81 /each.
                        Your price::
                        Qty
                        3662569 KM80TSMDQNL1506 KM80TSMDQNL1506 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150608/DN.442 2.01 4.43
                          List price:
                          $513.81 /each.
                          Your price::
                          Qty
                          3662570 KM80TSMDQNR1506 KM80TSMDQNR1506 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150608/DN.442 2.01 4.43
                            List price:
                            $513.81 /each.
                            Your price::
                            Qty
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is not available
                            Replacement Product This item may be available through a distributor
                            Qty

                            Sold in pkg. of

                            ORIGINAL PRODUCT

                            KM80TS™ Cutting Units

                            M-Clamping
                            (2 Products)
                            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                            View Products
                            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                            3662524 KM80TSMCKNR19 KM80TSMCKNR19 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..190612/CN..643 2.39 5.28
                              List price:
                              $513.81 /each.
                              Your price::
                              Qty
                              3662523 KM80TSMCKNL19 KM80TSMCKNL19 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..190612/CN..643 2.39 5.28
                                List price:
                                $513.81 /each.
                                Your price::
                                Qty
                                List price:
                                Discount: %
                                Your price::
                                Replacement This item is not available
                                Replacement Product This item may be available through a distributor
                                Qty

                                Sold in pkg. of

                                ORIGINAL PRODUCT

                                KM80TS™ Cutting Units

                                M-Clamping
                                (1 Products)
                                • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                View Products
                                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                3662594 KM80TSMVUNR16 KM80TSMVUNR16 70.0000 2.756 53.0000 2.086 106.0000 4.173 VN..160408/VN.332 2.11 4.64
                                  List price:
                                  $501.51 /each.
                                  Your price::
                                  Qty
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty

                                  Sold in pkg. of

                                  ORIGINAL PRODUCT

                                  KM80TS™ Cutting Units

                                  M-Clamping
                                  (2 Products)
                                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                  3662577 KM80TSMSDNN19 KM80TSMSDNN19 70.0000 2.755 0.0000 .0000 SN..190512/SN.643 1.85 4.08
                                    List price:
                                    $501.51 /each.
                                    Your price::
                                    Qty
                                    3662578 KM80TSMSDNN25 KM80TSMSDNN25 70.0000 2.755 0.0000 .0000 SN..250924/SN.866 1.76 3.88
                                      List price:
                                      $501.51 /each.
                                      Your price::
                                      Qty
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty

                                      Sold in pkg. of

                                      ORIGINAL PRODUCT

                                      KM80TS™ Cutting Units

                                      M-Clamping
                                      (4 Products)
                                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                      3662583 KM80TSMSRNL19 KM80TSMSRNL19 70.0000 2.755 48.0000 1.889 SN..190512/SN.643 2.12 4.67
                                        List price:
                                        $501.51 /each.
                                        Your price::
                                        Qty
                                        3662584 KM80TSMSRNL25 KM80TSMSRNL25 70.0000 2.755 48.0000 1.889 SN..250924/SN.866 2.19 4.82
                                          List price:
                                          $501.51 /each.
                                          Your price::
                                          Qty
                                          3662585 KM80TSMSRNR19 KM80TSMSRNR19 70.0000 2.755 48.0000 1.889 SN..190512/SN.643 2.12 4.67
                                            List price:
                                            $501.51 /each.
                                            Your price::
                                            Qty
                                            3662586 KM80TSMSRNR25 KM80TSMSRNR25 70.0000 2.755 48.0000 1.889 SN..250924/SN.866 2.19 4.82
                                              List price:
                                              $501.51 /each.
                                              Your price::
                                              Qty
                                              List price:
                                              Discount: %
                                              Your price::
                                              Replacement This item is not available
                                              Replacement Product This item may be available through a distributor
                                              Qty

                                              Sold in pkg. of

                                              ORIGINAL PRODUCT

                                              KM80TS™ Cutting Units

                                              M-Clamping
                                              (3 Products)
                                              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                              View Products
                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                              3662572 KM80TSMDUNR1504 KM80TSMDUNR1504 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150408/DN..432 2.28 5.02
                                                List price:
                                                $513.81 /each.
                                                Your price::
                                                Qty
                                                3662573 KM80TSMDUNL1506 KM80TSMDUNL1506 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150608/DN.442 2.27 5.01
                                                  List price:
                                                  $513.81 /each.
                                                  Your price::
                                                  Qty
                                                  3662574 KM80TSMDUNR1506 KM80TSMDUNR1506 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150608/DN.442 2.27 5.01
                                                    List price:
                                                    $513.81 /each.
                                                    Your price::
                                                    Qty
                                                    List price:
                                                    Discount: %
                                                    Your price::
                                                    Replacement This item is not available
                                                    Replacement Product This item may be available through a distributor
                                                    Qty

                                                    Sold in pkg. of

                                                    ORIGINAL PRODUCT

                                                    KM80TS™ Cutting Units

                                                    M-Clamping
                                                    (1 Products)
                                                    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                                    View Products
                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                    3662566 KM80TSMDPNN1506 KM80TSMDPNN1506 70.0000 2.755 0.0000 .0000 DN..150608/DN.442 1.72 3.80
                                                      List price:
                                                      $513.81 /each.
                                                      Your price::
                                                      Qty
                                                      List price:
                                                      Discount: %
                                                      Your price::
                                                      Replacement This item is not available
                                                      Replacement Product This item may be available through a distributor
                                                      Qty

                                                      Sold in pkg. of

                                                      ORIGINAL PRODUCT

                                                      KM80TS™ Cutting Units

                                                      M-Clamping
                                                      (4 Products)
                                                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                                      View Products
                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                      3662541 KM80TSMDJNL1504 KM80TSMDJNL1504 70.0000 2.755 53.0000 2.086 DN..150408/DN..432 1.85 4.07
                                                        List price:
                                                        $513.81 /each.
                                                        Your price::
                                                        Qty
                                                        3662542 KM80TSMDJNR1504 KM80TSMDJNR1504 70.0000 2.756 53.0000 2.087 DN..150408/DN..432 1.86 4.10
                                                          List price:
                                                          $513.81 /each.
                                                          Your price::
                                                          Qty
                                                          3662563 KM80TSMDJNL1506 KM80TSMDJNL1506 70.0000 2.755 53.0000 2.086 DN..150608/DN.442 1.84 4.06
                                                            List price:
                                                            $513.81 /each.
                                                            Your price::
                                                            Qty
                                                            3662564 KM80TSMDJNR1506 KM80TSMDJNR1506 70.0000 2.756 53.0000 2.087 DN..150608/DN.442 1.84 4.06
                                                              List price:
                                                              $513.81 /each.
                                                              Your price::
                                                              Qty
                                                              List price:
                                                              Discount: %
                                                              Your price::
                                                              Replacement This item is not available
                                                              Replacement Product This item may be available through a distributor
                                                              Qty

                                                              Sold in pkg. of

                                                              ORIGINAL PRODUCT

                                                              KM80TS™ Cutting Units

                                                              M-Clamping
                                                              (4 Products)
                                                              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                                              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                                              View Products
                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                              3662534 KM80TSMCRNL19 KM80TSMCRNL19 70.0000 2.756 48.0000 1.889 106.0000 4.173 CN..190612/CN..643 2.26 4.99
                                                                List price:
                                                                $513.81 /each.
                                                                Your price::
                                                                Qty
                                                                3662535 KM80TSMCRNL25 KM80TSMCRNL25 70.0000 2.756 48.0000 1.889 106.0000 4.173 CN..250924/CN..866 2.25 4.97
                                                                  List price:
                                                                  $513.81 /each.
                                                                  Your price::
                                                                  Qty
                                                                  3662537 KM80TSMCRNR19 KM80TSMCRNR19 70.0000 2.755 48.0000 1.889