successfully added to cart
View Cart

Notifications

Mark all as read

KM4X63™ • HPC • High Pressure Coolant Cutting Units

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (12)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (12)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (12)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (12)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (12)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (12)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (12)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (12)
  • M Stainless Steel (12)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (12)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (12)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (12)
  • K Cast Iron (12)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (12)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (12)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (12)
  • N Non-Ferrous Materials (12)
    • N1
      Wrought Aluminum
      (12)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (12)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (7)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (12)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (12)
    • N6
      Carbon, Graphite Composites, CFRP
      (12)
    • N7
      MMC's
      (12)
  • S High-Temp Alloys (12)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (12)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (12)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (12)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (12)
  • H Hardened Materials (12)
    • H1
      Hardened Materials 44-48 HRC
      (12)
    • H2
      Hardened Materials 48-55 HRC
      (12)
    • H3
      Hardened Materials 56-60 HRC
      (12)
    • H4
      Hardened Materials >60 HRC
      (11)
Applications
Applications
  • Facing Facing (12)
  • ID Facing ID Facing (8)
  • Multiple Direction Cutting Multiple Direction Cutting (12)
  • TRN Boring TRN Boring (12)
  • Turning Turning (12)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (12)
  • Interrupted (8)
  • Lightly Interrupted Cut (12)
  • Smooth Cut (12)
  • Varying Depth of Cut (12)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 0.0 (2)
  • 48.0 (1)
  • 49.683 (2)
  • 50.0 (2)
  • 72.5 (1)
  • 95.0 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (9)
  • 2.0 (11)
  • 4.0 (9)
  • 8.0 (6)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Corner configuration
Corner Radius
Corner Radius
  • 0.038 mm (2)
  • 0.1 mm (7)
  • 0.102 mm (6)
  • 0.2 mm (7)
  • 0.203 mm (4)
  • 0.34 mm (2)
  • 0.397 mm (8)
  • 0.4 mm (11)
  • 0.406 mm (2)
  • 0.792 mm (6)
  • 0.794 mm (9)
  • 0.8 mm (11)
  • 1.188 mm (4)
  • 1.19 mm (4)
  • 1.191 mm (8)
  • 1.2 mm (11)
  • 1.587 mm (4)
  • 1.588 mm (6)
  • 1.6 mm (8)
  • 2.38 mm (2)
  • 2.4 mm (2)
  • 3.2 mm (2)
  • 6.0 mm (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0015 in (2)
  • 0.004 in (9)
  • 0.008 in (7)
  • 0.0083 in (4)
  • 0.013 in (2)
  • 0.0156 in (11)
  • 0.0158 in (1)
  • 0.016 in (7)
  • 0.031 in (6)
  • 0.0312 in (9)
  • 0.0313 in (11)
  • 0.0315 in (7)
  • 0.0468 in (4)
  • 0.0469 in (11)
  • 0.047 in (9)
  • 0.0472 in (4)
  • 0.0625 in (8)
  • 0.063 in (8)
  • 0.0938 in (2)
  • 0.094 in (2)
  • 0.126 in (2)
  • 0.1563 in (4)
  • 0.2362 in (1)
  • 0.312 in (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (9)
  • 241 (4)
  • AC5 (1)
  • CL4 (6)
  • CM2 (8)
  • CM3 (7)
  • CM4 (6)
  • CM5 (1)
  • CPX (9)
  • CW2 (6)
  • CW2015 (8)
  • CW5025 (8)
  • GX (4)
  • HCK10 (1)
  • HK1500 (8)
  • HK35 (1)
  • HT2 (9)
  • HTX (7)
  • HWK15 (1)
  • K060 (4)
  • K090 (8)
  • K1 (4)
  • K10M (11)
  • K10P (9)
  • K10U (8)
  • K15U (8)
  • K20K (9)
  • K21 (4)
  • K25M (10)
  • K25P (8)
  • K313 (12)
  • K35P (4)
  • K420 (6)
  • K45 (4)
  • K68 (12)
  • KB1340 (4)
  • KB1345 (5)
  • KB1610 (6)
  • KB1625 (6)
  • KB1630 (5)
  • KB5610 (6)
  • KB5625 (6)
  • KB5630 (6)
  • KB9610 (8)
  • KB9640 (4)
  • KBH10 (8)
  • KBH10B (6)
  • KBH20 (9)
  • KBH20B (6)
  • KBK35 (4)
  • KC210 (6)
  • KC250 (6)
  • KC5010 (12)
  • KC5020P (2)
  • KC5025 (12)
  • KC5410 (12)
  • KC5510 (8)
  • KC5525 (6)
  • KC710 (4)
  • KC720 (9)
  • KC722 (4)
  • KC730 (10)
  • KC7310 (8)
  • KC732 (10)
  • KC8050 (12)
  • KC810 (11)
  • KC850 (12)
  • KC9010 (8)
  • KC9025 (11)
  • KC910 (12)
  • KC9105 (11)
  • KC9110 (12)
  • KC9120 (8)
  • KC9125 (12)
  • KC9140 (8)
  • KC9145 (8)
  • KC9210 (2)
  • KC9215 (8)
  • KC9225 (11)
  • KC9240 (12)
  • KC9240NEW (12)
  • KC9245 (8)
  • KC9315 (12)
  • KC9320 (12)
  • KC9325 (9)
  • KC935 (11)
  • KC950 (10)
  • KC990 (8)
  • KCD25 (3)
  • KCK05 (11)
  • KCK05B (10)
  • KCK15 (12)
  • KCK15B (12)
  • KCK20 (12)
  • KCK20B (12)
  • KCM15 (11)
  • KCM15B (11)
  • KCM25 (12)
  • KCM25B (12)
  • KCM35 (11)
  • KCM35B (8)
  • KCP05 (11)
  • KCP05B (8)
  • KCP10 (12)
  • KCP10B (12)
  • KCP15 (2)
  • KCP25 (12)
  • KCP25B (12)
  • KCP30 (12)
  • KCP30B (10)
  • KCP40 (8)
  • KCP40B (10)
  • KCPK05 (9)
  • KCS10 (8)
  • KCS10B (12)
  • KCU10 (12)
  • KCU25 (12)
  • KD050 (6)
  • KD081 (6)
  • KD100 (6)
  • KD120 (4)
  • KD1400 (6)
  • KD1405 (6)
  • KD1425 (6)
  • KM1 (4)
  • KMF (4)
  • KT1120 (2)
  • KT125 (6)
  • KT150 (4)
  • KT175 (8)
  • KT315 (9)
  • KT325 (9)
  • KTP10 (2)
  • KU10 (2)
  • KU10T (9)
  • KU30T (11)
  • KY1310 (6)
  • KY1320 (8)
  • KY1540 (4)
  • KY1615 (9)
  • KY2000 (6)
  • KY2100 (4)
  • KY3000 (8)
  • KY3400 (6)
  • KY3500 (8)
  • KY4000 (6)
  • KY4300 (6)
  • KY4400 (8)
  • KYHK15B (8)
  • KYK10 (4)
  • KYK25 (6)
  • KYK35 (8)
  • KYS25 (4)
  • KYS30 (4)
  • MC2 (1)
  • NL200 (6)
  • NL250 (8)
  • NL300 (9)
  • NL400 (6)
  • NL920 (7)
  • P25 (4)
  • PB100 (4)
  • PB170 (5)
  • PB250 (5)
  • PB300 (4)
  • PD100 (1)
  • PD50 (1)
  • PS5 (6)
  • SP0819 (8)
  • SP0PW3 (1)
  • SP3019 (6)
  • SP4019 (7)
  • THM (10)
  • THM-X (4)
  • THMF-X (4)
  • TN10P (11)
  • TN10U (9)
  • TN15M (11)
  • TN15U (8)
  • TN2000 (9)
  • TN20K (11)
  • TN20P (11)
  • TN30M (11)
  • TN30P (8)
  • TN4000 (8)
  • TN5015 (10)
  • TN5020 (12)
  • TN5105 (7)
  • TN5120 (12)
  • TN6010 (7)
  • TN6025 (6)
  • TN7005 (8)
  • TN7010 (12)
  • TN7015 (12)
  • TN7025 (12)
  • TN7035 (12)
  • TN7105 (10)
  • TN7110 (12)
  • TN7115 (12)
  • TN7125 (12)
  • TN7135 (12)
  • TN8025 (9)
  • TTI15 (9)
  • TTM09 (1)
  • TTR (5)
  • TTS (6)
  • TTX (8)
  • W00342 (1)
  • WBH10C (8)
  • WBH10P (6)
  • WBH10U (6)
  • WBH20P (7)
  • WBH25P (6)
  • WBH25U (8)
  • WBH30P (6)
  • WBK40U (4)
  • WBK45U (7)
  • WDN00U (4)
  • WDN25U (6)
  • WK05CT (9)
  • WK15CT (9)
  • WK20CT (12)
  • WM15CT (11)
  • WM25CT (11)
  • WM35CT (8)
  • WP05CT (4)
  • WP15CT (12)
  • WP25CT (12)
  • WP35CT (12)
  • WS10PT (9)
  • WS25PT (8)
  • WU05PT (1)
  • WU10HT (12)
  • WU10PT (8)
  • WU25PT (8)
  • X00511 (4)
Wiper Insert
Wiper Insert
  • N (12)
  • Y (2)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 3.15 in (4)
  • 3.9 in (1)
  • 3.937 in (7)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 80.0 mm (4)
  • 100.0 mm (8)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Bore Depth
Maximum Bore Depth
  • 70.0 mm (4)
  • 115.0 mm (8)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 2.756 in (4)
  • 4.528 in (8)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Clamp Style
Clamp Style
  • D (1)
  • P (7)
  • S (4)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (7)
  • D-DIAMOND/RHOMBIC 55 (2)
  • R-ROUND (1)
  • V-DIAMOND/RHOMBIC 35 (2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (9)
  • B L (9)
  • C A (9)
  • C N (8)
  • D P (9)
  • H T (10)
  • H W (12)
other
Cutting Condition Material
Cutting Condition Material
  • H-All (12)
  • K-All (12)
  • K1 (4)
  • M-All (12)
  • N-All (12)
  • P-All (12)
  • S-All (12)
  • S2 (8)
  • S4 (6)
Insert Hand
Insert Hand
  • L (2)
  • N (12)
  • R (3)
Over All Length [L]
Over All Length [L]
  • 70.0 mm (4)
  • 115.0 mm (8)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 2.756 in (4)
  • 4.528 in (8)
Over All Length [L] Min to Over All Length [L] Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

KM4X63 Cutting Units HPC

P-Clamping
(4 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
5720354 KM4X63PCLNL12HPC KM4X63PCLNL12HPC 70.0000 2.756 43.0000 1.693 80.0000 3.150 CN..120408/CN..432 1.51 3.33
    List price:
    $626.49 /each.
    Your price::
    Qty
    5720356 KM4X63PCLNL16HPC KM4X63PCLNL16HPC 70.0000 2.756 43.0000 1.693 80.0000 3.150 CN..160612/CN..543 1.49 3.28
      List price:
      $626.49 /each.
      Your price::
      Qty
      5720353 KM4X63PCLNR12HPC KM4X63PCLNR12HPC 70.0000 2.756 43.0000 1.693 80.0000 3.150 CN..120408/CN..432 1.51 3.33
        List price:
        $626.49 /each.
        Your price::
        Qty
        5720355 KM4X63PCLNR16HPC KM4X63PCLNR16HPC 70.0000 2.756 43.0000 1.693 80.0000 3.150 CN..160612/CN..543 1.49 3.28
          List price:
          $626.49 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          • Shank: KM4X™Shank: KM4X™
          • Multi Coolant TurningMulti Coolant Turning
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
          6275083 KM4X63PDNNN15115HPC KM4X63PDNNN15115HPC 115.0000 4.528 0.0000 .0000 DN..150608/DN..442 1.95 4.30
            List price:
            $449.43 /each.
            Your price::
            Qty
            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor
            Qty

            Sold in pkg. of

            ORIGINAL PRODUCT

            • Shank: KM4X™Shank: KM4X™
            • Multi Coolant TurningMulti Coolant Turning
            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
            View Products
            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
            6275087 KM4X63SVMBL16115HPC KM4X63SVMBL16115HPC 115.0000 4.528 0.0000 .0000 VB..160408/VB..332 1.82 4.01
              List price:
              $449.43 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              • Shank: KM4X™Shank: KM4X™
              • Multi Coolant TurningMulti Coolant Turning
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
              6275086 KM4X63SRDCN12115HPC KM4X63SRDCN12115HPC 115.0000 4.528 0.0000 .0000 RC..1204M0 1.93 4.25
                List price:
                $449.43 /each.
                Your price::
                Qty
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor
                Qty

                Sold in pkg. of

                ORIGINAL PRODUCT

                • Shank: KM4X™Shank: KM4X™
                • Multi Coolant TurningMulti Coolant Turning
                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                6275084 KM4X63DCMNN12115HPC KM4X63DCMNN12115HPC 115.0000 4.528 0.0000 .0000 CN..120408/CN..432 2.10 4.62
                  List price:
                  $449.43 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  ORIGINAL PRODUCT

                  • Shank: KM4X™Shank: KM4X™
                  • Multi Coolant TurningMulti Coolant Turning
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                  6275081 KM4X63PCMNN12115HPC KM4X63PCMNN12115HPC 115.0000 4.528 0.0000 .0000 CN..120408/CN..432 2.09 4.60
                    List price:
                    $449.43 /each.
                    Your price::
                    Qty
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    Qty

                    Sold in pkg. of

                    ORIGINAL PRODUCT

                    • Shank: KM4X™Shank: KM4X™
                    • Multi Coolant TurningMulti Coolant Turning
                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                    6275088 KM4X63SVVBN16115HPC KM4X63SVVBN16115HPC 115.0000 4.528 0.0000 .0000 VB..160408/VB..332 1.63 3.60
                      List price:
                      $449.43 /each.
                      Your price::
                      Qty
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty

                      Sold in pkg. of

                      ORIGINAL PRODUCT

                      • Shank: KM4X™Shank: KM4X™
                      • Multi Coolant TurningMulti Coolant Turning
                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                      6275085 KM4X63SCMCN12115HPC KM4X63SCMCN12115HPC 115.0000 4.528 0.0000 .0000 CC..120408/CC..432 1.89 4.16
                        List price:
                        $449.43 /each.
                        Your price::
                        Qty
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor
                        Qty

                        Sold in pkg. of

                        ORIGINAL PRODUCT

                        • Shank: KM4X™Shank: KM4X™
                        • Multi Coolant TurningMulti Coolant Turning
                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                        View Products
                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                        6275082 KM4X63PDMNL15115HPC KM4X63PDMNL15115HPC 115.0000 4.528 0.0000 .0000 DN..150608/DN..442 1.82 4.02
                          List price:
                          $449.43 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty

                          Sold in pkg. of

                          product-image
                          Please adjust the following properties from

                          ISO Catalog Number

                          ANSI Catalog Number

                          to find similar products.
                          You are about to create a duplicate . Do you want to proceed?
                          You are about to delete Do you want to proceed?
                          What would you like to rename your to?
                          Please enter a valid name
                          Please enter a name for the duplicate
                          Please enter a valid name
                          You are about to add to your My Solutions page. Do you want to proceed?
                          Please enter a valid name
                          Send a copy of

                          Please enter a valid Email
                          Please enter a valid name

                          We have found the following CAD Drawings

                          Select the files you are looking for and download them all at once

                          You should be logged to see your dashboard information
                          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                          item(s) successfully added to the cart
                          View Cart