successfully added to cart
View Cart

Notifications

Mark all as read
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (8)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (8)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (8)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (8)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (8)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (8)
  • M Stainless Steel (8)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (8)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (8)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (8)
  • K Cast Iron (8)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (8)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (8)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (8)
  • N Non-Ferrous Materials (8)
    • N1
      Wrought Aluminum
      (8)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (8)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (8)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (8)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (8)
    • N6
      Carbon, Graphite Composites, CFRP
      (8)
    • N7
      MMC's
      (8)
  • S High-Temp Alloys (8)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (8)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (8)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (8)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (8)
  • H Hardened Materials (8)
    • H1
      Hardened Materials 44-48 HRC
      (8)
    • H2
      Hardened Materials 48-55 HRC
      (8)
    • H3
      Hardened Materials 56-60 HRC
      (8)
    • H4
      Hardened Materials >60 HRC
      (8)
Applications
Applications
  • Grooving Grooving (8)
  • ID Grooving ID Grooving (5)
Type of Thread
Type of Thread
  • 60 (8)
  • ACME (8)
  • API (8)
  • API RD (6)
  • BSW (6)
  • BUTTRESS (8)
  • M (6)
  • NPT (6)
  • STUB ACME (6)
  • UN (8)
  • UNJ (6)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (8)
  • Lightly Interrupted Cut (8)
  • Smooth Cut (8)
  • Varying Depth of Cut (8)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 90.0 (6)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • PSC (3)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (8)
  • 2.0 (8)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.051 mm (3)
  • 0.057 mm (3)
  • 0.066 mm (6)
  • 0.076 mm (8)
  • 0.08 mm (6)
  • 0.094 mm (6)
  • 0.097 mm (3)
  • 0.1 mm (6)
  • 0.102 mm (6)
  • 0.116 mm (3)
  • 0.117 mm (3)
  • 0.127 mm (6)
  • 0.131 mm (6)
  • 0.132 mm (6)
  • 0.133 mm (6)
  • 0.15 mm (6)
  • 0.155 mm (6)
  • 0.157 mm (6)
  • 0.16 mm (2)
  • 0.165 mm (8)
  • 0.173 mm (6)
  • 0.178 mm (6)
  • 0.19 mm (8)
  • 0.191 mm (8)
  • 0.198 mm (6)
  • 0.2 mm (6)
  • 0.202 mm (6)
  • 0.224 mm (6)
  • 0.235 mm (6)
  • 0.244 mm (3)
  • 0.25 mm (6)
  • 0.251 mm (6)
  • 0.254 mm (8)
  • 0.269 mm (6)
  • 0.282 mm (6)
  • 0.284 mm (6)
  • 0.3 mm (6)
  • 0.315 mm (6)
  • 0.318 mm (8)
  • 0.33 mm (6)
  • 0.34 mm (6)
  • 0.343 mm (2)
  • 0.356 mm (6)
  • 0.404 mm (6)
  • 0.406 mm (6)
  • 0.43 mm (6)
  • 0.445 mm (8)
  • 0.472 mm (3)
  • 0.49 mm (6)
  • 0.508 mm (6)
  • 0.57 mm (3)
  • 0.572 mm (8)
  • 0.575 mm (5)
  • 0.787 mm (6)
  • 0.902 mm (8)
  • 1.0 mm (6)
  • 1.194 mm (6)
  • 1.195 mm (3)
  • 1.25 mm (6)
  • 1.5 mm (6)
  • 1.585 mm (6)
  • 1.588 mm (8)
  • 1.75 mm (6)
  • 1.98 mm (3)
  • 1.981 mm (6)
  • 2.0 mm (8)
  • 2.25 mm (8)
  • 2.388 mm (8)
  • 2.39 mm (2)
  • 2.5 mm (2)
  • 3.175 mm (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.002 in (3)
  • 0.0023 in (3)
  • 0.0026 in (6)
  • 0.003 in (8)
  • 0.0031 in (6)
  • 0.0037 in (6)
  • 0.0038 in (3)
  • 0.004 in (6)
  • 0.0046 in (6)
  • 0.005 in (6)
  • 0.0052 in (6)
  • 0.0053 in (6)
  • 0.0059 in (6)
  • 0.006 in (6)
  • 0.0062 in (6)
  • 0.0065 in (8)
  • 0.0068 in (6)
  • 0.007 in (6)
  • 0.0075 in (8)
  • 0.0078 in (6)
  • 0.0079 in (3)
  • 0.008 in (6)
  • 0.0088 in (6)
  • 0.0093 in (6)
  • 0.0096 in (3)
  • 0.0099 in (6)
  • 0.01 in (8)
  • 0.0106 in (6)
  • 0.0111 in (6)
  • 0.0112 in (6)
  • 0.0118 in (6)
  • 0.0124 in (6)
  • 0.0125 in (8)
  • 0.013 in (6)
  • 0.0135 in (8)
  • 0.014 in (6)
  • 0.0159 in (6)
  • 0.016 in (6)
  • 0.017 in (6)
  • 0.0175 in (8)
  • 0.0186 in (3)
  • 0.0193 in (6)
  • 0.02 in (6)
  • 0.0225 in (8)
  • 0.031 in (6)
  • 0.0355 in (8)
  • 0.0394 in (6)
  • 0.047 in (6)
  • 0.0492 in (6)
  • 0.0591 in (6)
  • 0.0625 in (8)
  • 0.0689 in (6)
  • 0.078 in (6)
  • 0.0787 in (8)
  • 0.0886 in (8)
  • 0.094 in (8)
  • 0.0984 in (2)
  • 0.106 in (3)
  • 0.125 in (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (6)
  • K313 (8)
  • K420 (8)
  • K4H (6)
  • K68 (8)
  • KB1345 (8)
  • KB1630 (8)
  • KB5625 (6)
  • KC250 (6)
  • KC5010 (8)
  • KC5025 (8)
  • KC5410 (8)
  • KC710 (8)
  • KC720 (8)
  • KC722 (8)
  • KC730 (8)
  • KC732 (6)
  • KC810 (8)
  • KC850 (8)
  • KC910 (6)
  • KC9110 (8)
  • KC9120 (6)
  • KC9320 (8)
  • KC935 (8)
  • KC950 (8)
  • KCK20 (8)
  • KCK20B (8)
  • KCP10B (8)
  • KCP25B (8)
  • KCU10 (8)
  • KCU25 (8)
  • KD050 (3)
  • KD081 (6)
  • KD100 (6)
  • KD120 (8)
  • KD1425 (6)
  • KT175 (6)
  • KT315 (8)
  • KU10T (8)
  • KU25T (8)
  • KU30T (8)
  • KY3000 (8)
  • THM (6)
  • TN10P (6)
  • TN6010 (8)
  • TN6025 (8)
  • TN7110 (8)
  • WU10HT (3)
  • WU10PT (2)
  • WU25PT (3)
Hand Of Tool
Hand Of Tool
  • L (1)
  • R (2)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (3)
  • 1.626 in (2)
  • 1.874 in (2)
  • 2.252 in (1)
  • 2.4409 in (3)
  • 2.5197 in (2)
  • 3.5 in (2)
  • 5.5 in (2)
  • 6.874 in (2)
  • 8.252 in (1)
  • 8.752 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (3)
  • 41.3 mm (2)
  • 47.6 mm (2)
  • 57.2 mm (1)
  • 62.0 mm (3)
  • 64.0 mm (2)
  • 88.9 mm (2)
  • 139.7 mm (2)
  • 174.6 mm (2)
  • 209.6 mm (1)
  • 222.3 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (3)
Maximum Bore Depth
Maximum Bore Depth
  • 52.0 mm (5)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 2.0472 in (5)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Cutting Width
Cutting Width
  • 1.0 mm (6)
  • 1.19 mm (3)
  • 1.194 mm (6)
  • 1.2 mm (6)
  • 1.5 mm (6)
  • 1.57 mm (6)
  • 1.575 mm (6)
  • 1.75 mm (6)
  • 1.829 mm (6)
  • 1.981 mm (6)
  • 2.0 mm (6)
  • 2.2 mm (6)
  • 2.235 mm (6)
  • 2.24 mm (3)
  • 2.25 mm (3)
  • 2.388 mm (6)
  • 2.39 mm (3)
  • 2.464 mm (6)
  • 2.5 mm (6)
  • 2.667 mm (6)
  • 2.743 mm (6)
  • 2.75 mm (6)
  • 2.794 mm (6)
  • 2.997 mm (6)
  • 3.0 mm (8)
  • 3.099 mm (6)
  • 3.17 mm (6)
  • 3.175 mm (8)
  • 3.2 mm (8)
  • 3.25 mm (6)
  • 3.251 mm (6)
  • 3.32 mm (3)
  • 3.329 mm (3)
  • 3.5 mm (8)
  • 3.607 mm (6)
  • 3.96 mm (6)
  • 3.962 mm (6)
  • 3.974 mm (3)
  • 3.988 mm (6)
  • 4.0 mm (8)
  • 4.24 mm (3)
  • 4.242 mm (8)
  • 4.25 mm (3)
  • 4.3 mm (6)
  • 4.5 mm (8)
  • 4.521 mm (6)
  • 4.699 mm (8)
  • 4.775 mm (8)
  • 4.78 mm (2)
  • 4.785 mm (2)
  • 4.8 mm (6)
  • 4.801 mm (8)
  • 4.81 mm (6)
  • 4.88 mm (3)
  • 4.95 mm (6)
  • 5.0 mm (2)
  • 5.004 mm (2)
  • 5.131 mm (2)
  • 5.41 mm (2)
  • 5.5 mm (2)
  • 5.563 mm (2)
  • 6.0 mm (2)
  • 6.35 mm (2)
  • 6.48 mm (2)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.0394 in (6)
  • 0.047 in (6)
  • 0.0472 in (6)
  • 0.0591 in (6)
  • 0.062 in (6)
  • 0.0689 in (6)
  • 0.072 in (6)
  • 0.078 in (6)
  • 0.0787 in (6)
  • 0.079 in (3)
  • 0.0866 in (6)
  • 0.088 in (6)
  • 0.0886 in (3)
  • 0.094 in (6)
  • 0.097 in (6)
  • 0.0984 in (6)
  • 0.105 in (6)
  • 0.108 in (6)
  • 0.1083 in (6)
  • 0.11 in (6)
  • 0.118 in (6)
  • 0.1181 in (8)
  • 0.122 in (6)
  • 0.125 in (8)
  • 0.126 in (8)
  • 0.128 in (6)
  • 0.131 in (3)
  • 0.1378 in (8)
  • 0.142 in (6)
  • 0.156 in (6)
  • 0.157 in (6)
  • 0.1574 in (8)
  • 0.1575 in (8)
  • 0.167 in (8)
  • 0.1673 in (3)
  • 0.169 in (6)
  • 0.1771 in (8)
  • 0.1772 in (8)
  • 0.178 in (6)
  • 0.185 in (8)
  • 0.188 in (8)
  • 0.189 in (8)
  • 0.192 in (3)
  • 0.195 in (6)
  • 0.1969 in (2)
  • 0.197 in (2)
  • 0.202 in (2)
  • 0.213 in (2)
  • 0.2165 in (2)
  • 0.219 in (2)
  • 0.2362 in (2)
  • 0.25 in (2)
  • 0.255 in (2)
Cutting Width Min to Cutting Width Max
Insert Size
Insert Size
  • 3 (6)
  • 4 (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 5.33 mm (4)
  • 7.47 mm (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.2098 in (4)
  • 0.2941 in (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (8)
  • B L (6)
  • C N (8)
  • D P (6)
  • H T (8)
  • H W (8)
Back-End
Connection Type
Connection Type
  • TAPER SHANK (3)
System Size
System Size
  • PSC50 (3)
other
Cutting Condition Material
Cutting Condition Material
  • H-All (8)
  • K-All (8)
  • M-All (8)
  • N-All (8)
  • P-All (8)
  • S-All (8)
Insert Hand
Insert Hand
  • L (3)
  • R (5)
Over All Length [L]
Over All Length [L]
  • 52.0 mm (7)
  • 62.0 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 2.0472 in (7)
  • 2.4409 in (1)
Over All Length [L] Min to Over All Length [L] Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

PSC50

Cutting Units • Threading and Grooving
(3 Products)
  • Shank - PSCShank - PSC
  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
6338259 PSC50NSR4 PSC50NSR4 62.0000 2.440 35.0000 1.378 NG4R 0.68
    List price:
    $385.89 /each.
    Your price::
    Qty
    6338258 PSC50NSL3 PSC50NSL3 52.0000 2.047 35.0000 1.378 NG3L 0.69
      List price:
      $386.51 /each.
      Your price::
      Qty
      6338253 PSC50NSR3 PSC50NSR3 52.0000 2.047 35.0000 1.378 NG3R 0.79
        List price:
        $420.48 /each.
        Your price::
        Qty
        List price:
        Discount: %
        Your price::
        Replacement This item is not available
        Replacement Product This item may be available through a distributor
        Qty

        Sold in pkg. of

        ORIGINAL PRODUCT

        PSC50

        Cutting Units • Threading and Grooving
        (3 Products)
        • Shank - PSCShank - PSC
        • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
        • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
        • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
        6338255 PSC50NEL3 PSC50NEL3 52.0000 2.047 35.0000 1.378 62.0000 2.440 NG3R 0.69
          List price:
          $385.89 /each.
          Your price::
          Qty
          6338254 PSC50NER3 PSC50NER3 52.0000 2.047 35.0000 1.378 62.0000 2.440 NG3L 0.69
            List price:
            $413.12 /each.
            Your price::
            Qty
            6338256 PSC50NEL4 PSC50NEL4 52.0000 2.047 35.0000 1.378 62.0000 2.440 NG4R 0.69
              List price:
              $360.18 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              PSC50

              Cutting Units • Threading and Grooving
              (2 Products)
              • Shank - PSCShank - PSC
              • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
              • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
              • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
              6338312 PSC50NRR3 PSC50NRR3 52.0000 2.047 35.0000 1.378 64.0000 2.519 NU3L 0.69
                List price:
                $386.53 /each.
                Your price::
                Qty
                6338311 PSC50NRL3 PSC50NRL3 52.0000 2.047 35.0000 1.378 64.0000 2.519 NU3R 0.69
                  List price:
                  $385.89 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  product-image
                  Please adjust the following properties from

                  ISO Catalog Number

                  ANSI Catalog Number

                  to find similar products.
                  You are about to create a duplicate . Do you want to proceed?
                  You are about to delete Do you want to proceed?
                  What would you like to rename your to?
                  Please enter a valid name
                  Please enter a name for the duplicate
                  Please enter a valid name
                  You are about to add to your My Solutions page. Do you want to proceed?
                  Please enter a valid name
                  Send a copy of

                  Please enter a valid Email
                  Please enter a valid name

                  We have found the following CAD Drawings

                  Select the files you are looking for and download them all at once

                  You should be logged to see your dashboard information
                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                  item(s) successfully added to the cart
                  View Cart