M-Clamping • KM25
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (29)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(29)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(29)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(29)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(29)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(29)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(29)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(29)
- M Stainless Steel (27)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(27)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(27)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(27)
- K Cast Iron (29)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(29)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(29)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(29)
- N Non-Ferrous Materials (27)
- N1Wrought Aluminum (26)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(26)
- N3High-Silicon Aluminum Alloys Si >12.2%(16)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (27)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (23)
- N6Carbon, Graphite Composites, CFRP (23)
- N7MMC's (23)
- S High-Temp Alloys (27)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(27)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(27)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(27)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(27)
- H Hardened Materials (24)
- H1Hardened Materials 44-48 HRC(24)
- H2Hardened Materials 48-55 HRC(24)
- H3Hardened Materials 56-60 HRC(24)
- H4Hardened Materials >60 HRC(23)
Applications
Applications
Chamfer Turning (1)
Facing (13)
Multiple Direction Cutting (20)
Plunge Turning (2)
Profiling (22)
Turning (28)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (29)
- Lightly Interrupted Cut (29)
- Smooth Cut (29)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (2)
- 62.5 (1)
- 75.0 (3)
- 90.0 (5)
- 93.0 (12)
- 95.0 (4)
- 107.5 (2)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (16)
- 2.0 (17)
- 3.0 (8)
- 4.0 (18)
- 6.0 (8)
- 8.0 (7)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 1.1811 in(28)
- 30.0 in(1)
to
Over All Length [L]
Over All Length [L]
- 1.181 mm(1)
- 30.0 mm(28)
to
Corner Radius
Corner Radius
- 0.004 in(13)
- 0.008 in(19)
- 0.016 in(26)
- 0.024 in(2)
- 0.031 in(26)
- 0.047 in(26)
- 0.063 in(19)
- 0.094 in(3)
- 0.125 in(3)
- 0.126 in(3)
- 0.188 in(2)
- 0.25 in(1)
to
Corner Radius
Corner Radius
- 0.1 mm(13)
- 0.2 mm(19)
- 0.4 mm(26)
- 0.6 mm(2)
- 0.8 mm(26)
- 1.2 mm(26)
- 1.6 mm(19)
- 2.4 mm(3)
- 3.175 mm(3)
- 3.2 mm(3)
- 4.775 mm(2)
- 6.35 mm(1)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (21)
- CW5025 (8)
- K060 (3)
- K090 (4)
- K313 (23)
- K68 (24)
- KB1340 (10)
- KB1345 (10)
- KB1610 (20)
- KB1630 (14)
- KB5610 (11)
- KB5630 (11)
- KBH10 (20)
- KBH10B (20)
- KBH20 (20)
- KBH20B (20)
- KC5010 (27)
- KC5025 (26)
- KC5410 (19)
- KC730 (23)
- KC850 (24)
- KCK05 (23)
- KCK05B (12)
- KCK15 (26)
- KCK15B (27)
- KCK20 (27)
- KCK20B (26)
- KCM15 (26)
- KCM15B (26)
- KCM25 (26)
- KCM25B (26)
- KCM35 (23)
- KCM35B (12)
- KCP05 (23)
- KCP05B (26)
- KCP10 (26)
- KCP10B (27)
- KCP25 (23)
- KCP25B (29)
- KCP25C (29)
- KCP30 (27)
- KCP30B (19)
- KCP40 (19)
- KCP40B (23)
- KCPK05 (23)
- KCS10 (3)
- KCS10B (23)
- KCU10 (27)
- KCU10B (27)
- KCU25 (26)
- KCU25B (26)
- KD1400 (14)
- KD1405 (11)
- KD1425 (16)
- KS15 (3)
- KT315 (23)
- KT325 (3)
- KTP10 (23)
- KTP25S (16)
- KY1540 (3)
- KY3500 (20)
- KY4300 (7)
- KY4400 (23)
- KYHK15B (24)
- KYK10 (14)
- KYK25 (13)
- KYS25 (7)
- KYS30 (13)
- PB100 (3)
- SP4019 (3)
- THM (13)
- THM-X (7)
- THMF-X (10)
- TN10P (20)
- TN10U (16)
- TN15M (15)
- TN15U (18)
- TN2000 (15)
- TN20K (21)
- TN20P (26)
- TN30M (15)
- TN30P (15)
- TN4000 (15)
- TN6010 (3)
- TTS (7)
- WBH10P (11)
- WBH10U (3)
- WBH20P (20)
- WBH30P (11)
- WBK40U (4)
- WBK45U (4)
- WDN00U (7)
- WDN25U (16)
- WK05CT (27)
- WK15CT (12)
- WK20CT (27)
- WM15CT (26)
- WM25CT (26)
- WM35CT (22)
- WP05CT (5)
- WP15CT (27)
- WP25CT (29)
- WP35CT (24)
- WS10PT (26)
- WS25PT (26)
- WU10HT (26)
- WU10PT (19)
- WU25PT (19)
- X00580 (3)
- X00581 (3)
- X00582 (3)
- X00583 (3)
- X00584 (3)
- X00585 (3)
- X00586 (3)
- X00591 (3)
- X00592 (3)
- X00593 (3)
- X00594 (3)
- X00596 (3)
- X00597 (3)
- X00599 (3)
Hand Of Tool
Hand Of Tool
- L (14)
- N (2)
- R (13)
Wiper Insert
Wiper Insert
- N (29)
- Y (12)
F Dimension
F Dimension
- 0.0 mm(2)
- 7.35 mm(1)
- 13.0 mm(1)
- 16.0 mm(17)
- 22.0 mm(6)
- 28.5 mm(2)
to
F Dimension
F Dimension
- 0.0 in(2)
- 0.289 in(1)
- 0.5118 in(1)
- 0.6299 in(16)
- 0.63 in(1)
- 0.8661 in(6)
- 1.122 in(2)
to
Cutting Direction
Cutting Direction
- B (4)
- E (6)
- S (18)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (27)
- NEGATIVE-ZERO (2)
Front-End
Clamp Style
Clamp Style
- M (28)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (3)
- D-DIAMOND/RHOMBIC 55 (7)
- R-ROUND (3)
- S-SQUARE 90 (4)
- T-TRIANGLE 60 (6)
- V-DIAMOND/RHOMBIC 35 (4)
- W-TRIGON 80 (2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (23)
- B L (20)
- C A (23)
- C N (20)
- D P (16)
- H T (23)
- H W (29)
Back-End
Back-End Diameter
Back-End Diameter
- 25.0 mm(28)
to
No filters matching ""
