M-Style Clamping • For Negative Style Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (14)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(14)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(14)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(14)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(14)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(14)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(14)
- M Stainless Steel (13)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(13)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(13)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(13)
- K Cast Iron (16)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(16)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(16)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(16)
- N Non-Ferrous Materials (13)
- N1Wrought Aluminum (13)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(13)
- N3High-Silicon Aluminum Alloys Si >12.2%(9)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (13)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (9)
- N6Carbon, Graphite Composites, CFRP (9)
- N7MMC's (9)
- S High-Temp Alloys (15)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(15)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(15)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(15)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(13)
- H Hardened Materials (15)
- H1Hardened Materials 44-48 HRC(15)
- H2Hardened Materials 48-55 HRC(15)
- H3Hardened Materials 56-60 HRC(15)
- H4Hardened Materials >60 HRC(15)
Applications
Applications
Facing (7)
Multiple Direction Cutting (10)
Profiling (15)
Turning (16)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (14)
- Lightly Interrupted Cut (14)
- Smooth Cut (14)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (1)
- 50.0 (2)
- 60.0 (2)
- 75.0 (1)
- 93.0 (7)
- 95.0 (3)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (9)
- 2.0 (3)
- 3.0 (10)
- 4.0 (5)
- 6.0 (10)
- 8.0 (2)
to
Over All Length [L]
Over All Length [L]
- 4.5 in(7)
- 5.0 in(2)
- 6.0 in(5)
- 6.6929 in(1)
- 6.693 in(1)
to
Over All Length [L]
Over All Length [L]
- 114.3 mm(7)
- 127.0 mm(2)
- 152.4 mm(5)
- 170.0 mm(2)
to
Corner Radius
Corner Radius
- 0.004 in(3)
- 0.008 in(6)
- 0.016 in(16)
- 0.024 in(3)
- 0.031 in(16)
- 0.047 in(15)
- 0.063 in(11)
to
Corner Radius
Corner Radius
- 0.1 mm(3)
- 0.2 mm(6)
- 0.4 mm(16)
- 0.6 mm(3)
- 0.8 mm(16)
- 1.2 mm(15)
- 1.6 mm(11)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (12)
- CW3020 (2)
- CW5025 (7)
- PB100 (1)
- THM (8)
- THM-X (1)
- THMF-X (4)
- TN10P (9)
- TN10U (9)
- TN15M (13)
- TN15U (6)
- TN2000 (11)
- TN20K (9)
- TN20P (13)
- TN30M (13)
- TN30P (11)
- TN4000 (11)
- TN6010 (1)
- TTS (1)
- WBH10P (3)
- WBH10U (1)
- WBH20P (9)
- WBH30P (3)
- WBK45U (2)
- WDN00U (3)
- WDN25U (9)
- WK05CT (13)
- WK15CT (7)
- WK20CT (14)
- WM15CT (13)
- WM25CT (13)
- WM35CT (11)
- WP05CT (4)
- WP15CT (14)
- WP25CT (14)
- WP35CT (13)
- WS10PT (13)
- WS25PT (13)
- WU10HT (13)
- WU10PT (7)
- WU25PT (7)
Hand Of Tool
Hand Of Tool
- L (4)
- N (5)
- R (7)
Wiper Insert
Wiper Insert
- N (16)
- Y (5)
F Dimension
F Dimension
- 6.35 mm(1)
- 9.52 mm(1)
- 12.25 mm(1)
- 12.7 mm(2)
- 25.4 mm(5)
- 31.75 mm(5)
- 40.0 mm(1)
to
F Dimension
F Dimension
- 0.25 in(1)
- 0.3748 in(1)
- 0.4823 in(1)
- 0.5 in(2)
- 1.0 in(5)
- 1.25 in(5)
- 1.575 in(1)
to
Cutting Direction
Cutting Direction
- B (4)
- E (1)
- S (11)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (11)
- NEGATIVE-ZERO (5)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (3)
- D-DIAMOND/RHOMBIC 55 (2)
- S-SQUARE 90 (1)
- T-TRIANGLE 60 (7)
- W-TRIGON 80 (3)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (3)
- B L (9)
- C A (12)
- C N (7)
- D P (9)
- H W (14)
Back-End
Shank Height
Shank Height
- 0.5 in(1)
- 0.75 in(6)
- 1.0 in(7)
- 1.2598 in(1)
- 1.26 in(1)
to
Shank Height
Shank Height
- 12.7 mm(1)
- 19.05 mm(6)
- 25.4 mm(7)
- 32.0 mm(2)
to
Shank Width
Shank Width
- 0.5 in(1)
- 0.75 in(6)
- 0.984 in(1)
- 1.0 in(7)
- 1.26 in(1)
to
Shank Width
Shank Width
- 12.7 mm(1)
- 19.05 mm(6)
- 25.0 mm(1)
- 25.4 mm(7)
- 32.0 mm(1)
to
No filters matching ""
