Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

2-Edged, 90 Degree Shoulder Mill

VSM11 is a 2-Edged, 90° Victory™ Shoulder Mill (VSM) delivering low horsepower consumption, versatility and soft cutting action in light, precise machining to medium roughing. Use this shoulder mill in profiling, slotting, ramping, helical and circular interpolation, and other milling applications.  Ap capabilities up to 11mm.

All Star Logo

VSM11 is an All-Star tool. 

Order tools with same-day shipping with All-Star! Learn more.

     

Product Features

  • True 90° shoulder milling platform.
  • Aggressive ramping capability up to 10° with end mills with a diameter of 16mm.
  • Optimized chip gash for improved cutter stability and chip flow.
  • Well-guided internal coolant supply to the cutting edge.

 

 

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (149)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (133)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (149)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (149)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (149)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (149)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (149)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (149)
  • M Stainless Steel (149)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (149)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (149)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (149)
  • K Cast Iron (134)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (134)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (126)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (126)
  • N Non-Ferrous Materials (125)
    • N1
      Wrought Aluminum
      (125)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (125)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (117)
  • S High-Temp Alloys (149)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (138)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (138)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (138)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (149)
  • H Hardened Materials (105)
    • H1
      Hardened Materials 44-48 HRC
      (105)
Select All Star
  • CN (60)
  • DE (106)
  • GB (28)
  • IN (19)
  • SG (29)
  • US (53)
Applications
Applications
  • Face Milling Face Milling (77)
  • Pocket Pocket (76)
  • Pocket Helical Pocket Helical (76)
  • Pocket Milling Pocket Milling (76)
  • Profile Milling Profile Milling (14)
  • Ramping Ramping (76)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (4)
  • Shoulder Milling Shoulder Milling (77)
  • Shoulder Roughing Shoulder Roughing (76)
  • Shoulder Square End Shoulder Square End (76)
  • Slot Milling Slot Milling (50)
  • Slot Square End Slot Square End (51)
Cutting Diameter
Cutting Diameter
  • 12.0 mm (2)
  • 12.7 mm (1)
  • 15.88 mm (2)
  • 16.0 mm (6)
  • 18.0 mm (3)
  • 19.05 mm (7)
  • 20.0 mm (8)
  • 22.0 mm (3)
  • 25.0 mm (8)
  • 25.4 mm (10)
  • 30.0 mm (1)
  • 31.75 mm (5)
  • 32.0 mm (9)
  • 38.1 mm (4)
  • 40.0 mm (3)
  • 50.0 mm (2)
  • 50.8 mm (4)
  • 63.0 mm (2)
  • 63.5 mm (2)
  • 76.2 mm (1)
  • 80.0 mm (1)
  • 100.0 mm (1)
  • 101.6 mm (1)
  • 125.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.47 in (2)
  • 0.5 in (1)
  • 0.62 in (5)
  • 0.625 in (2)
  • 0.63 in (1)
  • 0.7 in (3)
  • 0.75 in (7)
  • 0.78 in (8)
  • 0.86 in (3)
  • 0.98 in (8)
  • 1.0 in (10)
  • 1.18 in (1)
  • 1.25 in (14)
  • 1.5 in (4)
  • 1.57 in (1)
  • 1.575 in (2)
  • 1.969 in (2)
  • 2.0 in (4)
  • 2.48 in (2)
  • 2.5 in (2)
  • 3.0 in (1)
  • 3.15 in (1)
  • 3.937 in (1)
  • 4.0 in (1)
  • 4.921 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.446 in (13)
  • 0.448 in (3)
  • 0.449 in (3)
  • 0.4506 in (2)
  • 0.451 in (13)
  • 0.453 in (16)
  • 0.4534 in (1)
  • 0.4539 in (1)
  • 0.454 in (10)
  • 0.4549 in (1)
  • 0.455 in (14)
  • 0.456 in (3)
  • 0.461 in (3)
  • 1.654 in (1)
  • 1.7 in (1)
  • 2.032 in (2)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 11.32 mm (13)
  • 11.38 mm (3)
  • 11.4 mm (3)
  • 11.44 mm (12)
  • 11.444 mm (2)
  • 11.46 mm (1)
  • 11.516 mm (1)
  • 11.52 mm (16)
  • 11.528 mm (1)
  • 11.53 mm (10)
  • 11.55 mm (14)
  • 11.554 mm (1)
  • 11.57 mm (3)
  • 11.71 mm (3)
  • 42.02 mm (1)
  • 43.1 mm (1)
  • 51.62 mm (2)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 20.32 mm (1)
  • 21.0 mm (4)
  • 21.44 mm (1)
  • 25.0 mm (4)
  • 25.4 mm (1)
  • 27.94 mm (3)
  • 28.0 mm (1)
  • 29.72 mm (2)
  • 30.0 mm (5)
  • 30.99 mm (3)
  • 31.0 mm (10)
  • 31.75 mm (3)
  • 32.0 mm (1)
  • 32.55 mm (1)
  • 33.0 mm (2)
  • 38.1 mm (2)
  • 39.0 mm (3)
  • 40.0 mm (15)
  • 40.64 mm (1)
  • 40.89 mm (2)
  • 41.0 mm (5)
  • 43.69 mm (2)
  • 44.45 mm (1)
  • 50.0 mm (4)
  • 50.8 mm (1)
  • 53.34 mm (2)
  • 57.14 mm (1)
  • 63.0 mm (1)
  • 63.51 mm (1)
  • 63.75 mm (1)
  • 65.0 mm (1)
  • 76.2 mm (2)
Reach Min to Reach Max
Reach
Reach
  • 0.8 in (1)
  • 0.827 in (3)
  • 0.8386 in (1)
  • 0.844 in (1)
  • 0.984 in (4)
  • 1.0 in (1)
  • 1.1 in (3)
  • 1.102 in (1)
  • 1.17 in (2)
  • 1.181 in (4)
  • 1.1811 in (1)
  • 1.22 in (11)
  • 1.2205 in (1)
  • 1.221 in (1)
  • 1.25 in (3)
  • 1.26 in (1)
  • 1.282 in (1)
  • 1.299 in (2)
  • 1.5 in (2)
  • 1.535 in (2)
  • 1.5354 in (1)
  • 1.5748 in (1)
  • 1.575 in (14)
  • 1.6 in (1)
  • 1.61 in (2)
  • 1.614 in (5)
  • 1.72 in (2)
  • 1.75 in (1)
  • 1.969 in (4)
  • 2.0 in (1)
  • 2.1 in (2)
  • 2.25 in (1)
  • 2.48 in (1)
  • 2.5 in (1)
  • 2.51 in (1)
  • 2.559 in (1)
  • 3.0 in (2)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (87)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (20)
  • Screw-On Connection (9)
  • Straight-Cylindrical (33)
  • Weldon (25)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (89)
  • 2.0 (178)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.2 mm (89)
  • 0.39 mm (93)
  • 0.4 mm (96)
  • 0.78 mm (95)
  • 0.79 mm (92)
  • 0.8 mm (100)
  • 1.2 mm (101)
  • 1.59 mm (91)
  • 1.6 mm (98)
  • 2.0 mm (93)
  • 2.4 mm (93)
  • 3.1 mm (93)
  • 3.2 mm (90)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.008 in (89)
  • 0.015 in (93)
  • 0.016 in (96)
  • 0.031 in (111)
  • 0.0313 in (89)
  • 0.047 in (101)
  • 0.062 in (96)
  • 0.0625 in (88)
  • 0.063 in (92)
  • 0.078 in (93)
  • 0.094 in (90)
  • 0.095 in (90)
  • 0.122 in (93)
  • 0.125 in (90)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WDN10U (89)
  • WK15CM (96)
  • WK15PM (91)
  • WN10HM (95)
  • WN25PM (95)
  • WP25PM (98)
  • WP35CM (98)
  • WP40PM (100)
  • WS30PM (90)
  • WS40PM (103)
  • WU20PM (91)
  • WU35PM (91)
Hand Of Tool
Hand Of Tool
  • R (87)
Wiper Insert
Wiper Insert
  • N (93)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.7 (1)
  • 0.9 (2)
  • 1.1 (1)
  • 1.2 (1)
  • 1.5 (4)
  • 1.8 (2)
  • 1.9 (5)
  • 2.5 (1)
  • 2.6 (3)
  • 2.8 (2)
  • 3.2 (1)
  • 3.6 (13)
  • 3.7 (2)
  • 4.2 (1)
  • 4.4 (1)
  • 5.1 (9)
  • 5.3 (8)
  • 6.6 (1)
  • 7.8 (8)
  • 8.6 (7)
  • 9.7 (1)
  • 10.0 (5)
  • 12.5 (2)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
frontEnd
Neck Diameter
Neck Diameter
  • 9.42 mm (2)
  • 9.95 mm (1)
  • 11.85 mm (1)
  • 13.7 mm (2)
  • 13.807 mm (1)
  • 13.81 mm (4)
  • 14.64 mm (1)
  • 16.14 mm (1)
  • 17.002 mm (1)
  • 17.02 mm (5)
  • 18.0 mm (6)
  • 18.004 mm (1)
  • 18.35 mm (1)
  • 18.8 mm (1)
  • 19.95 mm (1)
  • 22.749 mm (1)
  • 22.75 mm (6)
  • 23.16 mm (6)
  • 27.52 mm (1)
  • 29.2 mm (4)
  • 29.45 mm (7)
  • 29.454 mm (1)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 0.371 in (2)
  • 0.392 in (1)
  • 0.467 in (1)
  • 0.539 in (2)
  • 0.5436 in (1)
  • 0.544 in (4)
  • 0.576 in (1)
  • 0.635 in (1)
  • 0.67 in (6)
  • 0.7088 in (1)
  • 0.709 in (6)
  • 0.722 in (1)
  • 0.74 in (1)
  • 0.785 in (1)
  • 0.866 in (2)
  • 0.8956 in (1)
  • 0.896 in (4)
  • 0.912 in (6)
  • 1.084 in (1)
  • 1.149 in (4)
  • 1.1596 in (1)
  • 1.16 in (7)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • X-PARALLELOGRAM 75 (93)
Cutting Edge Length
Cutting Edge Length
  • 0.45 in (3)
  • 0.452 in (6)
  • 0.46 in (3)
  • 0.461 in (2)
  • 0.462 in (58)
  • 0.463 in (19)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 11.44 mm (3)
  • 11.47 mm (6)
  • 11.68 mm (3)
  • 11.72 mm (10)
  • 11.73 mm (30)
  • 11.74 mm (14)
  • 11.75 mm (21)
  • 11.76 mm (4)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • ALP (16)
  • MH (13)
  • ML (20)
  • MM (38)
  • MU (4)
Cutting Tool Material
Cutting Tool Material
  • D P (2)
  • H W (91)
Tolerance Class
Tolerance Class
  • C (40)
  • P (53)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (58)
  • SCREW-ON (9)
  • SHELL MILL (20)
Back-End Diameter
Back-End Diameter
  • 0.47 in (1)
  • 0.4724 in (1)
  • 0.512 in (1)
  • 0.625 in (3)
  • 0.6299 in (1)
  • 0.63 in (10)
  • 0.71 in (2)
  • 0.75 in (15)
  • 0.7874 in (1)
  • 0.79 in (9)
  • 0.827 in (2)
  • 0.87 in (4)
  • 0.98 in (8)
  • 0.9843 in (2)
  • 1.0 in (10)
  • 1.06 in (1)
  • 1.14 in (1)
  • 1.142 in (3)
  • 1.25 in (4)
  • 1.26 in (6)
  • 1.5 in (1)
  • 1.58 in (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 12.0 mm (2)
  • 13.0 mm (1)
  • 15.87 mm (3)
  • 16.0 mm (11)
  • 18.0 mm (2)
  • 19.0 mm (7)
  • 19.04 mm (1)
  • 19.05 mm (6)
  • 19.06 mm (1)
  • 20.0 mm (10)
  • 21.0 mm (2)
  • 22.0 mm (4)
  • 25.0 mm (10)
  • 25.39 mm (1)
  • 25.4 mm (8)
  • 25.41 mm (1)
  • 27.0 mm (1)
  • 29.0 mm (4)
  • 31.7 mm (4)
  • 32.0 mm (6)
  • 38.1 mm (1)
  • 40.0 mm (1)
Back-End Diameter Min to Back-End Diameter Max
hidden
Category Path
Category Path
other
Grade
Grade
  • WDN10U (2)
  • WK15CM (9)
  • WK15PM (4)
  • WN10HM (8)
  • WN25PM (8)
  • WP25PM (11)
  • WP35CM (11)
  • WP40PM (13)
  • WS30PM (3)
  • WS40PM (16)
  • WU20PM (4)
  • WU35PM (4)
Platform
Platform
  • VSM11 (176)
Tool Unit
Tool Unit
  • I (130)
  • M (143)
Insert Hand
Insert Hand
  • R (93)
Number of Inserts
Number of Inserts
  • 1.0 (3)
  • 2.0 (17)
  • 3.0 (25)
  • 4.0 (16)
  • 5.0 (7)
  • 6.0 (6)
  • 8.0 (5)
  • 9.0 (4)
  • 11.0 (1)
  • 20.0 (2)
  • 30.0 (1)
Number of Inserts Min to Number of Inserts Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (12)
  • 42.7 mm (1)
  • 44.45 mm (1)
  • 47.94 mm (1)
  • 48.0 mm (1)
  • 50.0 mm (2)
  • 50.8 mm (1)
  • 53.75 mm (1)
  • 54.0 mm (1)
  • 62.6 mm (2)
  • 63.0 mm (1)
  • 63.51 mm (1)
  • 64.5 mm (2)
  • 67.0 mm (1)
  • 69.85 mm (1)
  • 70.0 mm (3)
  • 76.2 mm (2)
  • 79.0 mm (1)
  • 81.0 mm (3)
  • 81.28 mm (2)
  • 82.0 mm (1)
  • 82.55 mm (1)
  • 88.0 mm (3)
  • 88.9 mm (2)
  • 96.0 mm (2)
  • 100.0 mm (6)
  • 101.6 mm (4)
  • 110.0 mm (3)
  • 114.3 mm (2)
  • 115.06 mm (1)
  • 120.0 mm (2)
  • 121.92 mm (3)
  • 130.0 mm (3)
  • 132.08 mm (1)
  • 170.0 mm (5)
  • 170.18 mm (2)
  • 203.2 mm (2)
  • 210.0 mm (2)
  • 248.92 mm (1)
  • 250.0 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 1.575 in (12)
  • 1.681 in (1)
  • 1.75 in (1)
  • 1.887 in (1)
  • 1.89 in (1)
  • 1.969 in (2)
  • 2.0 in (1)
  • 2.116 in (1)
  • 2.126 in (1)
  • 2.465 in (2)
  • 2.48 in (1)
  • 2.5 in (1)
  • 2.539 in (2)
  • 2.6378 in (1)
  • 2.75 in (1)
  • 2.756 in (3)
  • 3.0 in (2)
  • 3.1102 in (1)
  • 3.189 in (3)
  • 3.2 in (2)
  • 3.2283 in (1)
  • 3.25 in (1)
  • 3.397 in (2)
  • 3.465 in (3)
  • 3.5 in (2)
  • 3.7795 in (2)
  • 3.937 in (4)
  • 4.0 in (4)
  • 4.331 in (3)
  • 4.5 in (2)
  • 4.53 in (1)
  • 4.724 in (2)
  • 4.8 in (3)
  • 5.118 in (3)
  • 5.2 in (1)
  • 6.693 in (5)
  • 6.7 in (2)
  • 8.0 in (2)
  • 8.268 in (2)
  • 9.8 in (1)
  • 9.843 in (1)
Over All Length [L] Min to Over All Length [L] Max
Head Length [L2]
Head Length [L2]
  • 20.32 mm (1)
  • 21.0 mm (4)
  • 21.44 mm (1)
  • 25.0 mm (4)
  • 25.4 mm (1)
  • 27.94 mm (3)
  • 28.0 mm (1)
  • 29.72 mm (2)
  • 30.0 mm (5)
  • 30.99 mm (3)
  • 31.0 mm (10)
  • 31.75 mm (3)
  • 32.0 mm (1)
  • 32.55 mm (1)
  • 33.0 mm (2)
  • 38.1 mm (2)
  • 39.0 mm (3)
  • 40.0 mm (3)
  • 40.64 mm (1)
  • 40.89 mm (2)
  • 41.0 mm (5)
  • 43.69 mm (2)
  • 50.0 mm (2)
  • 53.34 mm (2)
  • 57.14 mm (1)
  • 63.75 mm (1)
  • 65.0 mm (1)
Head Length [L2] Min to Head Length [L2] Max
Head Length [L2]
Head Length [L2]
  • 0.8 in (1)
  • 0.827 in (3)
  • 0.8386 in (1)
  • 0.844 in (1)
  • 0.984 in (4)
  • 1.0 in (1)
  • 1.1 in (3)
  • 1.102 in (1)
  • 1.17 in (2)
  • 1.181 in (4)
  • 1.1811 in (1)
  • 1.22 in (11)
  • 1.2205 in (1)
  • 1.221 in (1)
  • 1.25 in (3)
  • 1.26 in (1)
  • 1.282 in (1)
  • 1.299 in (2)
  • 1.5 in (2)
  • 1.535 in (2)
  • 1.5354 in (1)
  • 1.5748 in (1)
  • 1.575 in (2)
  • 1.6 in (1)
  • 1.61 in (2)
  • 1.614 in (5)
  • 1.72 in (2)
  • 1.969 in (2)
  • 2.1 in (2)