M1600 • 43° • Frese a manicotto • Sistema metrico

Name: M1600 • 43° • Frese a manicotto • Sistema metrico
SKU: 3837977

M1600 • Frese a manicotto • Frese a spianare per acciaio e ghisa a basso costo per tagliente

Metric

Inch

Codice materiale SAP	3837977
Codice catalogo ISO	M1600D080Z07S27ON06
Codice catalogo ANSI	M1600D080Z07S27ON06
[D1] Diametro di taglio effettivo	80.0000 mm
[D1] Diametro di taglio effettivo	3.149 in
[D1MAX] Diametro di taglio massimo	90.7320 mm
[D1MAX] Diametro di taglio massimo	3.572 in
[D] Dia adattatore / stelo / foro	27.0 mm
[D] Dia adattatore / stelo / foro	1.063 in
[D6] Diametro mozzo	60.0000 mm
[D6] Diametro mozzo	2.362 in
[L] Lunghezza complessiva	50.0000 mm
[L] Lunghezza complessiva	1.968 in
[L1] Lunghezza spessore	50.0000 mm
[L1] Lunghezza spessore	1.968 in
[LBX] Lunghezza massima del corpo	50.0000 mm
[LBX] Lunghezza massima del corpo	1.968 in
[AP1MAX] 1° profondità di taglio massima	3.7000 mm
[AP1MAX] 1° profondità di taglio massima	.1457 in
Numero di inserti	7
Adduzione refrigerante	Y
Peso in chilogrammi	0.97

See all Product Variants

Uses and application

Spianatura
Contornatura/fresatura a spallamento: Smusso leggero

Workpiece Materials

P Acciaio

M Acciai inossidabili

K Ghisa

N Materiali non ferrosi

S Leghe resistenti al calore

H Materiali temprati

Guida alla selezione degli inserti

	Obróbka lekka		Obróbka średnia		Obróbka ciężka
Grupa materiałowa	Geometria	Gatunek	Geometria	Gatunek	Geometria	Gatunek
P1–P2	.S..MM	WP35CM	.S..MM	WP35CM	.S..MM	WU20PM
P3–P4	.S..MM	WP35CM	.S..MM	WP35CM	.S..MM	WU20PM
P5–P6	.S..MM	WP35CM	.S..MM	WP35CM	.S..MM	WP35CM
M1–M2	.S..MM	WU20PM	.S..MM	WU20PM	.S..MM	WU20PM
M3	.S..MM	WP35CM	.S..MM	WP35CM	.S..MM	WP35CM
K1–K2	.S..MM	WK15CM	.S..MM	WK15CM	.S..MM	WU20PM
K3	.S..MM	WU20PM	.S..MM	WU20PM	.S..MM	WK15CM
N1–N2	.S..MM	WU20PM	.S..MM	WU20PM	.S..MM	WU20PM
N3	.S..MM	WU20PM	.S..MM	WU20PM	.S..MM	WU20PM
S1–S2	.S..MM	WU20PM	.S..MM	WU20PM	.S..MM	WU20PM
S3	.S..MM	WU20PM	.S..MM	WU20PM	.S..MM	WU20PM
S4	.S..MM	WP35CM	.S..MM	WU20PM	.S..MM	WU20PM
H1	.S..MM	WU20PM	–	–	–	–

Geometria płytki	Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae)															Geometria płytki
	5%			10%			20%			30%			40–100%
.S..MM	0,26	0,85	1,42	0,19	0,62	1,01	0,14	0,46	0,75	0,12	0,40	0,66	0,11	0,37	0,60	.S..MM

Obróbka lekka

Obróbka średnia

Obróbka ciężka

Obróbka lekka

Obróbka średnia

Obróbka ciężka

Geometria płytki	Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae)															Geometria płytki
	5%			10%			20%			30%			40-100%
.S..MM	.010	.034	.056	.007	.024	.040	.005	.018	.030	.005	.016	.026	.004	.014	.024	.S..MM

Grupa materiałowa		WP35CM			WK15CM			WU20PM
P	1	455	395	370	—	—	—	330	290	270
	2	280	255	230	—	—	—	275	250	200
	3	255	230	205	—	—	—	255	220	175
	4	190	175	160	—	—	—	225	190	150
	5	260	230	210	—	—	—	185	175	150
	6	160	135	110	—	—	—	165	130	100
M	1	205	185	155	—	—	—	205	180	165
	2	185	160	140	—	—	—	185	160	130
	3	145	130	115	—	—	—	140	120	95
K	1	295	265	240	420	385	340	250	220	185
	2	235	210	190	335	295	275	200	180	150
	3	195	175	160	280	250	230	180	150	120
N	1	—	—	—	—	—	—	550	470	400
	2	—	—	—	—	—	—	550	470	400
	3	—	—	—	—	—	—	400	350	300
S	1	—	—	—	—	—	—	40	35	25
	2	—	—	—	—	—	—	40	35	25
	3	—	—	—	—	—	—	50	40	25
	4	—	—	—	—	—	—	70	50	35
H	1	—	—	—	—	—	—	110	80	70

Grupa materiałowa		WP35CM			WK15CM			WU20PM
P	1	1490	1300	1210	—	—	—	1080	950	890
	2	920	840	750	—	—	—	900	820	660
	3	840	750	670	—	—	—	840	720	570
	4	620	570	520	—	—	—	740	620	490
	5	850	750	690	—	—	—	610	570	490
	6	520	440	—	—	—	—	540	430	330
M	1	670	610	510	—	—	—	670	590	540
	2	610	520	460	—	—	—	610	520	430
	3	480	430	380	—	—	—	460	390	310
K	1	970	870	790	1380	1260	1120	820	720	610
	2	770	690	620	1100	970	900	660	590	490
	3	640	570	520	920	820	750	590	490	390
N	1	—	—	—	—	—	—	1800	1540	1310
	2	—	—	—	—	—	—	1800	1540	1310
	3	—	—	—	—	—	—	1310	1150	980
S	1	—	—	—	—	—	—	130	110	80
	2	—	—	—	—	—	—	130	110	80
	3	—	—	—	—	—	—	160	130	80
	4	—	—	—	—	—	—	230	160	110
H	1	—	—	—	—	—	—	360	260	230

Parti di ricambio for M1600 • 43° • Frese a manicotto • Sistema metrico

VITE

RICAMBIO

TORX DRIVER TX15

Spare Part ANTI-SEIZE LUBRICANT

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO Catalogo	Grade

Product Suggestions

Product Family suggestions

Notifications

M1600 • 43° • Frese a manicotto • Sistema metrico