Country

Lingua

Unità di misura

Prezzo di listino:

Sconto: %

Prezzo di listino:

$22.33 /each

Your price::

Qty

SDS

VSM490™-15 • XNPU-ML • Lavorazione leggera

Name: VSM490™-15 • XNPU-ML • Lavorazione leggera
SKU: 5883098
Rating: 0 (0 reviews)

Inserti • XNPU-ML • Lavorazione leggera

Metric

Inch

Codice materiale SAP	5883098
Codice catalogo ISO	XNPU15T608ERML
Codice catalogo ANSI	XNPU1502ERML
Qualità	WP40PM
Taglienti per inserto	4
[LI] Lunghezza inserto	16.1 mm
[LI] Lunghezza inserto	.634 in
[S] Spessore inserto	6.88 mm
[S] Spessore inserto	.271 in
[W] Larghezza dell’inserto	10 mm
[W] Larghezza dell’inserto	.394 in
[BS] Lunghezza sfaccettatura spigolo	1.9 mm
[BS] Lunghezza sfaccettatura spigolo	.073 in
[Rε] Raggio di punta	0.8 mm
[Rε] Raggio di punta	.032 in
Spessore medio del truciolo [HM]	0.08 mm
Spessore medio del truciolo [HM]	.003 in

Visualizzare tutte le varianti del prodotto

Materiale da lavorare

P Acciaio

M Acciai inossidabili

S Leghe resistenti al calore

Features and benefits

La geometria -ML è la prima scelta per la lavorazione dell'acciaio
inossidabile. Con forze di taglio ridotte, questo è consigliato
per migliorare le capacità di finitura delle pareti negli acciai.

Lato macchina

Lato pezzo

Guida alla selezione degli inserti

	Light Machining		General Purpose		Heavy Machining
Material Group	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	XNGU-ML	WP40PM	XNPU-MM	WP40PM	XNPU-MM	WP40PM
P3–P4	XNGU-ML	WP40PM	XNPU-MM	WP40PM	XNPU-MM	WP40PM
P5–P6	XNGU-MM	WP25PM	XNPU-MM	WP35CM	XNPU-MM	WP40PM
M1–M2	XNGU-ML	WS40PM	XNGU-ML	WS40PM	XNPU-MM	WS40PM
M3	XNGU-ML	WS40PM	XNGU-ML	WS40PM	XNPU-MM	WS40PM
K1–K2	XNPU-MM	WK15PM	XNGU-MH	WK15CM	XNGU-MH	WK15CM
K3	XNPU-MM	WK15PM	XNGU-MH	WP35CM	XNGU-MH	WP35CM
N1–N2	XNGU-ALP	WN25PM	XNGU-ALP	WN25PM	XNGU-ALP	WN25PM
N3	XNGU-ALP	WN25PM	XNGU-ALP	WN25PM	XNGU-ALP	WN25PM
S1–S2	XNGU-ML	WP25PM	XNGU-ML	WS40PM	XNPU-MM	WS40PM
S3	XNGU-ML	WS40PM	XNGU-ML	WS40PM	XNPU-MM	WS40PM
S4	XNGU-ML	WS40PM	XNGU-ML	WS40PM	XNPU-MM	WS40PM
H1	–	–	–	–	–	–

Avanzamenti iniziali consigliati [mm]

	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..ALP	0,11	0,23	0,35	0,08	0,17	0,25	0,06	0,13	0,19	0,05	0,11	0,16	0,05	0,10	0,15	.E..ALP
.E..ML	0,17	0,31	0,46	0,13	0,23	0,33	0,09	0,17	0,25	0,08	0,15	0,22	0,08	0,14	0,20	.E..ML
.S..MM	0,22	0,40	0,64	0,16	0,29	0,46	0,12	0,22	0,34	0,10	0,19	0,30	0,10	0,18	0,28	.S..MM
.S..MH	0,23	0,45	0,74	0,17	0,33	0,54	0,13	0,24	0,40	0,11	0,21	0,35	0,10	0,20	0,32	.S..MH

Light Machining

General Purpose

Heavy Machining

Recommended Starting Feeds [IPT]

	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
.E..ALP	.005	.008	.012	.003	.006	.009	.002	.004	.007	.002	.004	.006	.002	.004	.005	.E..ALP
.E..ML	.007	.012	.018	.005	.009	.013	.004	.006	.010	.003	.006	.008	.003	.005	.008	.E..ML
.S..MM	.008	.015	.024	.006	.011	.017	.005	.008	.013	.004	.007	.011	.004	.007	.010	.S..MM
.S..MH	.009	.017	.028	.006	.012	.020	.005	.009	.015	.004	.008	.013	.004	.007	.012	.S..MH

Light Machining

General Purpose

Heavy Machining

Velocità iniziali consigliate [m/min]*

Material Group		WK15CM			WK15PM			WN25PM			WP25PM			WP35CM			WP40PM			WS40PM			WU35PM
P	1	–	–	–	–	–	–	–	–	–	330	285	270	455	395	370	295	260	245	–	–	–	260	230	215
	2	–	–	–	–	–	–	–	–	–	275	240	200	280	255	230	250	215	180	–	–	–	220	190	160
	3	–	–	–	–	–	–	–	–	–	255	215	175	255	230	205	230	195	160	–	–	–	200	170	140
	4	–	–	–	–	–	–	–	–	–	225	185	150	190	175	160	205	170	135	–	–	–	180	150	120
	5	–	–	–	–	–	–	–	–	–	185	170	150	260	230	210	170	155	135	170	145	120	150	135	120
	6	–	–	–	–	–	–	–	–	–	165	125	100	160	135	110	150	115	90	150	110	80	130	100	80
M	1	–	–	–	–	–	–	–	–	–	205	180	165	205	185	155	195	170	155	210	170	140	170	150	135
	2	–	–	–	–	–	–	–	–	–	185	160	130	185	160	140	175	150	125	180	145	120	155	130	110
	3	–	–	–	–	–	–	–	–	–	140	120	95	145	130	115	130	115	90	145	110	85	115	100	80
K	1	420	385	340	270	245	215	–	–	–	230	205	185	295	265	240	–	–	–	–	–	–	–	–	–
	2	335	295	275	210	190	175	–	–	–	180	160	150	235	210	190	–	–	–	–	–	–	–	–	–
	3	280	250	230	175	160	145	–	–	–	150	135	120	195	175	160	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	1075	945	875	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	945	875	760	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	945	875	760	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	40	35	25	–	–	–	–	–	–	40	35	25	35	30	25
	2	–	–	–	–	–	–	–	–	–	40	35	25	–	–	–	–	–	–	40	35	25	35	30	25
	3	–	–	–	–	–	–	–	–	–	50	40	25	–	–	–	–	–	–	50	40	25	45	35	25
	4	–	–	–	–	–	–	–	–	–	70	50	35	–	–	–	–	–	–	60	50	30	60	45	30
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Recommended Starting Speeds [SFM]*

Material Group		WK15CM			WK15PM			WN25PM			WP25PM			WP35CM			WP40PM			WS40PM			WU35PM
P	1	–	–	–	–	–	–	–	–	–	1085	935	885	1495	1295	1215	970	855	805	–	–	–	855	755	705
	2	–	–	–	–	–	–	–	–	–	900	785	655	920	835	755	820	705	590	–	–	–	720	625	525
	3	–	–	–	–	–	–	–	–	–	835	705	575	835	755	675	755	640	525	–	–	–	655	560	460
	4	–	–	–	–	–	–	–	–	–	740	605	490	625	575	525	675	560	445	–	–	–	590	490	395
	5	–	–	–	–	–	–	–	–	–	605	560	490	855	755	690	560	510	445	560	475	395	490	445	395
	6	–	–	–	–	–	–	–	–	–	540	410	330	525	445	360	490	375	295	490	360	260	425	330	260
M	1	–	–	–	–	–	–	–	–	–	675	590	540	675	605	510	640	560	510	690	560	460	560	490	445
	2	–	–	–	–	–	–	–	–	–	605	525	425	605	525	460	575	490	410	590	475	395	510	425	360
	3	–	–	–	–	–	–	–	–	–	460	395	310	475	425	375	425	375	295	475	360	280	375	330	260
K	1	1380	1265	1115	885	805	705	–	–	–	755	675	605	970	870	785	–	–	–	–	–	–	–	–	–
	2	1100	970	900	690	625	575	–	–	–	590	525	490	770	690	625	–	–	–	–	–	–	–	–	–
	3	920	820	755	575	525	475	–	–	–	490	445	395	640	575	525	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	3525	3100	2870	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	3100	2870	2495	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	3100	2870	2495	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	130	115	80	–	–	–	130	115	100	130	115	80	115	100	80
	2	–	–	–	–	–	–	–	–	–	130	115	80	–	–	–	130	115	100	130	115	80	115	100	80
	3	–	–	–	–	–	–	–	–	–	165	130	80	–	–	–	165	130	100	165	130	80	150	115	80
	4	–	–	–	–	–	–	–	–	–	230	165	115	–	–	–	215	165	115	195	165	100	195	150	100
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO Catalogo	Grade

Benvenuto

Conferma le tue preferenze

Aggiorna preferenze

Suggerimenti sui prodotti

Product Family suggestions

Contatta il Team di vendita

Contatta il Team di vendita

Modifica della soluzione

Soluzione aggiunta

VSM490™-15 • XNPU-ML • Lavorazione leggera

Inserti • XNPU-ML • Lavorazione leggera

Materiale da lavorare

Features and benefits

Lato macchina

Lato pezzo

Guida alla selezione degli inserti

Avanzamenti iniziali consigliati [mm]

Recommended Starting Feeds [IPT]

Velocità iniziali consigliate [m/min]*

Recommended Starting Speeds [SFM]*

Suggerimenti sui prodotti

Product Family suggestions

Contatta il Team di vendita

Notifications

Contatta il Team di vendita

Sending to SolidCAM in progress...

VSM490™-15 • XNPU-ML • Lavorazione leggera

Inserti • XNPU-ML • Lavorazione leggera

Materiale da lavorare

Features and benefits

Lato macchina

Lato pezzo

Guida alla selezione degli inserti

Avanzamenti iniziali consigliati [mm]

Recommended Starting Feeds [IPT]

Velocità iniziali consigliate [m/min]*

Recommended Starting Speeds [SFM]*

The following files are available