successfully added to cart
View Cart

Metallo duro H/P • Sgrossatura

Metallo duro H/P • Sgrossatura

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (71)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (58)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (58)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (58)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (71)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (71)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (71)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (27)
  • M Stainless Steel (100)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (100)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (100)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (100)
  • K Cast Iron (71)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (71)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (71)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (71)
  • S High-Temp Alloys (100)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (100)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (73)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (92)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (65)
  • H Hardened Materials (71)
    • H1
      Hardened Materials 44-48 HRC
      (71)
    • H2
      Hardened Materials 48-55 HRC
      (13)
    • H3
      Hardened Materials 56-60 HRC
      (13)
Select First Choice
  • CN (17)
  • DE (50)
  • GB (15)
  • IN (3)
  • US (45)
Applications
  • Drilling Drilling (6)
  • Face Milling Face Milling (55)
  • Flat Bottom Drilling Flat Bottom Drilling (6)
  • Pocket Pocket (111)
  • Pocket Helical Pocket Helical (117)
  • Pocket Milling Pocket Milling (111)
  • Ramping Ramping (124)
  • Shoulder Milling Shoulder Milling (159)
  • Shoulder Roughing Shoulder Roughing (75)
  • Shoulder Square End Shoulder Square End (159)
  • Slot Ball Nose Slot Ball Nose (29)
  • Slot Milling Slot Milling (144)
  • Slot Square End Slot Square End (159)
Cutting Diameter
  • 3.0 (2)
  • 4.0 (4)
  • 4.763 (2)
  • 5.0 (4)
  • 6.0 (11)
  • 6.35 (7)
  • 7.0 (2)
  • 7.938 (3)
  • 8.0 (12)
  • 9.525 (11)
  • 10.0 (11)
  • 11.0 (1)
  • 12.0 (12)
  • 12.7 (12)
  • 14.0 (4)
  • 15.875 (8)
  • 16.0 (13)
  • 18.0 (1)
  • 19.05 (16)
  • 20.0 (7)
  • 25.0 (4)
  • 25.4 (12)
to
Cutting Diameter
  • 0.1181 (2)
  • 0.157 (2)
  • 0.1575 (2)
  • 0.1875 (2)
  • 0.1969 (2)
  • 0.197 (2)
  • 0.236 (4)
  • 0.2362 (7)
  • 0.25 (7)
  • 0.276 (2)
  • 0.3125 (3)
  • 0.315 (12)
  • 0.375 (11)
  • 0.3937 (6)
  • 0.394 (5)
  • 0.433 (1)
  • 0.472 (5)
  • 0.4724 (7)
  • 0.5 (12)
  • 0.551 (2)
  • 0.5512 (2)
  • 0.625 (8)
  • 0.6299 (8)
  • 0.63 (5)
  • 0.7087 (1)
  • 0.75 (16)
  • 0.787 (3)
  • 0.7874 (4)
  • 0.984 (1)
  • 0.9843 (3)
  • 1.0 (12)
to
Cutting Length
  • 0.236 (1)
  • 0.2362 (1)
  • 0.2756 (2)
  • 0.3125 (1)
  • 0.315 (5)
  • 0.375 (3)
  • 0.3937 (3)
  • 0.394 (1)
  • 0.433 (2)
  • 0.472 (1)
  • 0.4724 (1)
  • 0.5 (5)
  • 0.5118 (6)
  • 0.512 (5)
  • 0.625 (7)
  • 0.6299 (7)
  • 0.63 (6)
  • 0.748 (1)
  • 0.75 (6)
  • 0.7874 (1)
  • 0.8125 (2)
  • 0.866 (4)
  • 0.8661 (6)
  • 0.875 (6)
  • 0.9843 (1)
  • 1.0 (6)
  • 1.0236 (6)
  • 1.024 (7)
  • 1.25 (8)
  • 1.2598 (8)
  • 1.26 (4)
  • 1.496 (3)
  • 1.4961 (3)
  • 1.5 (16)
  • 1.625 (1)
  • 1.7717 (2)
  • 1.772 (1)
  • 1.875 (1)
  • 2.0 (2)
  • 2.25 (7)
to
Cutting Length
  • 6.0 (2)
  • 7.0 (2)
  • 7.938 (1)
  • 8.0 (5)
  • 9.525 (3)
  • 10.0 (4)
  • 11.0 (2)
  • 12.0 (2)
  • 12.7 (5)
  • 13.0 (11)
  • 15.875 (7)
  • 16.0 (13)
  • 19.0 (1)
  • 19.05 (6)
  • 20.0 (1)
  • 20.638 (2)
  • 22.0 (10)
  • 22.225 (6)
  • 25.0 (1)
  • 25.4 (6)
  • 26.0 (13)
  • 31.75 (8)
  • 32.0 (12)
  • 38.0 (6)
  • 38.1 (16)
  • 41.275 (1)
  • 45.0 (3)
  • 47.625 (1)
  • 50.8 (2)
  • 57.15 (7)
to
Reach
  • 6.0 (1)
  • 7.0 (2)
  • 7.938 (1)
  • 8.0 (4)
  • 9.525 (2)
  • 10.0 (3)
  • 11.0 (2)
  • 12.0 (1)
  • 12.7 (3)
  • 13.0 (8)
  • 15.875 (3)
  • 16.0 (9)
  • 18.0 (1)
  • 19.0 (1)
  • 19.05 (5)
  • 20.638 (1)
  • 20.955 (1)
  • 21.0 (1)
  • 22.0 (7)
  • 22.225 (5)
  • 24.0 (1)
  • 25.4 (4)
  • 26.0 (10)
  • 27.0 (1)
  • 28.575 (1)
  • 30.0 (1)
  • 31.75 (5)
  • 32.0 (10)
  • 36.0 (1)
  • 36.83 (1)
  • 38.0 (6)
  • 38.1 (11)
  • 41.275 (1)
  • 44.0 (1)
  • 45.0 (1)
  • 45.72 (2)
  • 47.625 (1)
  • 48.0 (1)
  • 48.26 (1)
  • 50.8 (2)
  • 57.15 (9)
  • 60.0 (1)
  • 64.77 (1)
  • 65.0 (1)
  • 67.31 (1)
  • 75.0 (1)
  • 76.2 (1)
to
Reach
  • 0.236 (1)
  • 0.2756 (2)
  • 0.3125 (1)
  • 0.315 (4)
  • 0.375 (2)
  • 0.3937 (2)
  • 0.394 (1)
  • 0.433 (2)
  • 0.472 (1)
  • 0.5 (4)
  • 0.5118 (3)
  • 0.512 (5)
  • 0.625 (3)
  • 0.6299 (3)
  • 0.63 (6)
  • 0.7087 (1)
  • 0.748 (1)
  • 0.75 (5)
  • 0.8125 (1)
  • 0.825 (1)
  • 0.8268 (1)
  • 0.866 (4)
  • 0.8661 (3)
  • 0.875 (5)
  • 0.9449 (1)
  • 1.0 (4)
  • 1.0236 (3)
  • 1.024 (7)
  • 1.063 (1)
  • 1.125 (1)
  • 1.1811 (1)
  • 1.25 (5)
  • 1.2598 (6)
  • 1.26 (4)
  • 1.4173 (1)
  • 1.45 (1)
  • 1.496 (3)
  • 1.4961 (3)
  • 1.5 (10)
  • 1.625 (1)
  • 1.7323 (1)
  • 1.772 (1)
  • 1.8 (2)
  • 1.875 (1)
  • 1.8898 (1)
  • 1.9 (1)
  • 2.0 (2)
  • 2.25 (9)
  • 2.3622 (1)
  • 2.55 (1)
  • 2.5591 (1)
  • 2.65 (1)
  • 2.9528 (1)
  • 3.0 (1)
to
Connection Style
  • Straight-Cylindrical (76)
  • Weldon (83)
Internal Coolant Capability
cornerConfiguration
Corner Style
  • CHAMFER (74)
  • RADIUS (85)
Corner Radius
  • 0.0 (74)
  • 0.25 (4)
  • 0.254 (2)
  • 0.3 (6)
  • 0.45 (7)
  • 0.5 (10)
  • 0.508 (3)
  • 0.75 (4)
  • 0.762 (22)
  • 1.0 (6)
  • 1.016 (3)
  • 1.27 (18)
to
Corner Radius
  • 0.0 (74)
  • 0.0098 (4)
  • 0.01 (2)
  • 0.0118 (6)
  • 0.0177 (7)
  • 0.0197 (9)
  • 0.02 (4)
  • 0.0295 (1)
  • 0.03 (25)
  • 0.039 (2)
  • 0.0394 (4)
  • 0.04 (3)
  • 0.05 (18)
to
Corner Chamfer
  • 0.0 (79)
  • 0.01 (3)
  • 0.0118 (21)
  • 0.012 (1)
  • 0.014 (2)
  • 0.0157 (2)
  • 0.0197 (37)
  • 0.02 (7)
  • 0.0236 (4)
  • 0.039 (1)
  • 0.0441 (1)
  • 0.394 (1)
to
Corner Chamfer
  • 0.0 (79)
  • 0.05 (1)
  • 0.25 (3)
  • 0.3 (21)
  • 0.305 (1)
  • 0.35 (2)
  • 0.4 (2)
  • 0.5 (37)
  • 0.508 (6)
  • 0.6 (4)
  • 1.0 (2)
  • 1.12 (1)
to
application
Grade Of Cutting Tool
  • ALTIN-MW (13)
  • TIALN-LT (14)
  • TIALN-LW (1)
  • TICN-CT (1)
  • TICN-CW (9)
  • WP15PE (92)
  • WS15PE (29)
Rough Finish
  • R (156)
  • SFR (3)
Maximum Ramp Angle
  • 5.0 (15)
to
frontEnd
Neck Diameter
  • 5.5 (1)
  • 5.64 (1)
  • 5.969 (1)
  • 7.5 (1)
  • 7.52 (1)
  • 8.954 (2)
  • 9.4 (1)
  • 9.5 (1)
  • 11.0 (1)
  • 11.28 (1)
  • 11.938 (2)
  • 14.923 (1)
  • 15.0 (1)
  • 15.04 (1)
  • 17.907 (2)
  • 18.8 (1)
  • 23.5 (1)
  • 23.876 (1)
  • 24.0 (1)
to
Neck Diameter
  • 0.2165 (1)
  • 0.222 (1)
  • 0.235 (1)
  • 0.2953 (1)
  • 0.2961 (1)
  • 0.3525 (2)
  • 0.3701 (1)
  • 0.374 (1)
  • 0.4331 (1)
  • 0.4441 (1)
  • 0.47 (2)
  • 0.5875 (1)
  • 0.5906 (1)
  • 0.5921 (1)
  • 0.705 (2)
  • 0.7402 (1)
  • 0.9252 (1)
  • 0.94 (1)
  • 0.9449 (1)
to
backEnd
Back-End Diameter
  • 0.1875 (2)
  • 0.2362 (21)
  • 0.25 (7)
  • 0.3125 (3)
  • 0.315 (14)
  • 0.375 (11)
  • 0.3937 (11)
  • 0.4724 (13)
  • 0.5 (12)
  • 0.5512 (4)
  • 0.625 (8)
  • 0.6299 (13)
  • 0.7087 (1)
  • 0.75 (16)
  • 0.7874 (7)
  • 0.9843 (4)
  • 1.0 (12)
to
Back-End Diameter
  • 4.763 (2)
  • 6.0 (21)
  • 6.35 (7)
  • 7.938 (3)
  • 8.0 (14)
  • 9.525 (11)
  • 10.0 (11)
  • 12.0 (13)
  • 12.7 (12)
  • 14.0 (4)
  • 15.875 (8)
  • 16.0 (13)
  • 18.0 (1)
  • 19.05 (16)
  • 20.0 (7)
  • 25.0 (4)
  • 25.4 (12)
to
other
Grade
  • ALTIN-MW (13)
  • TIALN-LT (14)
  • TIALN-LW (1)
  • TICN-CT (1)
  • TICN-CW (9)
  • WP15PE (92)
  • WS15PE (29)
Platform
  • Series 4906 (21)
  • Series 4940 (5)
  • Series 4976 (9)
  • Series 49H6 (4)
  • Series 49N6 (6)
  • Series 4M0R (14)
  • Series 4Q03 (9)
  • Series 4QN3 (3)
  • Series 4S0R (22)
  • Series 4U40 (1)
  • Series 4U50 (13)
  • Series 4U70 (12)
  • Series 4U80 (29)
  • Series DQ13 (11)
Tool Unit
  • I (71)
  • M (88)
kmtConfigurable
  • true (153)
  • false (6)
Over All Length [L]
  • 50.8 (7)
  • 54.0 (2)
  • 55.0 (2)
  • 57.0 (17)
  • 63.0 (14)
  • 63.5 (15)
  • 72.0 (11)
  • 76.2 (9)
  • 83.0 (17)
  • 88.9 (9)
  • 92.0 (14)
  • 101.6 (18)
  • 104.0 (7)
  • 114.3 (2)
  • 121.0 (4)
  • 127.0 (10)
  • 139.7 (1)
to
Over All Length [L]
  • 2.0 (7)
  • 2.126 (2)
  • 2.165 (2)
  • 2.244 (6)
  • 2.2441 (11)
  • 2.48 (6)
  • 2.4803 (8)
  • 2.5 (16)
  • 2.8346 (6)
  • 2.835 (5)
  • 3.0 (9)
  • 3.2677 (9)
  • 3.268 (8)
  • 3.5 (8)
  • 3.622 (14)
  • 4.0 (18)
  • 4.094 (3)
  • 4.0945 (4)
  • 4.5 (2)
  • 4.7638 (3)
  • 4.764 (1)
  • 5.0 (10)
  • 5.5 (1)
to
Head Length [L2]
  • 18.0 (1)
  • 24.0 (1)
  • 30.0 (1)
  • 36.0 (1)
  • 48.0 (1)
  • 57.15 (3)
  • 60.0 (1)
  • 75.0 (1)
to
Head Length [L2]
  • 0.7087 (1)
  • 0.9449 (1)
  • 1.1811 (1)
  • 1.4173 (1)
  • 1.8898 (1)
  • 2.25 (3)
  • 2.3622 (1)
  • 2.9528 (1)
to
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

High-Performance Solid Carbide End Mills • Roughing

Series 4U80 • Inch
(17 Products)
  • Dimensioni utensile: Configurazione del vano: X (variabile) Dimensioni utensile: Configurazione del vano: X (variabile)
  • Angolo elica: 45°Angolo elica: 45°
  • Corner Style: Corner RadiusTipo angolo Raggio di puntaCorner Style: Corner RadiusTipo angolo Raggio di punta
  • Scanalatura: Testa pianaScanalatura: Testa piana
  • Fresatura in rampa: GrezzoFresatura in rampa: Grezzo
  • Contornatura/fresatura a spallamento: Testa pianaContornatura/fresatura a spallamento: Testa piana
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Adapter Style Machine Side [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length
6441861 4U80E0700R2BT 4U80E0700R2BT   WS15PE Straight-Cylindrical 0.7620 .0300 4 6.3500 .2500 6.35 .25 19.0500 .7500 63.5000 2.500
    List price:
    $66.21 /each.
    Your price::
    Qty
    6441864 4U80E1300R5BT 4U80E1300R5BT   WS15PE Straight-Cylindrical 0.7620 .0300 4 12.7000 .5000 12.7 .5 31.7500 1.250 76.2000 3.000
      List price:
      $116.22 /each.
      Your price::
      Qty
      6441865 4U80E1600R6BT 4U80E1600R6BT   WS15PE Straight-Cylindrical 0.7620 .0300 6 15.8750 .6250 15.875 .625 47.6250 1.875 101.6000 4.000
        List price:
        $193.40 /each.
        Your price::
        Qty
        6441863 4U80E1000R4BT 4U80E1000R4BT   WS15PE Straight-Cylindrical 0.7620 .0300 4 9.5250 .3750 9.525 .375 22.2250 .8750 63.5000 2.500
          List price:
          $89.99 /each.
          Your price::
          Qty
          6664874 4U80E2502R8XW 4U80E2502R8XW   ALTIN-MW Weldon 1.2700 .0500 6 25.4000 1.000 25.4 1.0 57.1500 2.250 127.0000 5.000
            List price:
            $395.87 /each.
            Your price::
            Qty
            6664866 4U80E1600R6BW 4U80E1600R6BW   ALTIN-MW Weldon 0.7620 .0300 6 15.8750 .6250 15.875 .625 31.7500 1.250 88.9000 2.500
              List price:
              $187.77 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              High-Performance Solid Carbide End Mills • Roughing

              Series 4Q03 4Q05 4Q43 • Inch
              (9 Products)
              • Fresatura in rampa: GrezzoFresatura in rampa: Grezzo
              • Scanalatura: Testa pianaScanalatura: Testa piana
              • Contornatura/fresatura a spallamento: Testa pianaContornatura/fresatura a spallamento: Testa piana
              • Corner Style: Corner RadiusTipo angolo Raggio di puntaCorner Style: Corner RadiusTipo angolo Raggio di punta
              • 3850338503
              • Dimensioni utensile: Configurazione del vano: X (variabile) Dimensioni utensile: Configurazione del vano: X (variabile)
              • Codolo —  Cilindrico  liscioCodolo — Cilindrico liscio
              • Codolo —  Cilindrico  WeldonCodolo — Cilindrico Weldon
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Adapter Style Machine Side [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length
              5576674 4Q0305000XT 4Q0305000XT   WP15PE Straight-Cylindrical 0.2540 .0100 3 4.7630 .1875 4.763 .1875 15.8750 .6250 50.8000 2.000
                List price:
                $49.53 /each.
                Your price::
                Qty
                5576675 4Q0307002XW 4Q0307002XW   WP15PE Weldon 0.5080 .0200 3 6.3500 .2500 6.35 .25 19.0500 .7500 63.5000 2.500
                  List price:
                  $56.97 /each.
                  Your price::
                  Qty