Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

Search results for

Select Filters
Filters
Filters
    • Applied Filters:
    • Clear all filters
  • X allCategories: Grooving and Cut-Off
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1377)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1377)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1377)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1377)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1377)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1377)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1377)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1377)
  • M Stainless Steel (1379)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1379)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1379)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1379)
  • K Cast Iron (1381)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1381)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1381)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1381)
  • N Non-Ferrous Materials (1365)
    • N1
      Wrought Aluminum
      (1365)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1365)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1365)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (122)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1365)
    • N6
      Carbon, Graphite Composites, CFRP
      (1365)
    • N7
      MMC's
      (122)
  • S High-Temp Alloys (1373)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1373)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1373)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1373)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1373)
  • H Hardened Materials (515)
    • H1
      Hardened Materials 44-48 HRC
      (515)
    • H2
      Hardened Materials 48-55 HRC
      (514)
    • H3
      Hardened Materials 56-60 HRC
      (2)
    • H4
      Hardened Materials >60 HRC
      (2)
Select All Star
  • CN (132)
  • DE (273)
  • GB (15)
  • IN (78)
  • SG (61)
  • US (399)
Applications
Applications
  • Back Boring Back Boring (54)
  • Boring Boring (12)
  • Chamfer Turning Chamfer Turning (36)
  • Cut-Off Cut-Off (507)
  • Deep Grooving Deep Grooving (60)
  • Face Grooving Face Grooving (729)
  • Facing Facing (124)
  • Grooving Grooving (981)
  • ID Facing ID Facing (86)
  • ID Grooving ID Grooving (623)
  • ID Thread Turning ID Thread Turning (44)
  • Multiple Direction Cutting Multiple Direction Cutting (20)
  • OD Thread Turning OD Thread Turning (66)
  • Plunge Turning Plunge Turning (347)
  • Profiling Profiling (239)
  • TRN Boring TRN Boring (32)
  • Threading Threading (67)
  • Turning Turning (151)
Type of Thread
Type of Thread
  • 60 (106)
  • ACME (65)
  • API RD (44)
  • BSW (23)
  • BUTTRESS (21)
  • STUB ACME (44)
  • UN (92)
  • UNJ (23)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1151)
  • Lightly Interrupted Cut (1153)
  • Smooth Cut (1091)
  • Varying Depth of Cut (1083)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (648)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (106)
  • Cutoff Support Blade A1-A3 (15)
  • Toolholder (425)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (603)
  • 2.0 (826)
  • 3.0 (3)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (3)
  • 0.003 in (145)
  • 0.0035 in (68)
  • 0.004 in (205)
  • 0.005 in (23)
  • 0.0057 in (3)
  • 0.0059 in (68)
  • 0.006 in (69)
  • 0.0065 in (62)
  • 0.007 in (109)
  • 0.0075 in (288)
  • 0.0077 in (68)
  • 0.0078 in (91)
  • 0.0079 in (74)
  • 0.008 in (273)
  • 0.0088 in (23)
  • 0.009 in (128)
  • 0.0093 in (23)
  • 0.0098 in (4)
  • 0.01 in (198)
  • 0.011 in (1)
  • 0.0118 in (28)
  • 0.012 in (274)
  • 0.0125 in (156)
  • 0.013 in (23)
  • 0.0135 in (23)
  • 0.014 in (22)
  • 0.015 in (19)
  • 0.0156 in (52)
  • 0.0157 in (129)
  • 0.0158 in (51)
  • 0.016 in (181)
  • 0.017 in (44)
  • 0.0197 in (43)
  • 0.0223 in (32)
  • 0.0225 in (99)
  • 0.023 in (34)
  • 0.0236 in (1)
  • 0.024 in (208)
  • 0.0295 in (43)
  • 0.03 in (179)
  • 0.031 in (233)
  • 0.0313 in (3)
  • 0.0314 in (49)
  • 0.0315 in (157)
  • 0.032 in (108)
  • 0.039 in (68)
  • 0.0394 in (90)
  • 0.0433 in (2)
  • 0.0463 in (23)
  • 0.0469 in (3)
  • 0.047 in (131)
  • 0.0472 in (9)
  • 0.0492 in (86)
  • 0.059 in (85)
  • 0.0591 in (149)
  • 0.06 in (58)
  • 0.062 in (67)
  • 0.0625 in (80)
  • 0.0689 in (87)
  • 0.078 in (47)
  • 0.0787 in (170)
  • 0.079 in (49)
  • 0.0797 in (34)
  • 0.0886 in (64)
  • 0.094 in (153)
  • 0.098 in (26)
  • 0.0984 in (57)
  • 0.0994 in (38)
  • 0.118 in (32)
  • 0.1181 in (32)
  • 0.1191 in (33)
  • 0.125 in (88)
  • 0.156 in (37)
  • 0.1575 in (37)
  • 0.1585 in (15)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (3)
  • 0.076 mm (73)
  • 0.08 mm (98)
  • 0.089 mm (55)
  • 0.09 mm (52)
  • 0.1 mm (39)
  • 0.102 mm (205)
  • 0.13 mm (23)
  • 0.15 mm (136)
  • 0.16 mm (11)
  • 0.165 mm (62)
  • 0.17 mm (108)
  • 0.18 mm (1)
  • 0.185 mm (36)
  • 0.19 mm (165)
  • 0.191 mm (211)
  • 0.198 mm (23)
  • 0.2 mm (272)
  • 0.202 mm (49)
  • 0.203 mm (193)
  • 0.22 mm (2)
  • 0.224 mm (23)
  • 0.23 mm (57)
  • 0.235 mm (23)
  • 0.24 mm (1)
  • 0.25 mm (147)
  • 0.254 mm (51)
  • 0.26 mm (39)
  • 0.28 mm (1)
  • 0.3 mm (288)
  • 0.31 mm (100)
  • 0.315 mm (64)
  • 0.318 mm (136)
  • 0.33 mm (23)
  • 0.34 mm (23)
  • 0.35 mm (1)
  • 0.356 mm (21)
  • 0.38 mm (19)
  • 0.397 mm (2)
  • 0.4 mm (218)
  • 0.43 mm (44)
  • 0.5 mm (43)
  • 0.565 mm (10)
  • 0.57 mm (23)
  • 0.572 mm (91)
  • 0.575 mm (46)
  • 0.58 mm (32)
  • 0.59 mm (34)
  • 0.6 mm (188)
  • 0.61 mm (154)
  • 0.75 mm (216)
  • 0.76 mm (126)
  • 0.78 mm (49)
  • 0.787 mm (99)
  • 0.8 mm (171)
  • 1.0 mm (158)
  • 1.1 mm (2)
  • 1.19 mm (33)
  • 1.191 mm (2)
  • 1.194 mm (91)
  • 1.195 mm (23)
  • 1.2 mm (40)
  • 1.25 mm (86)
  • 1.5 mm (234)
  • 1.525 mm (58)
  • 1.585 mm (48)
  • 1.588 mm (74)
  • 1.59 mm (77)
  • 1.6 mm (1)
  • 1.75 mm (87)
  • 1.98 mm (23)
  • 1.981 mm (24)
  • 2.0 mm (151)
  • 2.025 mm (34)
  • 2.25 mm (64)
  • 2.38 mm (49)
  • 2.388 mm (104)
  • 2.5 mm (83)
  • 2.525 mm (38)
  • 3.0 mm (64)
  • 3.025 mm (33)
  • 3.175 mm (87)
  • 3.18 mm (10)
  • 3.96 mm (23)
  • 3.962 mm (14)
  • 4.0 mm (37)
  • 4.025 mm (15)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (852)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (852)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (533)
  • Lightly Interrupted Cut (533)
  • Smooth Cut (498)
  • Varying Depth of Cut (495)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CG55 (2)
  • CW2015 (2)
  • CW5025 (2)
  • HK1500 (2)
  • HK15M (2)
  • PB100 (2)
  • PB250 (2)
  • RC3503 (2)
  • SP0A00 (2)
  • SPTM00 (2)
  • THM (121)
  • THM X (1)
  • THM-F (2)
  • THM-X (2)
  • THMF-X (2)
  • TN10P (69)
  • TN200 (6)
  • TN2000 (2)
  • TN25M (3)
  • TN35 (3)
  • TN4000 (2)
  • TN450 (3)
  • TN5015 (3)
  • TN5120 (3)
  • TN5515 (3)
  • TN6010 (230)
  • TN6025 (347)
  • TN6026 (1)
  • TN6030 (7)
  • TN7010 (3)
  • TN7015 (3)
  • TN7025 (3)
  • TN7035 (3)
  • TN7110 (104)
  • TN7115 (3)
  • TN7125 (3)
  • TN7135 (1)
  • TN7525 (21)
  • TN7535 (22)
  • TN8025 (6)
  • TPC25 (6)
  • TPC35 (6)
  • TTI15 (2)
  • TTI25 (3)
  • TTM (3)
  • TTM08 (3)
  • TTM09 (12)
  • TTMS (2)
  • TTR (3)
  • TTR-X (3)
  • TTS (3)
  • TTX (3)
  • WBH25U (2)
  • WDN25U (3)
  • WK15CM (1)
  • WK20CT (3)
  • WM35CT (6)
  • WP10CT (216)
  • WP15CT (3)
  • WP25CT (214)
  • WP35CM (3)
  • WP35CT (3)
  • WS25PT (66)
  • WU10HT (156)
  • WU10PT (512)
  • WU20PM (3)
  • WU25PT (784)
  • WU35CT (17)
  • WU35PT (141)
Hand Of Tool
Hand Of Tool
  • L (240)
  • N (24)
  • R (282)
Wiper Insert
Wiper Insert
  • N (1311)
  • Y (155)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (54)
  • 11.176 mm (2)
  • 11.5 mm (2)
  • 15.875 mm (2)
  • 16.0 mm (2)
  • 18.5 mm (2)
  • 18.542 mm (2)
  • 20.0 mm (8)
  • 20.32 mm (1)
  • 22.0 mm (2)
  • 25.0 mm (8)
  • 25.4 mm (2)
  • 26.0 mm (2)
  • 28.575 mm (1)
  • 28.58 mm (1)
  • 30.0 mm (1)
  • 31.75 mm (6)
  • 32.0 mm (7)
  • 34.0 mm (4)
  • 34.92 mm (2)
  • 34.925 mm (2)
  • 38.0 mm (6)
  • 40.39 mm (4)
  • 41.0 mm (4)
  • 41.3 mm (28)
  • 44.0 mm (2)
  • 44.45 mm (2)
  • 46.99 mm (7)
  • 47.0 mm (8)
  • 47.6 mm (26)
  • 50.8 mm (2)
  • 52.0 mm (10)
  • 54.0 mm (7)
  • 54.1 mm (3)
  • 55.88 mm (1)
  • 56.625 mm (3)
  • 57.15 mm (15)
  • 57.2 mm (12)
  • 60.325 mm (2)
  • 63.5 mm (7)
  • 69.85 mm (4)
  • 70.0 mm (14)
  • 76.2 mm (1)
  • 88.9 mm (139)
  • 100.0 mm (17)
  • 101.6 mm (2)
  • 139.7 mm (164)
  • 174.6 mm (56)
  • 209.6 mm (43)
  • 222.3 mm (26)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (54)
  • 0.44 in (2)
  • 0.453 in (2)
  • 0.625 in (2)
  • 0.6299 in (2)
  • 0.728 in (2)
  • 0.73 in (2)
  • 0.7874 in (8)
  • 0.8 in (1)
  • 0.8661 in (2)
  • 0.9843 in (8)
  • 1.0 in (2)
  • 1.0236 in (2)
  • 1.125 in (2)
  • 1.181 in (1)
  • 1.25 in (6)
  • 1.2598 in (7)
  • 1.339 in (4)
  • 1.375 in (4)
  • 1.496 in (4)
  • 1.4961 in (2)
  • 1.59 in (4)
  • 1.614 in (4)
  • 1.626 in (28)
  • 1.7323 in (2)
  • 1.75 in (2)
  • 1.85 in (15)
  • 1.874 in (26)
  • 2.0 in (2)
  • 2.047 in (6)
  • 2.0472 in (4)
  • 2.126 in (7)
  • 2.13 in (3)
  • 2.2 in (1)
  • 2.229 in (3)
  • 2.25 in (15)
  • 2.252 in (12)
  • 2.375 in (2)
  • 2.5 in (7)
  • 2.75 in (4)
  • 2.7559 in (9)
  • 2.756 in (5)
  • 3.0 in (1)
  • 3.5 in (139)
  • 3.937 in (17)
  • 4.0 in (2)
  • 5.5 in (164)
  • 6.874 in (56)
  • 8.252 in (43)
  • 8.752 in (26)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.787 in (4)
  • 0.7874 in (15)
  • 1.0236 in (15)
  • 1.024 in (2)
  • 1.062 in (2)
  • 1.125 in (2)
  • 1.25 in (2)
  • 1.26 in (27)
  • 2.047 in (5)
  • 2.0472 in (3)
  • 2.7559 in (4)
  • 2.756 in (6)
  • 3.937 in (13)
  • 4.0 in (2)
  • 8.0 in (2)
  • 8.0709 in (9)
  • 8.071 in (8)
  • 16.0 in (12)
  • 393.661 in (470)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 20.0 mm (19)
  • 25.999 mm (7)
  • 26.0 mm (10)
  • 26.975 mm (2)
  • 28.575 mm (2)
  • 31.75 mm (2)
  • 32.0 mm (27)
  • 52.0 mm (8)
  • 70.0 mm (10)
  • 100.0 mm (13)
  • 101.6 mm (2)
  • 203.2 mm (2)
  • 205.0 mm (17)
  • 406.4 mm (12)
  • 9999.0 mm (470)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (444)
  • S (102)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (52)
  • NEUTRAL (ZERO) (111)
  • POSITIVE-ZERO (48)
Maximum Bore Depth
Maximum Bore Depth
  • 0.9449 in (2)
  • 1.0 in (9)
  • 1.231 in (1)
  • 1.2323 in (1)
  • 1.25 in (4)
  • 1.2598 in (2)
  • 1.29 in (1)
  • 1.5 in (5)
  • 1.5748 in (2)
  • 1.5864 in (2)
  • 1.5947 in (2)
  • 1.88 in (2)
  • 1.9685 in (2)
  • 1.97 in (8)
  • 1.9793 in (2)
  • 1.9803 in (2)
  • 2.0 in (18)
  • 2.5 in (5)
  • 2.5196 in (1)
  • 2.52 in (14)
  • 2.54 in (2)
  • 3.0 in (2)
  • 3.148 in (1)
  • 3.1496 in (1)
  • 3.15 in (3)
  • 3.31 in (2)
  • 3.32 in (2)
  • 3.92 in (2)
  • 3.936 in (2)
  • 4.0 in (6)
  • 5.0 in (3)
  • 5.0392 in (2)
  • 6.0 in (2)
  • 6.2992 in (3)
  • 7.0 in (2)
  • 7.874 in (1)
  • 8.0 in (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 24.0 mm (2)
  • 25.4 mm (9)
  • 31.26 mm (1)
  • 31.3 mm (1)
  • 31.75 mm (4)
  • 32.0 mm (2)
  • 32.766 mm (1)
  • 38.1 mm (5)
  • 40.0 mm (2)
  • 40.295 mm (2)
  • 40.506 mm (2)
  • 48.0 mm (2)
  • 50.0 mm (10)
  • 50.275 mm (2)
  • 50.3 mm (2)
  • 50.8 mm (18)
  • 63.5 mm (5)
  • 64.0 mm (15)
  • 64.4 mm (2)
  • 76.2 mm (2)
  • 80.0 mm (5)
  • 84.0 mm (2)
  • 84.4 mm (2)
  • 100.0 mm (4)
  • 101.6 mm (6)
  • 127.0 mm (3)
  • 128.0 mm (2)
  • 152.4 mm (2)
  • 160.0 mm (3)
  • 177.8 mm (2)
  • 200.0 mm (1)
  • 203.2 mm (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (106)
frontEnd
Clamp Style
Clamp Style
  • C (18)
  • M (45)
  • N (110)
  • S (32)
  • W (3)
  • Y (391)
Cutting Width
Cutting Width
  • 0.0197 in (42)
  • 0.031 in (46)
  • 0.0315 in (43)
  • 0.0394 in (92)
  • 0.041 in (24)
  • 0.047 in (100)
  • 0.0472 in (89)
  • 0.055 in (10)
  • 0.0551 in (43)
  • 0.058 in (41)
  • 0.059 in (26)
  • 0.0591 in (96)
  • 0.062 in (127)
  • 0.0669 in (42)
  • 0.0689 in (87)
  • 0.072 in (46)
  • 0.0768 in (43)
  • 0.078 in (48)
  • 0.0787 in (177)
  • 0.0788 in (68)
  • 0.079 in (124)
  • 0.0837 in (69)
  • 0.084 in (41)
  • 0.0866 in (87)
  • 0.088 in (25)
  • 0.0886 in (65)
  • 0.094 in (226)
  • 0.0984 in (166)
  • 0.0988 in (68)
  • 0.099 in (68)
  • 0.1083 in (89)
  • 0.118 in (154)
  • 0.1181 in (195)
  • 0.1182 in (68)
  • 0.12 in (2)
  • 0.122 in (2)
  • 0.123 in (140)
  • 0.125 in (303)
  • 0.126 in (46)
  • 0.1278 in (41)
  • 0.128 in (47)
  • 0.1287 in (2)
  • 0.13 in (70)
  • 0.1378 in (110)
  • 0.147 in (25)
  • 0.151 in (41)
  • 0.156 in (87)
  • 0.157 in (101)
  • 0.1574 in (67)
  • 0.1575 in (127)
  • 0.158 in (83)
  • 0.1614 in (3)
  • 0.162 in (49)
  • 0.1624 in (51)
  • 0.163 in (46)
  • 0.1673 in (47)
  • 0.1683 in (2)
  • 0.1771 in (66)
  • 0.1772 in (65)
  • 0.187 in (50)
  • 0.1872 in (49)
  • 0.1875 in (57)
  • 0.188 in (112)
  • 0.189 in (81)
  • 0.192 in (76)
  • 0.1921 in (49)
  • 0.193 in (24)
  • 0.195 in (46)
  • 0.1968 in (28)
  • 0.1969 in (48)
  • 0.197 in (74)
  • 0.2018 in (29)
  • 0.202 in (50)
  • 0.2165 in (19)
  • 0.2166 in (9)
  • 0.236 in (72)
  • 0.2362 in (54)
  • 0.241 in (77)
  • 0.2411 in (34)
  • 0.249 in (32)
  • 0.25 in (104)
  • 0.255 in (35)
  • 0.281 in (32)
  • 0.312 in (42)
  • 0.315 in (44)
  • 0.317 in (24)
  • 0.3199 in (26)
  • 0.32 in (27)
  • 0.3209 in (4)
  • 0.3213 in (5)
  • 0.375 in (9)
  • 0.38 in (10)
  • 0.3986 in (10)
  • 0.3996 in (3)
  • 0.4 in (5)
  • 0.48 in (7)
  • 0.4803 in (4)
  • 0.5594 in (2)
  • 0.6378 in (4)
  • 0.6382 in (4)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (42)
  • 0.787 mm (46)
  • 0.8 mm (43)
  • 1.0 mm (92)