-
P Steel (1)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (1)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (1)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (1)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (1)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (1)
-
-
M Stainless Steel (1)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (1)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (1)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (1)
-
-
K Cast Iron (1)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (1)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (1)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (1)
-
-
N Non-Ferrous Materials (1)
-
N1Wrought Aluminum (1)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (1)
-
N3High-Silicon Aluminum Alloys Si >12.2% (1)
-
N4Copper, Brass, Zinc-based on machinability index range of 70-100 (1)
-
N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1)
-
N6Carbon, Graphite Composites, CFRP (1)
-
N7MMC's (1)
-
-
S High-Temp Alloys (1)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (1)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (1)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (1)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (1)
-
-
H Hardened Materials (1)
-
H1Hardened Materials 44-48 HRC (1)
-
H2Hardened Materials 48-55 HRC (1)
-
H3Hardened Materials 56-60 HRC (1)
-
H4Hardened Materials >60 HRC (1)
-
-
Multiple Direction Cutting (1)
-
Profiling (1)
-
TRN Boring (1)
-
Heavily Interrupted Cut (1)
-
Lightly Interrupted Cut (1)
-
Smooth Cut (1)
-
1.0 (1)
-
2.0 (1)
-
4.0 (1)
-
0.004 in (1)
-
0.008 in (1)
-
0.016 in (1)
-
0.031 in (1)
-
0.047 in (1)
-
0.1 mm (1)
-
0.2 mm (1)
-
0.4 mm (1)
-
0.8 mm (1)
-
1.201 mm (1)
-
CW2015 (1)
-
CW5025 (1)
-
TN10P (1)
-
TN10U (1)
-
TN15M (1)
-
TN15U (1)
-
TN20K (1)
-
TN20P (1)
-
TN30M (1)
-
TN6010 (1)
-
WBH10C (1)
-
WBH10P (1)
-
WBH10U (1)
-
WBH20P (1)
-
WBH25P (1)
-
WBH30P (1)
-
WDN25U (1)
-
WK05CT (1)
-
WK20CT (1)
-
WM15CT (1)
-
WM25CT (1)
-
WM35CT (1)
-
WP15CT (1)
-
WP25CT (1)
-
WP35CT (1)
-
WS10PT (1)
-
WS25PT (1)
-
WU10HT (1)
-
WU10PT (1)
-
WU25PT (1)
-
B H (1)
-
B L (1)
-
C A (1)
-
C N (1)
-
D P (1)
-
H W (1)
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | Gage Insert | [GAAP] Axial Rake Angle | [L1] Tool Length | [L1] Tool Length | [DM] Minimum Bore Diameter | [DM] Minimum Bore Diameter | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3883412 | A20UMVUNR3 | A20UMVUNR3 | WG | 31.75 | 1.25 | VN..332 | -5 | 355.6 | 14 | 43.307 | 1.705 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
定価:
$348.49
/各
価格::
数量
|