内部切削ユニット • レイダウンねじ切り
内部切削ユニット • レイダウンねじ切り
内部切削ユニット • レイダウンねじ切り
内部切削ユニット • レイダウンねじ切り

LSE 90°

内部切削ユニット • レイダウンねじ切り

使用法と用途

  • Shank - PSCShank - PSC
  • メーカー仕様:ISO 26623メーカー仕様:ISO 26623
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
フィルタを選択
Filters
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (10)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (10)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (10)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (10)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (10)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (10)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (10)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (10)
  • M Stainless Steel (10)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (10)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (10)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (10)
  • K Cast Iron (10)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (10)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (10)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (10)
  • N Non-Ferrous Materials (10)
    • N1
      Wrought Aluminum (10)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (10)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (10)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (10)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (10)
    • N6
      Carbon, Graphite Composites, CFRP (10)
    • N7
      MMC's (10)
  • S High-Temp Alloys (10)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (10)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (10)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (10)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (10)
  • H Hardened Materials (10)
    • H1
      Hardened Materials 44-48 HRC (10)
Type of Thread
Type of Thread
  • 55 (10)
  • 60 (10)
  • ACME (10)
  • API (2)
  • API BUTTRESS (2)
  • API RD (8)
  • BSPT (8)
  • BSW (10)
  • M (10)
  • NPT (8)
  • NPTF (8)
  • RD DIN 405 (10)
  • STUB ACME (10)
  • TR DIN 103 (10)
  • UN (8)
  • UNJ (8)
Over All Length [L]
Over All Length [L]
  • 2.757 in (2)
  • 2.953 in (2)
  • 3.543 in (2)
  • 4.134 in (4)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 70.0 mm (2)
  • 75.0 mm (2)
  • 90.0 mm (2)
  • 105.0 mm (4)
Over All Length [L] Min to Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (4)
  • 0.002 in (8)
  • 0.003 in (8)
  • 0.004 in (4)
  • 0.006 in (8)
  • 0.008 in (8)
  • 0.012 in (2)
  • 0.017 in (2)
  • 0.028 in (4)
  • 0.037 in (5)
  • 0.055 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (4)
  • 0.05 mm (8)
  • 0.076 mm (8)
  • 0.1 mm (4)
  • 0.151 mm (8)
  • 0.2 mm (8)
  • 0.301 mm (2)
  • 0.426 mm (2)
  • 0.701 mm (4)
  • 0.925 mm (5)
  • 1.401 mm (1)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HCK20 (4)
  • K00331 (4)
  • K15 (9)
  • K68 (4)
  • KC5010 (4)
  • KC5025 (10)
  • KC710 (5)
  • KC720 (9)
  • KC722 (4)
  • KC730 (10)
  • KU25T (4)
  • P25 (9)
  • SP4066 (4)
  • TN6025 (10)
Hand Of Tool
Hand Of Tool
  • L (5)
  • R (5)
F Dimension
F Dimension
  • 14.0 mm (2)
  • 17.0 mm (2)
  • 22.0 mm (2)
  • 27.0 mm (4)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.551 in (2)
  • 0.669 in (2)
  • 0.866 in (2)
  • 1.063 in (4)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 25.0 mm (2)
  • 32.0 mm (2)
  • 40.0 mm (2)
  • 50.0 mm (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.984 in (2)
  • 1.26 in (2)
  • 1.575 in (2)
  • 1.969 in (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Bore Depth
Maximum Bore Depth
  • 1.655 in (2)
  • 1.891 in (2)
  • 2.52 in (2)
  • 3.15 in (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 42.0 mm (2)
  • 48.0 mm (2)
  • 64.0 mm (2)
  • 80.0 mm (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
No filters matching ""
以下に示すパラメータのいずれかを使用して表示列を変更することができます。最大7列まで表示できます。
表示 1- 10 / 10 結果
列を選択
フィルタを選択
メートル
インチ
表示
メートル
インチ
SAP Material Number ISO Catalog Number ANSI Catalog Number [L4] Maximum Boring Depth [L4] Maximum Boring Depth [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side Gage Insert [L1] Tool Length [L1] Tool Length [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension Weight Kilograms
6341523 PSC63S18ELSEL16 PSC63S18ELSEL16 42 1.653 18.5 .7283 LT16NL 70 2.755 25 .9843 14 .5512 1.11
    定価:
    $691.57 /各
    価格::
    数量
    6341528 PSC63S18ELSER16 PSC63S18ELSER16 42 1.653 18.5 .7283 LT16NR 70 2.755 25 .9843 14 .5512 1.11
      定価:
      $691.57 /各
      価格::
      数量
      6341524 PSC63S25XLSEL16 PSC63S25XLSEL16 48 1.889 24.5 .9646 LT16NL 75 2.952 32 1.259 17 .6693 1.19
        定価:
        $691.57 /各
        価格::
        数量
        6341529 PSC63S25XLSER16 PSC63S25XLSER16 48 1.889 24.5 .9646 LT16NR 75 2.952 32 1.259 17 .6693 1.19
          定価:
          $691.57 /各
          価格::
          数量
          6341525 PSC63S32GLSEL16 PSC63S32GLSEL16 64 2.519 32 1.259 LT16NL 90 3.543 40 1.574 22 .8661 1.36
            定価:
            $691.57 /各
            価格::
            数量
            6341531 PSC63S32GLSER16 PSC63S32GLSER16 64 2.519 32 1.259 LT16NR 90 3.543 40 1.574 22 .8661 1.36
              定価:
              $691.57 /各
              価格::
              数量
              6341526 PSC63S40XLSEL16 PSC63S40XLSEL16 80 3.149 40 1.574 LT16NL 105 4.133 50 1.968 27 1.063 1.75
                定価:
                $691.57 /各
                価格::
                数量
                6341527 PSC63S40XLSEL22 PSC63S40XLSEL22 80 3.149 40 1.574 LT22NL 105 4.133 50 1.968 27 1.063 1.73
                  定価:
                  $691.57 /各
                  価格::
                  数量
                  6341533 PSC63S40XLSER16 PSC63S40XLSER16 80 3.149 40 1.574 LT16NR 105 4.133 50 1.968 27 1.063 1.75
                    定価:
                    $691.57 /各
                    価格::
                    数量
                    6341534 PSC63S40XLSER22 PSC63S40XLSER22 80 3.149 40 1.574 LT22NR 105 4.133 50 1.968 27 1.063 1.73
                      定価:
                      $691.57 /各
                      価格::
                      数量
                      定価:
                      割引: %
                      価格::
                      配置転換 この品目はありません
                      交換品 この品目は、代理店経由で入手できる場合があります
                      数量

                      販売包装単位

                      product-image
                      Please adjust the following properties from

                      ISO製品型番

                      ANSI製品型番

                      to find similar products.

                      The following files are available

                      Please select a file to download

                      Models

                      Product data

                      複製を作成しようとしています . 続行しますか?
                      削除しようとしています 続行しますか?
                      削除しようとしています and all items within that folder. 続行しますか?
                      Are you sure you want to permanently delete these items?
                      の名前を何に変更しますか?

                      A folder with the name already exists .

                      有効な名前を入力してください
                      重複の名前を入力してください
                      有効な名前を入力してください
                      マイソリューションページにを追加しようとしています. 続行しますか?

                      A folder with the name already exists .

                      有効な名前を入力してください
                      次のコピーを送信

                      Oops, you have used your own email address! Please enter another email address to proceed.

                      An active user does not exist under that email address. Please Click Here , to send a registration invitation to


                      有効なメールアドレスを入力してください
                      有効な名前を入力してください
                      ダッシュボード情報を表示するには、ログインする必要があります
                      Session expired due to inactivity, please login again
                      カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
                      アイテムがカートに正常に追加されました
                      カートを表示
                      DOWNLOAD TYPE:



                      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                      Minimum quantity should be

                      SAP Material Number ISO製品型番 材種    
                      Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                      You are about to leave the Solution building process.

                      Are you sure you want to leave?