通知

すべて既読にする
Mobile Menu
Weldon® End Mills • Inch
Weldon® End Mills • Inch
Weldon® End Mills • Inch
Weldon® End Mills • Inch

M100 • Weldon® End Mills • iC12 • Inch

Weldon® End Mills • Inch

特徴と利点

  • General purpose face and copy milling.

  • Anti-rotation feature for top security.

使用法と用途

  • シャンク — ストレートWeldon 2 フラットシャンク — ストレートWeldon 2 フラット
  • 3Dプロファイル加工3Dプロファイル加工
  • 側面加工/ショルダー加工:ボールノーズ側面加工/ショルダー加工:ボールノーズ
  • 溝加工:スクエアエンド溝加工:スクエアエンド
  • フェイスミーリングフェイスミーリング
  • ランピング加工:ブランクランピング加工:ブランク
  • ポケット溝加工ポケット溝加工
  • ヘリカルミーリングヘリカルミーリング
  • ミーリング — スルークーラントミーリング — スルークーラント

ワーク材料

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
フィルタを選択
Filters
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (2)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2)
  • M Stainless Steel (2)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2)
  • K Cast Iron (2)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2)
  • N Non-Ferrous Materials (2)
    • N1
      Wrought Aluminum
      (2)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
  • S High-Temp Alloys (2)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2)
  • H Hardened Materials (2)
    • H1
      Hardened Materials 44-48 HRC
      (2)
    • H2
      Hardened Materials 48-55 HRC
      (2)
    • H3
      Hardened Materials 56-60 HRC
      (2)
Applications
Applications
  • Face Milling Face Milling (2)
  • Pocket Pocket (2)
  • Pocket Helical Pocket Helical (2)
  • Pocket Milling Pocket Milling (2)
  • Profile Milling Profile Milling (2)
  • Ramping Ramping (2)
  • Shoulder Ball Nose Shoulder Ball Nose (2)
  • Shoulder Milling Shoulder Milling (2)
  • Slot Milling Slot Milling (2)
  • Slot Square End Slot Square End (2)
Cutting Diameter
Cutting Diameter
  • 0.582 in (1)
  • 0.779 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 14.775 mm (1)
  • 19.776 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 25.401 mm (1)
  • 31.75 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 1.0 in (1)
  • 1.25 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Reach
Reach
  • 3.19 in (1)
  • 3.86 in (1)
Reach Min to Reach Max
Reach
Reach
  • 81.025 mm (1)
  • 98.051 mm (1)
Reach Min to Reach Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (2)
  • TN2510 (2)
  • TN25M (2)
  • TN450 (2)
  • TN5515 (2)
  • TN6525 (2)
  • TN6540 (2)
  • TN7525 (2)
  • TN7535 (2)
  • TTI25 (2)
  • TTM (2)
  • TTM08 (2)
  • WK15CM (2)
  • WP35CM (2)
  • WS30PM (2)
  • WS40PM (2)
Maximum Ramp Angle
Maximum Ramp Angle
  • 23.0 (1)
  • 50.0 (1)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
backEnd
Back-End Diameter
Back-End Diameter
  • 25.401 mm (1)
  • 31.75 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.0 in (1)
  • 1.25 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
以下に示すパラメータのいずれかを使用して表示列を変更することができます。最大7列まで表示できます。
表示 1- 2 / 2 結果
列を選択
フィルタを選択
メートル
インチ
表示
メートル
インチ
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms Weight Pounds
2646611 M100D100Z02W100RD12L553 M100D100Z02W100RD12L553 W   25.4000 1.000 14.7830 .5280 25.4 1.0 140.4620 5.530 82.5500 3.250 6.0000 .2362 2 50.000 23000 Y 0.57 1.25
    定価:
    $327.88 /各
    価格::
    数量
    2646617 M100D125Z02W125RD12L615 M100D125Z02W125RD12L615 W   31.7500 1.250 19.7810 .7780 31.75 1.25 156.2100 6.150 98.2980 3.870 6.0000 .2362 2 23.000 19000 Y 0.73 1.60
      定価:
      $335.16 /各
      価格::
      数量
      定価:
      割引: %
      価格::
      配置転換 この品目はありません
      交換品 この品目は、代理店経由で入手できる場合があります
      数量

      販売包装単位

      等級

      • W
        P Steel
        S High-Temp Alloys
        H Hardened Materials
        K Cast Iron
        M Stainless Steel
        N Non-Ferrous
      product-image
      Please adjust the following properties from

      ISO製品型番

      ANSI製品型番

      to find similar products.
      複製を作成しようとしています . 続行しますか?
      削除しようとしています 続行しますか?
      の名前を何に変更しますか?
      有効な名前を入力してください
      重複の名前を入力してください
      有効な名前を入力してください
      マイソリューションページにを追加しようとしています. 続行しますか?
      有効な名前を入力してください
      次のコピーを送信

      有効なメールアドレスを入力してください
      有効な名前を入力してください

      次のCAD図面が見つかりました

      お探しのファイルを一括して選択してダウンロードできます

      ダッシュボード情報を表示するには、ログインする必要があります
      Session expired due to inactivity, please login again
      カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
      アイテムがカートに正常に追加されました
      カートを表示
      DOWNLOAD TYPE:



      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Name SAP Material Number ISO Catalog Number    
      Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.