M1200 Mini • 60° • シェルミル • メトリック
価格オプションについては、当社の営業担当にお問い合わせください。
特徴と利点
- Twelve cutting edges.
- Higher axial depth-of-cut capability with 59° lead angle.
フェイスミーリング
側面加工／ショルダー加工：緩やかな面取り
ミーリング — スルークーラント
ミーリング — 側面および正面
インサート選択の手引き
| 被削材 グループ | 軽切削加工 | 汎用 | 重切削加工 | 多種被削材用 | ||||
| ブレーカ 形状 | 材種 | ブレーカ 形状 | 材種 | ブレーカ 形状 | 材種 | ブレーカ 形状 | 材種 | |
| P1–P2 | .E..LD | WP40PM | .S..GD | WP40PM | .S..HD | WP40PM | .S..MM | WU20PM |
| P3–P4 | .E..LD | WP25PM | .S..GD | WP35CM | .S..HD | WP35CM | .S..MM | WU20PM |
| P5–P6 | .E..LD | WP25PM | .S..GD | WP35CM | .S..HD | WP35CM | .S..MM | WP35CM |
| M1–M2 | .E..LD | WP25PM | .S..GD | WP25PM | .S..HD | WP25PM | .S..MM | WU20PM |
| M3 | .E..LD | WP35CM | .S..GD | WP35CM | .S..HD | WP35CM | .S..MM | WP35CM |
| K1–K2 | .E..LD | TN6520 | .S..GD | WK15CM | .S..HD | WK15CM | .S..MM | WK15CM |
| K3 | .E..LD | WP35CM | .S..GD | WP35CM | .S..HD | WP35CM | .S..MM | WP35CM |
| N1–N2 | .F..LDJ | TN6501 | .F..LDJ | TN6501 | .F..LDJ | TN6501 | ||
| N3 | .F..LDJ | TN6501 | .F..LDJ | TN6501 | .F..LDJ | TN6501 | ||
| S1–S2 | .E..LD | WS30PM | .S..GD | WS30PM | .S..HD | WS40PM | .S..MM | WU20PM |
| S3 | .E..LD | WS30PM | .S..GD | WS30PM | .S..HD | WS40PM | .S..MM | WU20PM |
| S4 | .E..LD | WS30PM | .S..GD | WS30PM | .S..HD | WS40PM | .S..MM | WU20PM |
推奨切削速度の開始値［m/min］
| M1200 Mini • Recommended Starting Speeds [m/min] | ||||||||||||||||||||||
| 材種 | THM-U | TN6501 | TN6510 | TN6520 | TN6525 | TN6540 | WK15CM | |||||||||||||||
| 切り屑厚さ（hex）（mm） | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | ||||||||
| 被削材 グループ | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | |
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 410 | 320 | 280 | 360 | 280 | 240 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 320 | 250 | 215 | 250 | 190 | 170 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 280 | 215 | 185 | 215 | 170 | 140 | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | 235 | 170 | 145 | 180 | 130 | 110 | – | – | – | |
| 5 | – | – | – | – | – | – | – | – | – | – | – | – | 310 | 235 | 200 | 240 | 180 | 150 | – | – | – | |
| 6 | – | – | – | – | – | – | – | – | – | – | – | – | 205 | 160 | 130 | 160 | 120 | 100 | – | – | – | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 190 | 120 | 80 | 130 | 80 | 60 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 120 | 80 | 50 | 80 | 50 | 40 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 125 | 80 | 55 | 85 | 50 | 40 | – | – | – | |
| K | 1 | – | – | – | – | – | – | 480 | 350 | 260 | 450 | 320 | 230 | 275 | 245 | 220 | 220 | 205 | 180 | 505 | 460 | 410 |
| 2 | – | – | – | – | – | – | 420 | 280 | 205 | 390 | 250 | 190 | 215 | 190 | 180 | 175 | 155 | 140 | 400 | 355 | 330 | |
| 3 | – | – | – | – | – | – | 335 | 260 | 200 | 300 | 230 | 160 | 180 | 160 | 145 | 155 | 145 | 125 | 335 | 300 | 275 | |
| N | 1 | 2400 | 1440 | 1200 | 2400 | 1440 | 1200 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 1640 | 980 | 800 | 1640 | 980 | 800 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 960 | 600 | 480 | 960 | 600 | 480 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 35 | 30 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 25 | 20 | 10 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 70 | 40 | 30 | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 60 | 30 | 25 | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. | ||||||||||||||||||||||
| M1200 • Recommended Starting Speeds [m/min] | |||||||||||||||||||||||||
| 材種 | WK15PM | WP25PM | WP35CM | WP40PM | WS30PM | WS40PM | WU20PM | WK25YM | |||||||||||||||||
| 切り屑厚さ（hex）（mm） | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | |||||||||
| 被削材 グループ | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | |
| P | 1 | – | – | – | 395 | 340 | 325 | 545 | 475 | 445 | 355 | 310 | 295 | – | – | – | – | – | – | 330 | 290 | 270 | – | – | – |
| 2 | – | – | – | 330 | 290 | 240 | 335 | 305 | 275 | 300 | 260 | 215 | – | – | – | – | – | – | 275 | 250 | 200 | – | – | – | |
| 3 | – | – | – | 305 | 260 | 210 | 305 | 275 | 245 | 275 | 235 | 190 | – | – | – | – | – | – | 255 | 220 | 175 | – | – | – | |
| 4 | – | – | – | 270 | 220 | 180 | 230 | 210 | 190 | 245 | 205 | 160 | – | – | – | – | – | – | 225 | 190 | 150 | – | – | – | |
| 5 | – | – | – | 220 | 205 | 180 | 310 | 275 | 250 | 205 | 185 | 160 | – | – | – | 205 | 175 | 145 | 185 | 175 | 150 | – | – | – | |
| 6 | – | – | – | 200 | 150 | 120 | 190 | 160 | 130 | 180 | 140 | 110 | – | – | – | 180 | 130 | 95 | 165 | 130 | 100 | – | – | – | |
| M | 1 | – | – | – | 245 | 215 | 200 | 245 | 220 | 185 | 235 | 205 | 185 | 270 | 240 | 220 | 250 | 205 | 170 | 205 | 180 | 165 | – | – | – |
| 2 | – | – | – | 220 | 190 | 155 | 220 | 190 | 170 | 210 | 180 | 150 | 245 | 215 | 175 | 215 | 175 | 145 | 185 | 160 | 130 | – | – | – | |
| 3 | – | – | – | 170 | 145 | 115 | 175 | 155 | 140 | 155 | 140 | 110 | 185 | 160 | 125 | 175 | 130 | 100 | 140 | 120 | 95 | – | – | – | |
| K | 1 | 360 | 290 | 245 | 275 | 245 | 220 | 355 | 320 | 290 | – | – | – | – | – | – | – | – | – | 250 | 220 | 185 | 965 | 880 | 780 |
| 2 | 280 | 230 | 195 | 215 | 190 | 180 | 280 | 250 | 230 | – | – | – | – | – | – | – | – | – | 200 | 180 | 150 | 765 | 685 | 635 | |
| 3 | 210 | 175 | 140 | 180 | 160 | 145 | 235 | 210 | 190 | – | – | – | – | – | – | – | – | – | 180 | 150 | 120 | 645 | 570 | 525 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 550 | 470 | 400 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 550 | 470 | 400 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 400 | 350 | 300 | – | – | – | |
| S | 1 | – | – | – | 50 | 40 | 30 | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 50 | 40 | 30 | 40 | 35 | 25 | – | – | – |
| 2 | – | – | – | 50 | 40 | 30 | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 50 | 40 | 30 | 40 | 35 | 25 | – | – | – | |
| 3 | – | – | – | 60 | 50 | 30 | – | – | – | 60 | 50 | 35 | 65 | 55 | 35 | 60 | 50 | 30 | 50 | 40 | 25 | – | – | – | |
| 4 | – | – | – | 85 | 60 | 40 | 80 | 60 | 40 | 80 | 60 | 40 | 100 | 70 | 50 | 70 | 60 | 35 | 70 | 50 | 35 | – | – | – | |
| H | 1 | – | – | – | 145 | 110 | 85 | – | – | – | – | – | – | – | – | – | – | – | – | 110 | 80 | 70 | – | – | – |
| Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. | |||||||||||||||||||||||||
| M1200 • Recommended Starting Speeds [SFM] | |||||||||||||||||||||||||
| 材種 | WK15PM | WP25PM | WP35CM | WP40PM | WS30PM | WS40PM | WU20PM | WK25YM | |||||||||||||||||
| Chip Thickness hex Inch | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | |||||||||
| 被削材 グループ | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | |
| P | 1 | – | – | – | 1295 | 1120 | 1060 | 1790 | 1555 | 1460 | 970 | 855 | 805 | – | – | – | – | – | – | 1080 | 950 | 890 | – | – | – |
| 2 | – | – | – | 1080 | 940 | 785 | 1105 | 1000 | 905 | 820 | 705 | 590 | – | – | – | – | – | – | 900 | 820 | 660 | – | – | – | |
| 3 | – | – | – | 1000 | 845 | 690 | 1000 | 905 | 805 | 755 | 640 | 525 | – | – | – | – | – | – | 840 | 720 | 570 | – | – | – | |
| 4 | – | – | – | 890 | 725 | 590 | 750 | 690 | 630 | 675 | 560 | 445 | – | – | – | – | – | – | 740 | 620 | 490 | – | – | – | |
| 5 | – | – | – | 725 | 670 | 590 | 1025 | 905 | 830 | 560 | 510 | 445 | – | – | – | 560 | 475 | 395 | 610 | 570 | 490 | – | – | – | |
| 6 | – | – | – | 650 | 490 | 395 | 630 | 535 | 430 | 490 | 375 | 295 | – | – | – | 490 | 360 | 260 | 540 | 430 | 330 | – | – | – | |
| M | 1 | – | – | – | 805 | 710 | 650 | 805 | 725 | 610 | 640 | 560 | 510 | 890 | 785 | 725 | 690 | 560 | 460 | 670 | 590 | 540 | – | – | – |
| 2 | – | – | – | 725 | 630 | 510 | 725 | 630 | 550 | 575 | 490 | 410 | 805 | 710 | 570 | 590 | 475 | 395 | 610 | 520 | 430 | – | – | – | |
| 3 | – | – | – | 550 | 475 | 370 | 570 | 510 | 450 | 425 | 375 | 295 | 610 | 535 | 415 | 475 | 360 | 280 | 460 | 390 | 310 | – | – | – | |
| K | 1 | 1180 | 950 | 805 | 905 | 805 | 725 | 1165 | 1045 | 940 | – | – | – | – | – | – | – | – | – | 820 | 720 | 610 | 3170 | 2880 | 2560 |
| 2 | 920 | 755 | 640 | 710 | 630 | 590 | 925 | 830 | 750 | – | – | – | – | – | – | – | – | – | 660 | 590 | 490 | 2510 | 2240 | 2090 | |
| 3 | 690 | 575 | 460 | 590 | 535 | 475 | 770 | 690 | 630 | – | – | – | – | – | – | – | – | – | 590 | 490 | 390 | 2110 | 1870 | 1720 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1800 | 1540 | 1310 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1800 | 1540 | 1310 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1310 | 1150 | 980 | – | – | – | |
| S | 1 | – | – | – | 155 | 140 | 95 | – | – | – | – | – | – | 180 | 155 | 120 | 130 | 115 | 80 | 130 | 110 | 80 | – | – | – |
| 2 | – | – | – | 155 | 140 | 95 | – | – | – | – | – | – | 180 | 155 | 120 | 130 | 115 | 80 | 130 | 110 | 80 | – | – | – | |
| 3 | – | – | – | 200 | 155 | 95 | – | – | – | – | – | – | 215 | 180 | 120 | 165 | 130 | 80 | 160 | 130 | 80 | – | – | – | |
| 4 | – | – | – | 275 | 200 | 140 | 260 | 200 | 130 | – | – | – | 335 | 235 | 155 | 195 | 165 | 100 | 230 | 160 | 110 | – | – | – | |
| H | 1 | – | – | – | 475 | 355 | 275 | – | – | – | – | – | – | – | – | – | – | – | – | 360 | 260 | 230 | – | – | – |
| Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. | |||||||||||||||||||||||||
| M1200 Mini • Recommended Starting Speeds [SFM] | ||||||||||||||||||||||
| 材種 | THM-U | TN6501 | TN6510 | TN6520 | TN6525 | TN6540 | WK15CM | |||||||||||||||
| Chip Thickness hex Inch | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | 最小 | 最大 | ||||||||
| 被削材 グループ | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | 最大 | スタート | 最小 | |
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 1340 | 1045 | 925 | 1180 | 925 | 785 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 1045 | 830 | 710 | 830 | 630 | 550 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 925 | 710 | 610 | 710 | 550 | 450 | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | 770 | 550 | 475 | 590 | 430 | 355 | – | – | – | |
| 5 | – | – | – | – | – | – | – | – | – | – | – | – | 1025 | 770 | 650 | 785 | 590 | 490 | – | – | – | |
| 6 | – | – | – | – | – | – | – | – | – | – | – | – | 670 | 535 | 430 | 535 | 395 | 335 | – | – | – | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 630 | 395 | 260 | 430 | 260 | 200 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 395 | 260 | 155 | 260 | 155 | 140 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 415 | 260 | 180 | 275 | 155 | 140 | – | – | – | |
| K | 1 | – | – | – | – | – | – | 1570 | 1140 | 845 | 1475 | 1045 | 750 | 905 | 805 | 725 | 725 | 670 | 590 | 1655 | 1520 | 1340 |
| 2 | – | – | – | – | – | – | 1380 | 925 | 670 | 1280 | 830 | 630 | 710 | 630 | 590 | 570 | 510 | 450 | 1320 | 1165 | 1080 | |
| 3 | – | – | – | – | – | – | 1105 | 845 | 650 | 985 | 750 | 535 | 590 | 535 | 475 | 510 | 475 | 415 | 1105 | 985 | 905 | |
| N | 1 | 7870 | 4720 | 3935 | 7870 | 4720 | 3935 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 5370 | 3210 | 2615 | 5370 | 3210 | 2615 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 3150 | 1970 | 1570 | 3150 | 1970 | 1570 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 155 | 120 | 95 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 80 | 60 | 40 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 235 | 140 | 95 | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 200 | 95 | 80 | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. | ||||||||||||||||||||||
| ae/D1 = | 0,1 | 0,2 | 0,3 | 0,4 |
| fz-因数 | 2,0 | 1,5 | 1,3 | 1,0 |
| vc-因数 | 1,4 | 1,3 | 1,2 | 1,1 |
| TN5515 | TN6501 | TN6505 | TN6510 | TN6520 | ||||||||||||
| 切れ刃 形状 | 1刃あたりの送り量 fz（mm） | |||||||||||||||
| ..LDJ | – | – | – | 0,06 | 0,10 | 0,30 | – | – | – | – | – | – | – | – | – | |
| ..LD | 0,08 | 0,15 | 0,25 | – | – | – | 0,08 | 0,10 | 0,25 | 0,09 | 0,17 | 0,28 | 0,09 | 0,17 | 0,29 | |
| ..GD | 0,12 | 0,20 | 0,35 | – | – | – | – | – | – | 0,13 | 0,22 | 0,39 | 0,14 | 0,23 | 0,40 | |
| ..HD | 0,18 | 0,25 | 0,55 | – | – | – | – | – | – | 0,20 | 0,28 | 0,61 | 0,21 | 0,29 | 0,64 | |
| 被削材 グループ | vc (m/min) | |||||||||||||||
| 1 | – | – | – | – | – | – | 460 | 350 | 300 | – | – | – | – | – | – | |
| 2 | – | – | – | – | – | – | 310 | 230 | 210 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | 260 | 200 | 170 | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | 270 | 210 | 170 | – | – | – | – | – | – | |
| 5 | – | – | – | – | – | – | 220 | 170 | 140 | – | – | – | – | – | – | |
| 6 | – | – | – | – | – | – | 300 | 220 | 180 | – | – | – | – | – | – | |
| 7 | – | – | – | – | – | – | 220 | 170 | 160 | – | – | – | – | – | – | |
| 8 | – | – | – | – | – | – | 200 | 160 | 130 | – | – | – | – | – | – | |
| 9 | – | – | – | – | – | – | 170 | 130 | 100 | – | – | – | – | – | – | |
| 10 | – | – | – | – | – | – | 220 | 180 | 170 | – | – | – | – | – | – | |
| 11 | – | – | – | – | – | – | 160 | 120 | 90 | – | – | – | – | – | – | |
| 12 | – | – | – | – | – | – | 290 | 220 | 180 | – | – | – | – | – | – | |
| 13.1 | – | – | – | – | – | – | 250 | 180 | 160 | – | – | – | – | – | – | |
| 13.2 | – | – | – | – | – | – | 130 | 90 | 80 | – | – | – | – | – | – | |
| 14.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 14.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 14.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 14.4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 15 | 530 | 390 | 280 | – | – | – | – | – | – | 480 | 350 | 250 | 380 | 280 | 200 | |
| 16 | 410 | 310 | 230 | – | – | – | – | – | – | 370 | 280 | 210 | 300 | 220 | 170 | |
| 17 | 460 | 310 | 230 | – | – | – | 310 | 230 | 210 | 420 | 280 | 210 | 340 | 220 | 170 | |
| 18 | 300 | 220 | 170 | – | – | – | 260 | 200 | 170 | 270 | 200 | 150 | 220 | 160 | 120 | |
| 19 | 370 | 290 | 220 | – | – | – | – | – | – | 340 | 260 | 200 | 270 | 210 | 160 | |
| 20 | 310 | 230 | 180 | – | – | – | – | – | – | 280 | 210 | 160 | 220 | 170 | 130 | |
| 21 | – | – | – | 2000 | 1050 | 650 | – | – | – | – | – | – | – | – | – | |
| 22 | – | – | – | 980 | 550 | 450 | – | – | – | – | – | – | – | – | – | |
| 23 | – | – | – | 1800 | 950 | 600 | – | – | – | – | – | – | – | – | – | |
| 24 | – | – | – | 1050 | 650 | 500 | – | – | – | – | – | – | – | – | – | |
| 25 | – | – | – | 750 | 500 | 350 | – | – | – | – | – | – | – | – | – | |
| 26 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 27 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 28 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 29 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 30 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 31 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 32 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 33 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 34 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 36 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 37 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 38.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 38.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 39.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 39.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| ae/D1 = | 0,1 | 0,2 | 0,3 | 0,4 |
| fz-因数 | 2,0 | 1,5 | 1,3 | 1,0 |
| vc-因数 | 1,4 | 1,3 | 1,2 | 1,1 |
| TN6525 | TN6540 | TN7535 | THM-U | ||||||||||
| 切れ刃 形状 | 1刃あたりの送り量 fz（mm） | ||||||||||||
| ..LDJ | – | – | – | – | – | – | – | – | – | 0,06 | 0,10 | 0,30 | |
| ..LD | 0,08 | 0,12 | 0,25 | 0,11 | 0,17 | 0,33 | 0,10 | 0,15 | 0,30 | – | – | – | |
| ..GD | 0,10 | 0,17 | 0,29 | 0,13 | 0,22 | 0,39 | 0,12 | 0,20 | 0,35 | – | – | – | |
| ..HD | 0,15 | 0,21 | 0,50 | 0,20 | 0,28 | 0,66 | 0,18 | 0,25 | 0,60 | – | – | – | |
| 被削材 グループ | vc (m/min) | ||||||||||||
| 1 | 350 | 270 | 228 | 290 | 220 | 190 | 360 | 280 | 240 | – | – | – | |
| 2 | 240 | 180 | 160 | 200 | 150 | 130 | 250 | 190 | 165 | – | – | – | |
| 3 | 200 | 150 | 130 | 170 | 130 | 110 | 210 | 160 | 140 | – | – | – | |
| 4 | 210 | 160 | 130 | 170 | 130 | 110 | 215 | 165 | 140 | – | – | – | |
| 5 | 170 | 130 | 110 | 140 | 100 | 90 | 180 | 130 | 110 | – | – | – | |
| 6 | 228 | 170 | 140 | 190 | 140 | 120 | 240 | 180 | 150 | – | – | – | |
| 7 | 170 | 130 | 120 | 140 | 110 | 100 | 180 | 140 | 120 | – | – | – | |
| 8 | 150 | 120 | 100 | 130 | 100 | 80 | 160 | 120 | 100 | – | – | – | |
| 9 | 130 | 100 | 80 | 110 | 80 | 60 | 140 | 100 | 80 | – | – | – | |
| 10 | 170 | 140 | 130 | 140 | 120 | 100 | 180 | 145 | 130 | – | – | – | |
| 11 | 120 | 90 | 70 | 100 | 70 | 60 | 120 | 90 | 70 | – | – | – | |
| 12 | 220 | 170 | 140 | 180 | 140 | 120 | 230 | 175 | 150 | – | – | – | |
| 13.1 | 190 | 140 | 120 | 160 | 120 | 100 | 200 | 145 | 120 | – | – | – | |
| 13.2 | 96 | 70 | 60 | 80 | 60 | 50 | 100 | 75 | 60 | – | – | – | |
| 14.1 | 190 | 120 | 90 | 160 | 100 | 70 | 200 | 120 | 90 | – | – | – | |
| 14.2 | 150 | 90 | 70 | 130 | 80 | 60 | 160 | 95 | 70 | – | – | – | |
| 14.3 | 120 | 70 | 50 | 100 | 60 | 40 | 120 | 70 | 55 | – | – | – | |
| 14.4 | 100 | 60 | 40 | 80 | 50 | 40 | 100 | 60 | 45 | – | – | – | |
| 15 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 16 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 17 | 240 | 180 | 160 | 200 | 150 | 130 | 250 | 190 | 165 | – | – | – | |
| 18 | 200 | 150 | 130 | 170 | 130 | 110 | 210 | 160 | 140 | – | – | – | |
| 19 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 20 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 21 | – | – | – | – | – | – | – | – | – | 1800 | 950 | 590 | |
| 22 | – | – | – | – | – | – | – | – | – | 880 | 500 | 405 | |
| 23 | – | – | – | – | – | – | – | – | – | 1600 | 860 | 540 | |
| 24 | – | – | – | – | – | – | – | – | – | 950 | 590 | 450 | |
| 25 | – | – | – | – | – | – | – | – | – | 680 | 450 | 315 | |
| 26 | – | – | – | – | – | – | – | – | – | 670 | 500 | 310 | |
| 27 | – | – | – | – | – | – | – | – | – | 700 | 610 | 500 | |
| 28 | – | – | – | – | – | – | – | – | – | 750 | 660 | 540 | |
| 29 | – | – | – | – | – | – | – | – | – | 750 | 650 | 530 | |
| 30 | – | – | – | – | – | – | – | – | – | 700 | 655 | 500 | |
| 31 | – | – | – | 60 | 50 | 45 | – | – | – | – | – | – | |
| 32 | – | – | – | 50 | 40 | 35 | – | – | – | – | – | – | |
| 33 | – | – | – | 35 | 25 | 20 | – | – | – | – | – | – | |
| 34 | – | – | – | 30 | 20 | 15 | – | – | – | – | – | – | |
| 35 | – | – | – | 30 | 20 | 15 | – | – | – | – | – | – | |
| 36 | – | – | – | 80 | 50 | 40 | – | – | – | – | – | – | |
| 37 | – | – | – | 70 | 45 | 35 | – | – | – | – | – | – | |
| 38.1 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 38.2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 39.1 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 39.2 | – | – | – | – | – | – | – | – | – | – | – | – | |