ソリューションに戻る
ソリューション編集
ソリューション追加
ソリューション名: {{SolutionName}}
M170 • Weldon®シャンクRD12T3..• メトリック
Weldon®シャンク • RD12T3..
特徴と利点
- Premium nickel-coated bodies.
- Designed for maximum performance.
- Ideally suited for die and mold manufacturing.
使用法と用途
シャンク — ストレートWeldon 2 フラット
3Dプロファイル加工
側面加工／ショルダー加工：ボールノーズ
溝加工：スクエアエンド
フェイスミーリング
ランピング加工：ブランク
ポケット溝加工
ヘリカルミーリング
ミーリング — スルークーラント
ワーク材料
P
Steel
M
Stainless Steel
K
Cast Iron
S
High-Temp Alloys
H
Hardened Materials
フィルタと列
Filters
フィルタ
フィルタ
フィルタ表示
メートル
インチ
Workpiece Material
Workpiece Material
-
P Steel (1)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1)
-
-
M Stainless Steel (1)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1)
-
-
K Cast Iron (1)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1)
-
-
S High-Temp Alloys (1)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1)
-
-
H Hardened Materials (1)
-
H1Hardened Materials 44-48 HRC(1)
-
H2Hardened Materials 48-55 HRC(1)
-
H3Hardened Materials 56-60 HRC(1)
-
Applications
Applications
-
Face Milling (1)
-
Pocket (1)
-
Pocket Helical (1)
-
Pocket Milling (1)
-
Profile Milling (1)
-
Ramping (1)
-
Shoulder Ball Nose (1)
-
Shoulder Milling (1)
-
Slot Milling (1)
-
Slot Square End (1)
application
Grade Of Cutting Tool
Grade Of Cutting Tool
-
TN2505 (1)
-
TN6525 (1)
-
TN6540 (1)
No filters matching ""
以下に示すパラメータのいずれかを使用して表示列を変更することができます。最大7列まで表示できます。
表示
1- 1
/ 1 結果
メートル
インチ
表示
メートル
インチ
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | [D1MAX] Maximum Cutting Diameter | [D1MAX] Maximum Cutting Diameter | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [L] Overall Length | [L] Overall Length | [L2] Head Length | [L2] Head Length | [AP1MAX] 1st Maximum Cutting Depth | [AP1MAX] 1st Maximum Cutting Depth | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3930960 | M170D032Z03B32RD12 | M170D032Z03B32RD12 | 32.0000 | 1.260 | 20.0000 | .7870 | 32.0 | 1.259 | 125.0000 | 4.921 | 64.0000 | 2.520 | 6.0000 | .2360 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
定価:
$315.92
/各
価格::
数量
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
インサート選択の手引き
| Light Machining | General Purpose | Heavy Machining | ||||
| Material Group | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | MM | TN6525 | MM | TN6525 | MM | TN6540 |
| P3–P4 | MH | TN2505 | MH | TN6525 | MH | TN6540 |
| P5–P6 | MH | TN2505 | MH | TN6525 | MH | TN6540 |
| M1–M2 | – | – | MM | TN6525 | MM | TN6540 |
| M3 | – | – | MM | TN6525 | MM | TN6540 |
| K1–K2 | MH | TN2505 | MH | TN2505 | MH | TN6525 |
| K3 | MH | TN2505 | MH | TN2505 | MH | TN6525 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | MM | TN6540 | – | – |
| S3 | – | – | MM | TN6540 | – | – |
| S4 | – | – | MM | TN6540 | – | – |
| H1 | MH | TN2505 | MH | TN2505 | – | – |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 100 % | ||||||||||||
| MM | 0,33 | 0,48 | 0,76 | 0,24 | 0,35 | 0,54 | 0,18 | 0,26 | 0,41 | 0,16 | 0,23 | 0,35 | 0,14 | 0,21 | 0,33 | MM |
| MH | 0,35 | 0,70 | 1,17 | 0,25 | 0,50 | 0,84 | 0,19 | 0,38 | 0,63 | 0,16 | 0,33 | 0,55 | 0,15 | 0,30 | 0,50 | MH |
| Light Machining | General Purpose | Heavy Machining |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 100 % | ||||||||||||
| MM | 0,38 | 0,56 | 0,88 | 0,28 | 0,40 | 0,63 | 0,21 | 0,30 | 0,47 | 0,18 | 0,26 | 0,41 | 0,17 | 0,24 | 0,38 | MM |
| MH | 0,40 | 0,81 | 1,36 | 0,29 | 0,58 | 0,97 | 0,22 | 0,43 | 0,72 | 0,19 | 0,38 | 0,63 | 0,17 | 0,35 | 0,58 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 100 % | ||||||||||||
| MM | 0,60 | 0,88 | 1,38 | 0,43 | 0,63 | 0,99 | 0,32 | 0,47 | 0,74 | 0,28 | 0,41 | 0,64 | 0,26 | 0,38 | 0,59 | MM |
| MH | 0,63 | 1,28 | 2,16 | 0,45 | 0,91 | 1,53 | 0,34 | 0,68 | 1,14 | 0,30 | 0,59 | 0,99 | 0,27 | 0,54 | 0,90 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 100 % | ||||||||||||
| MM | 0,44 | 0,65 | 1,02 | 0,32 | 0,47 | 0,73 | 0,24 | 0,35 | 0,55 | 0,21 | 0,30 | 0,48 | 0,19 | 0,28 | 0,44 | MM |
| MH | 0,47 | 0,94 | 1,59 | 0,34 | 0,68 | 1,13 | 0,25 | 0,50 | 0,84 | 0,22 | 0,44 | 0,73 | 0,20 | 0,40 | 0,67 | MH |
推奨切削速度の開始値［m/min］
| Material Group | TN2505 | TN6525 | TN6540 | |||||||
| P | 1 | 550 | 420 | 360 | 410 | 320 | 280 | 360 | 280 | 240 |
| 2 | 320 | 240 | 205 | 320 | 250 | 215 | 250 | 190 | 170 | |
| 3 | 320 | 240 | 205 | 280 | 215 | 185 | 215 | 170 | 140 | |
| 4 | – | – | – | 235 | 170 | 145 | 180 | 130 | 110 | |
| 5 | – | – | – | 310 | 235 | 200 | 240 | 180 | 150 | |
| 6 | – | – | – | 205 | 160 | 130 | 160 | 120 | 100 | |
| M | 1 | – | – | – | 190 | 120 | 80 | 130 | 80 | 60 |
| 2 | – | – | – | 120 | 80 | 50 | 80 | 50 | 40 | |
| 3 | – | – | – | 125 | 80 | 55 | 85 | 50 | 40 | |
| K | 1 | 400 | 300 | 250 | 275 | 245 | 220 | 220 | 205 | 180 |
| 2 | 540 | 365 | 280 | 215 | 190 | 180 | 175 | 155 | 140 | |
| 3 | 310 | 190 | 155 | 180 | 160 | 145 | 155 | 145 | 125 | |
| N | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 50 | 35 | 30 |
| 2 | – | – | – | – | – | – | 25 | 20 | 10 | |
| 3 | – | – | – | – | – | – | 70 | 40 | 30 | |
| 4 | – | – | – | – | – | – | 60 | 30 | 25 | |
| H | 1 | 175 | 140 | 95 | – | – | – | – | – | – |
| 2 | 175 | 140 | 95 | – | – | – | – | – | – | |
| 3 | 140 | 115 | 80 | – | – | – | – | – | – | |