RNGJ-MM
3/4″ • Inserts • RNGJ64…
特徴と利点
- -MM geometry is for general purpose, especially for steel.
フィルタと列
Filters
フィルタ
フィルタ表示
メートル
インチ
Workpiece Material
Workpiece Material
-
P Steel (4)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (4)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (4)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (4)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (4)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (4)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (4)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (4)
-
-
M Stainless Steel (4)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (4)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (4)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (4)
-
-
K Cast Iron (3)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (3)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (3)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (3)
-
-
S High-Temp Alloys (4)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (3)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (3)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (3)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (4)
-
-
H Hardened Materials (1)
-
H1Hardened Materials 44-48 HRC (1)
-
application
Grade Of Cutting Tool
Grade Of Cutting Tool
-
WK15CM (1)
-
WP25PM (1)
-
WP35CM (1)
-
WP40PM (1)
-
WU35PM (1)
No filters matching ""
以下に示すパラメータのいずれかを使用して表示列を変更することができます。最大7列まで表示できます。
表示
1-
5
/
5 結果
メートル
インチ
表示
メートル
インチ
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | Average Chip Thickness [HM] | Average Chip Thickness [HM] | Insert Number of Indexes | [S] Insert Thickness | [S] Insert Thickness | [D] Insert IC Size | [D] Insert IC Size | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6010902 | RNGJ190600SMM | RNGJ64SMM | WP35CM | 0.088 | .0035 | 12 | 6.358 | .25 | 19.05 | .75 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
定価:
$25.98
/各
価格::
数量
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6010883 | RNGJ190600SMM | RNGJ64SMM | WU35PM | 0.088 | .0035 | 12 | 6.358 | .25 | 19.05 | .75 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
定価:
$25.98
/各
価格::
数量
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6010882 | RNGJ190600SMM | RNGJ64SMM | WP25PM | 0.088 | .0035 | 12 | 6.358 | .25 | 19.05 | .75 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
定価:
$25.98
/各
価格::
数量
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6010885 | RNGJ190600SMM | RNGJ64SMM | WK15CM | 0.088 | .0035 | 12 | 6.358 | .25 | 19.05 | .75 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
定価:
$27.02
/各
価格::
数量
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6010884 | RNGJ190600SMM | RNGJ64SMM | WP40PM | 0.088 | .0035 | 12 | 6.358 | .25 | 19.05 | .75 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
定価:
$27.02
/各
価格::
数量
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Insert Selection Guide • M200™ Series • Large IC Expansion
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .E..ML | WP25PM | .S..MM | WP40PM | .S..MM | WP40PM |
| P3–P4 | .E..ML | WP25PM | .S..MM | WP40PM | .S..MM | WP40PM |
| P5–P6 | .E..ML | WP25PM | .S..MM | WP35CM | .S..MM | WP35CM |
| M1–M2 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| M3 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| K1–K2 | – | – | .S..MM | WK15CM | – | – |
| K3 | – | – | .S..MM | WK15CM | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| S3 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| S4 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| H1 | – | – | .S..MM | WP25PM | – | – |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .003 | .009 | .016 | .003 | .007 | .012 | .002 | .006 | .010 | .002 | .006 | .010 | .002 | .005 | .009 | .E..ML |
| .S..MM | .007 | .015 | .027 | .005 | .011 | .020 | .005 | .010 | .017 | .004 | .009 | .016 | .004 | .009 | .016 | .S..MM |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .004 | .011 | .020 | .003 | .008 | .015 | .003 | .007 | .013 | .003 | .007 | .012 | .003 | .007 | .012 | .E..ML |
| .S..MM | .009 | .019 | .034 | .006 | .014 | .025 | .006 | .012 | .021 | .005 | .011 | .020 | .005 | .011 | .020 | .S..MM |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .008 | .021 | .037 | .006 | .016 | .027 | .005 | .014 | .023 | .005 | .013 | .022 | .005 | .012 | .021 | .E..ML |
| .S..MM | .016 | .035 | .065 | .012 | .025 | .046 | .010 | .022 | .040 | .010 | .020 | .037 | .009 | .020 | .036 | .S..MM |
| Light
|
General
|
Heavy
|
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .006 | .015 | .027 | .004 | .011 | .020 | .004 | .010 | .017 | .004 | .009 | .016 | .003 | .009 | .016 | .E..ML |
| .S..MM | .012 | .025 | .046 | .009 | .018 | .033 | .007 | .016 | .029 | .007 | .015 | .027 | .007 | .015 | .026 | .S..MM |
Recommended Starting Speeds [SFM]
| Material Group | WK15CM | WP25PM | WU35PM | WP35CM | WP40PM | |||||||||||
| P | 1 | – | – | – | 1295 | 1120 | 1060 | 1025 | 905 | 845 | 1790 | 1555 | 1460 | 1165 | 1025 | 965 |
| 2 | – | – | – | 1080 | 940 | 785 | 865 | 750 | 630 | 1105 | 1000 | 905 | 985 | 845 | 710 | |
| 3 | – | – | – | 1000 | 845 | 690 | 785 | 670 | 550 | 1000 | 905 | 805 | 905 | 770 | 630 | |
| 4 | – | – | – | 890 | 725 | 590 | 710 | 590 | 475 | 750 | 690 | 630 | 805 | 670 | 535 | |
| 5 | – | – | – | 725 | 670 | 590 | 590 | 535 | 475 | 1025 | 905 | 830 | 670 | 610 | 535 | |
| 6 | – | – | – | 650 | 490 | 395 | 510 | 395 | 310 | 630 | 535 | 430 | 590 | 450 | 355 | |
| M | 1 | – | – | – | 805 | 710 | 650 | 670 | 590 | 535 | 805 | 725 | 610 | 770 | 670 | 610 |
| 2 | – | – | – | 725 | 630 | 510 | 610 | 510 | 430 | 725 | 630 | 550 | 690 | 590 | 490 | |
| 3 | – | – | – | 550 | 475 | 370 | 450 | 395 | 310 | 570 | 510 | 450 | 510 | 450 | 355 | |
| K | 1 | 1655 | 1520 | 1340 | 905 | 805 | 725 | – | – | – | 1165 | 1045 | 940 | – | – | – |
| 2 | 1320 | 1165 | 1080 | 710 | 630 | 590 | – | – | – | 925 | 830 | 750 | – | – | – | |
| 3 | 1105 | 985 | 905 | 590 | 535 | 475 | – | – | – | 770 | 690 | 630 | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 155 | 140 | 95 | 140 | 120 | 95 | – | – | – | 155 | 140 | 120 |
| 2 | – | – | – | 155 | 140 | 95 | 140 | 120 | 95 | – | – | – | 155 | 140 | 120 | |
| 3 | – | – | – | 200 | 155 | 95 | 180 | 140 | 95 | – | – | – | 200 | 155 | 120 | |
| 4 | – | – | – | 275 | 200 | 140 | 235 | 180 | 120 | 260 | 200 | 130 | 260 | 200 | 140 | |
| H | 1 | – | – | – | 475 | 355 | 275 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |