M690シリーズ

フィルタを選択
フィルタ
    フィルタ表示
    メートル
    インチ
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (53)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(50)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(53)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(53)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(53)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(53)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(53)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(53)
    • M Stainless Steel (53)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(53)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(53)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(53)
    • K Cast Iron (60)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(60)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(59)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(59)
    • N Non-Ferrous Materials (19)
      • N1
        Wrought Aluminum (19)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(19)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(19)
    • S High-Temp Alloys (50)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(41)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(41)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(41)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(50)
    • H Hardened Materials (17)
      • H1
        Hardened Materials 44-48 HRC(17)
    Select All Star
    • DE (2)
    • IN (21)
    • US (12)
    Applications
    Applications
    • Face MillingFace Milling (22)
    • Shoulder MillingShoulder Milling (22)
    • Shoulder Square EndShoulder Square End (22)
    • Slot MillingSlot Milling (22)
    • Slot Square EndSlot Square End (22)
    Cutting Diameter
    Cutting Diameter
    • 1.5 in(1)
    • 1.969 in(3)
    • 2.0 in(1)
    • 2.48 in(3)
    • 2.5 in(1)
    • 3.0 in(2)
    • 3.15 in(3)
    • 3.938 in(3)
    • 4.0 in(1)
    • 4.921 in(3)
    • 6.299 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 38.1 mm(1)
    • 50.0 mm(3)
    • 50.801 mm(1)
    • 63.0 mm(3)
    • 63.5 mm(1)
    • 76.2 mm(2)
    • 80.0 mm(3)
    • 100.0 mm(3)
    • 101.601 mm(1)
    • 125.0 mm(3)
    • 160.0 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Length
    Cutting Length
    • 10.0 mm(11)
    • 10.15 mm(4)
    • 12.0 mm(5)
    • 12.701 mm(2)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.394 in(11)
    • 0.4 in(4)
    • 0.473 in(5)
    • 0.5 in(2)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 1.5 in(1)
    • 1.575 in(6)
    • 1.72 in(1)
    • 1.75 in(1)
    • 1.969 in(6)
    • 2.0 in(3)
    • 2.48 in(4)
    Reach MintoReach Max
    Reach
    Reach
    • 38.1 mm(1)
    • 40.0 mm(6)
    • 43.7 mm(1)
    • 44.45 mm(1)
    • 50.0 mm(6)
    • 50.801 mm(3)
    • 63.0 mm(4)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (22)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (11)
    • B-Cutter Retention Screw (9)
    • SHCS or RetScrw Or BoltCircle (1)
    • Weldon (1)
    Number of Flutes
    Number of Flutes
    • 10 (1)
    • 12 (2)
    • 3 (1)
    • 4 (2)
    • 5 (4)
    • 6 (6)
    • 8 (4)
    • 9 (2)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.5 in(1)
    • 1.575 in(6)
    • 1.75 in(1)
    • 1.969 in(6)
    • 2.0 in(3)
    • 2.48 in(4)
    • 4.0 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.1 mm(1)
    • 40.0 mm(6)
    • 44.45 mm(1)
    • 50.0 mm(6)
    • 50.801 mm(3)
    • 63.0 mm(4)
    • 101.601 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.031 in(24)
    • 0.047 in(47)
    • 0.063 in(27)
    • 0.095 in(17)
    • 0.126 in(17)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.8 mm(24)
    • 1.201 mm(47)
    • 1.6 mm(27)
    • 2.401 mm(17)
    • 3.2 mm(17)
    Corner Radius MintoCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (22)
    • THM-U (16)
    • TN2510 (22)
    • TN25M (15)
    • TN450 (22)
    • TN5515 (22)
    • TN6510 (15)
    • TN6520 (18)
    • TN6525 (18)
    • TN6540 (36)
    • TN7525 (22)
    • TN7535 (22)
    • TTI25 (22)
    • TTM (22)
    • TTM08 (22)
    • WK15CM (30)
    • WP35CM (31)
    • WS30PM (17)
    • WS40PM (18)
    • WU35PM (15)
    Hand Of Tool
    Hand Of Tool
    • R (22)
    Rough Finish
    Rough Finish
    • R (1)
    Wiper Insert
    Wiper Insert
    • N (43)
    frontEnd
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • S-SQUARE 90 (43)
    Insert IC Size
    Insert IC Size
    • 12.701 mm(33)
    • 15.875 mm(10)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.5 in(33)
    • 0.625 in(10)
    Insert IC Size MintoInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 12.701 mm(32)
    • 12.8 mm(1)
    • 15.875 mm(10)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.5 in(32)
    • 0.504 in(1)
    • 0.625 in(10)
    Cutting Edge Length MintoCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • ALP (1)
    • MH (20)
    • ML (6)
    • MM (16)
    Cutting Tool Material
    Cutting Tool Material
    • H W (43)
    Tolerance Class
    Tolerance Class
    • E (1)
    • M (42)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (1)
    • SHELL MILL (21)
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(1)
    • 22.0 mm(6)
    • 25.401 mm(3)
    • 27.0 mm(3)
    • 31.75 mm(1)
    • 32.0 mm(3)
    • 38.1 mm(1)
    • 40.0 mm(4)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(1)
    • 0.866 in(6)
    • 1.0 in(3)
    • 1.063 in(3)
    • 1.25 in(1)
    • 1.26 in(3)
    • 1.5 in(1)
    • 1.575 in(4)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    マイソリューションページにを追加しようとしています. 続行しますか?
    Select the destination where you want to move to.
    新規 Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO製品型番

    ANSI製品型番

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    ダッシュボード情報を表示するには、ログインする必要があります
    Session expired due to inactivity, please login again
    カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
    アイテムがカートに正常に追加されました
    カートを表示

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO製品型番材種  

    You are about to leave the Solution building process.

    Are you sure you want to leave?