Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

VSM11 Series

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (154)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (138)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (154)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (154)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (154)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (154)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (154)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (154)
  • M Stainless Steel (154)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (154)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (154)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (154)
  • K Cast Iron (136)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (136)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (128)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (128)
  • N Non-Ferrous Materials (124)
    • N1
      Wrought Aluminum
      (124)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (124)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (116)
  • S High-Temp Alloys (154)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (142)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (142)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (142)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (154)
  • H Hardened Materials (105)
    • H1
      Hardened Materials 44-48 HRC
      (105)
Select First Choice
  • CN (56)
  • DE (111)
  • IN (19)
  • US (45)
Applications
  • Chamfer Milling Chamfer Milling (77)
  • Drilling Drilling (77)
  • Face Milling Face Milling (78)
  • Flat Bottom Drilling Flat Bottom Drilling (72)
  • ID Thread Turning ID Thread Turning (96)
  • Pipe Thread Pipe Thread (77)
  • Pocket Pocket (77)
  • Pocket Helical Pocket Helical (77)
  • Pocket Milling Pocket Milling (77)
  • Pocket Plunge Milling Pocket Plunge Milling (77)
  • Profile Milling Profile Milling (77)
  • Ramping Ramping (77)
  • Shoulder Ball Nose Shoulder Ball Nose (77)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (77)
  • Shoulder Milling Shoulder Milling (78)
  • Shoulder Roughing Shoulder Roughing (77)
  • Shoulder Square End Shoulder Square End (77)
  • Slot Ball Nose Slot Ball Nose (77)
  • Slot Milling Slot Milling (78)
  • Slot Side Slot Side (77)
  • Slot Square End Slot Square End (77)
  • Slot T Slot T (77)
  • Thread Milling Thread Milling (77)
  • Threading Threading (77)
Cutting Diameter
  • 12.0 (2)
  • 12.7 (1)
  • 15.88 (2)
  • 16.0 (6)
  • 18.0 (3)
  • 19.05 (7)
  • 20.0 (8)
  • 22.0 (3)
  • 25.0 (8)
  • 25.4 (10)
  • 30.0 (1)
  • 31.75 (5)
  • 32.0 (9)
  • 38.1 (4)
  • 40.0 (3)
  • 50.0 (2)
  • 50.8 (4)
  • 63.0 (2)
  • 63.5 (2)
  • 76.2 (1)
  • 80.0 (1)
  • 100.0 (1)
  • 101.6 (1)
  • 125.0 (1)
  • 152.4 (1)
to
Cutting Diameter
  • 0.47 (2)
  • 0.5 (1)
  • 0.62 (5)
  • 0.625 (2)
  • 0.63 (1)
  • 0.7 (3)
  • 0.75 (7)
  • 0.78 (8)
  • 0.86 (3)
  • 0.98 (8)
  • 1.0 (10)
  • 1.18 (1)
  • 1.25 (14)
  • 1.5 (4)
  • 1.57 (1)
  • 1.575 (2)
  • 1.969 (2)
  • 2.0 (4)
  • 2.48 (2)
  • 2.5 (2)
  • 3.0 (1)
  • 3.15 (1)
  • 3.937 (1)
  • 4.0 (1)
  • 4.921 (1)
  • 6.0 (1)
to
Cutting Length
  • 0.446 (14)
  • 0.448 (3)
  • 0.449 (3)
  • 0.4506 (2)
  • 0.451 (13)
  • 0.453 (16)
  • 0.4534 (1)
  • 0.4539 (1)
  • 0.454 (10)
  • 0.4549 (1)
  • 0.455 (14)
  • 0.456 (3)
  • 0.461 (3)
  • 1.654 (1)
  • 1.7 (1)
  • 2.032 (2)
to
Cutting Length
  • 11.32 (14)
  • 11.38 (3)
  • 11.4 (3)
  • 11.44 (12)
  • 11.444 (2)
  • 11.46 (1)
  • 11.516 (1)
  • 11.52 (16)
  • 11.528 (1)
  • 11.53 (10)
  • 11.55 (14)
  • 11.554 (1)
  • 11.57 (3)
  • 11.71 (3)
  • 42.02 (1)
  • 43.1 (1)
  • 51.62 (2)
to
Reach
  • 20.32 (1)
  • 21.0 (4)
  • 21.44 (1)
  • 25.0 (4)
  • 25.4 (1)
  • 27.94 (3)
  • 28.0 (1)
  • 29.72 (2)
  • 30.0 (5)
  • 30.99 (3)
  • 31.0 (10)
  • 31.75 (3)
  • 32.0 (1)
  • 32.55 (1)
  • 33.0 (2)
  • 38.1 (2)
  • 39.0 (3)
  • 40.0 (3)
  • 40.64 (1)
  • 40.89 (2)
  • 41.0 (5)
  • 43.69 (2)
  • 50.0 (2)
  • 53.34 (2)
  • 57.14 (1)
  • 63.75 (1)
  • 65.0 (1)
to
Reach
  • 0.8 (1)
  • 0.827 (3)
  • 0.8386 (1)
  • 0.844 (1)
  • 0.984 (4)
  • 1.0 (1)
  • 1.1 (3)
  • 1.102 (1)
  • 1.17 (2)
  • 1.181 (4)
  • 1.1811 (1)
  • 1.22 (11)
  • 1.2205 (1)
  • 1.221 (1)
  • 1.25 (3)
  • 1.26 (1)
  • 1.282 (1)
  • 1.299 (2)
  • 1.5 (2)
  • 1.535 (2)
  • 1.5354 (1)
  • 1.5748 (1)
  • 1.575 (2)
  • 1.6 (1)
  • 1.61 (2)
  • 1.614 (5)
  • 1.72 (2)
  • 1.969 (2)
  • 2.1 (2)
  • 2.25 (1)
  • 2.51 (1)
  • 2.559 (1)
to
Tool Cutting Edge Angle
  • 90.0 (88)
to
Connection Style
  • A-Socket Head Cap Screw (21)
  • Screw-On Connection (9)
  • Straight-Cylindrical (33)
  • Weldon (25)
Cutting Edges Per Insert
  • 0.0 (7)
  • 1.0 (90)
  • 2.0 (177)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.0 (7)
  • 0.2 (90)
  • 0.39 (94)
  • 0.4 (96)
  • 0.78 (96)
  • 0.79 (93)
  • 0.8 (100)
  • 1.2 (102)
  • 1.59 (92)
  • 1.6 (99)
  • 2.0 (94)
  • 2.4 (94)
  • 3.1 (94)
  • 3.2 (91)
to
Corner Radius
  • 0.0 (7)
  • 0.008 (90)
  • 0.015 (94)
  • 0.016 (96)
  • 0.031 (112)
  • 0.0313 (89)
  • 0.047 (102)
  • 0.062 (97)
  • 0.0625 (89)
  • 0.063 (93)
  • 0.078 (94)
  • 0.094 (91)
  • 0.095 (91)
  • 0.122 (94)
  • 0.125 (91)
to
application
Grade Of Cutting Tool
  • WDN10U (90)
  • WK15CM (98)
  • WK15PM (92)
  • WN10HM (96)
  • WN25PM (96)
  • WP25PM (100)
  • WP35CM (100)
  • WP40PM (101)
  • WS30PM (91)
  • WS40PM (104)
  • WU20PM (90)
  • WU35PM (96)
Hand Of Tool
  • R (88)
Wiper Insert
  • N (91)
Maximum Ramp Angle
  • 0.7 (1)
  • 0.9 (3)
  • 1.1 (1)
  • 1.2 (1)
  • 1.5 (4)
  • 1.8 (2)
  • 1.9 (5)
  • 2.5 (1)
  • 2.6 (3)
  • 2.8 (2)
  • 3.2 (1)
  • 3.6 (13)
  • 3.7 (2)
  • 4.2 (1)
  • 4.4 (1)
  • 5.1 (9)
  • 5.3 (8)
  • 6.6 (1)
  • 7.8 (8)
  • 8.6 (7)
  • 9.7 (1)
  • 10.0 (5)
  • 12.5 (2)
to
frontEnd
Insert Shape
  • X-PARALLELOGRAM 75 (186)
Center Cutting
insertGeometry
Shape
  • X-PARALLELOGRAM 75 (98)
Cutting Edge Length
  • 0.45 (3)
  • 0.452 (6)
  • 0.46 (3)
  • 0.461 (2)
  • 0.462 (56)
  • 0.463 (19)
to
Cutting Edge Length
  • 11.44 (3)
  • 11.47 (6)
  • 11.68 (3)
  • 11.72 (9)
  • 11.73 (29)
  • 11.74 (14)
  • 11.75 (21)
  • 11.76 (4)
to
Cutting Tool Material
  • D P (2)
  • H W (96)
Chip Breaker CBMD
  • ALP (16)
  • MH (13)
  • ML (20)
  • MM (38)
  • MU (2)
Tolerance Class
  • C (38)
  • P (53)
backEnd
Connection Type
  • CYLINDRICAL (58)
  • SCREW-ON (9)
  • SHELL MILL (21)
Back-End Diameter
  • 0.47 (1)
  • 0.4724 (1)
  • 0.512 (1)
  • 0.625 (3)
  • 0.6299 (1)
  • 0.63 (10)
  • 0.71 (2)
  • 0.75 (15)
  • 0.7874 (1)
  • 0.79 (9)
  • 0.827 (2)
  • 0.87 (4)
  • 0.98 (8)
  • 0.9843 (2)
  • 1.0 (10)
  • 1.06 (1)
  • 1.14 (1)
  • 1.142 (3)
  • 1.25 (4)
  • 1.26 (6)
  • 1.5 (2)
  • 1.58 (1)
to
Back-End Diameter
  • 12.0 (2)
  • 13.0 (1)
  • 15.87 (3)
  • 16.0 (11)
  • 18.0 (2)
  • 19.0 (7)
  • 19.04 (1)
  • 19.05 (6)
  • 19.06 (1)
  • 20.0 (10)
  • 21.0 (2)
  • 22.0 (4)
  • 25.0 (10)
  • 25.39 (1)
  • 25.4 (8)
  • 25.41 (1)
  • 27.0 (1)
  • 29.0 (4)
  • 31.7 (4)
  • 32.0 (6)
  • 38.1 (2)
  • 40.0 (1)
to
other
Grade
  • WDN10U (2)
  • WK15CM (10)
  • WK15PM (4)
  • WN10HM (8)
  • WN25PM (8)
  • WP25PM (12)
  • WP35CM (12)
  • WP40PM (13)
  • WS30PM (3)
  • WS40PM (16)
  • WU20PM (2)
  • WU35PM (8)
Platform
  • VSM11 (176)
Tool Unit
  • I (136)
  • M (148)
Over All Length [L]
  • 40.0 (12)
  • 42.7 (1)
  • 44.45 (1)
  • 47.94 (1)
  • 48.0 (1)
  • 50.0 (2)
  • 50.8 (2)
  • 53.75 (1)
  • 54.0 (1)
  • 62.6 (2)
  • 63.0 (1)
  • 63.51 (1)
  • 64.5 (2)
  • 67.0 (1)
  • 69.85 (1)
  • 70.0 (3)
  • 76.2 (2)
  • 79.0 (1)
  • 81.0 (3)
  • 81.28 (2)
  • 82.0 (1)
  • 82.55 (1)
  • 88.0 (3)
  • 88.9 (2)
  • 96.0 (2)
  • 100.0 (6)
  • 101.6 (4)
  • 110.0 (3)
  • 114.3 (2)
  • 115.06 (1)
  • 120.0 (2)
  • 121.92 (3)
  • 130.0 (3)
  • 132.08 (1)
  • 170.0 (5)
  • 170.18 (2)
  • 203.2 (2)
  • 210.0 (2)
  • 248.92 (1)
  • 250.0 (1)
to
Over All Length [L]
  • 1.575 (12)
  • 1.681 (1)
  • 1.75 (1)
  • 1.887 (1)
  • 1.89 (1)
  • 1.969 (2)
  • 2.0 (2)
  • 2.116 (1)
  • 2.126 (1)
  • 2.465 (2)
  • 2.48 (1)
  • 2.5 (1)
  • 2.539 (2)
  • 2.6378 (1)
  • 2.75 (1)
  • 2.756 (3)
  • 3.0 (2)
  • 3.1102 (1)
  • 3.189 (3)
  • 3.2 (2)
  • 3.2283 (1)
  • 3.25 (1)
  • 3.397 (2)
  • 3.465 (3)
  • 3.5 (2)
  • 3.7795 (2)
  • 3.937 (4)
  • 4.0 (4)
  • 4.331 (3)
  • 4.5 (2)
  • 4.53 (1)
  • 4.724 (2)
  • 4.8 (3)
  • 5.118 (3)
  • 5.2 (1)
  • 6.693 (5)
  • 6.7 (2)
  • 8.0 (2)
  • 8.268 (2)
  • 9.8 (1)
  • 9.843 (1)
to
Head Length [L2]
  • 20.32 (1)
  • 21.0 (4)
  • 21.44 (1)
  • 25.0 (4)
  • 25.4 (1)
  • 27.94 (3)
  • 28.0 (1)
  • 29.72 (2)
  • 30.0 (5)
  • 30.99 (3)
  • 31.0 (10)
  • 31.75 (3)
  • 32.0 (1)
  • 32.55 (1)
  • 33.0 (2)
  • 38.1 (2)
  • 39.0 (3)
  • 40.0 (3)
  • 40.64 (1)
  • 40.89 (2)
  • 41.0 (5)
  • 43.69 (2)
  • 50.0 (2)
  • 53.34 (2)
  • 57.14 (1)
  • 63.75 (1)
  • 65.0 (1)
to
Head Length [L2]
  • 0.8 (1)
  • 0.827 (3)
  • 0.8386 (1)
  • 0.844 (1)
  • 0.984 (4)
  • 1.0 (1)
  • 1.1 (3)
  • 1.102 (1)
  • 1.17 (2)
  • 1.181 (4)
  • 1.1811 (1)
  • 1.22 (11)
  • 1.2205 (1)
  • 1.221 (1)
  • 1.25 (3)
  • 1.26 (1)
  • 1.282 (1)
  • 1.299 (2)
  • 1.5 (2)
  • 1.535 (2)
  • 1.5354 (1)
  • 1.5748 (1)
  • 1.575 (2)
  • 1.6 (1)
  • 1.61 (2)
  • 1.614 (5)
  • 1.72 (2)
  • 1.969 (2)
  • 2.1 (2)
  • 2.25 (1)
  • 2.51 (1)
  • 2.559 (1)
to
Insert Hand
  • R (91)
Category Path
Number of Inserts
  • 1.0 (3)
  • 2.0 (17)
  • 3.0 (25)
  • 4.0 (16)
  • 5.0 (7)
  • 6.0 (6)
  • 7.0 (1)
  • 8.0 (5)
  • 9.0 (4)
  • 11.0 (1)
  • 20.0 (2)
  • 30.0 (1)
to
No filters matching ""
Narrow by category:
View Products in
Metric
Inch
0°／90°ショルダーミル • VSM11™

ストレートシャンクエンドミル（レギュラータイプおよびロングタイプ） • メトリック
(20 Products)
  • フェイスミーリングフェイスミーリング
  • ヘリカルミーリングヘリカルミーリング
  • ランピング加工：ブランクランピング加工：ブランク
  • 溝加工：スクエアエンド溝加工：スクエアエンド
  • 側面加工／ショルダー加工：スクエアエンド側面加工／ショルダー加工：スクエアエンド
  • ポケット溝加工ポケット溝加工
  • ミーリング — スルークーラントミーリング — スルークーラント
  • シャンク — ストレート プレーンシャンク — ストレート プレーン
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
5416632 VSM11D012Z01A16XD11L100 VSM11D012Z01A16XD11L100   12.0000 .4700 16.0 .63 100.0000 3.397 25.0000 .9840 11.7100 .4610 1 3.700 53100 Y 0.13
    List price:
    $218.66 /each.
    Your price::
    5416633 VSM11D016Z02A16XD11L100 VSM11D016Z02A16XD11L100   16.0000 .6200 16.0 .63 100.0000 3.397 31.0000 1.221 11.5300 .4540 2 10.000 41400 Y 0.12
      List price:
      $229.34 /each.
      Your price::
      5416700 VSM11D016Z02A16XD11L170 VSM11D016Z02A16XD11L170   16.0000 .6300 16.0 .63 170.0000 6.693 25.0000 .9840 11.5300 .4540 2 10.000 41400 Y 0.23
        List price:
        $240.00 /each.
        Your price::
        5416701 VSM11D018Z02A16XD11L170 VSM11D018Z02A16XD11L170   18.0000 .7000 16.0 .63 170.0000 6.693 25.0000 .9840 11.5700 .4560 2 9.700 37900 Y 0.23
          List price:
          $250.67 /each.
          Your price::
          5416634 VSM11D020Z02A20XD11L110 VSM11D020Z02A20XD11L110   20.0000 .7800 20.0 .79 110.0000 4.331 31.0000 1.220 11.5500 .4550 2 7.800 35100 Y 0.22
            List price:
            $240.00 /each.
            Your price::
            5416702 VSM11D020Z02A20XD11L170 VSM11D020Z02A20XD11L170   20.0000 .7800 20.0 .79 170.0000 6.693 41.0000 1.614 11.5500 .4550 2 7.800 35100 Y 0.35
              List price:
              $250.67 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              0°／90°ショルダーミル • VSM11™

              Weldon®エンドミル • メトリック
              (16 Products)
              • フェイスミーリングフェイスミーリング
              • ヘリカルミーリングヘリカルミーリング
              • ランピング加工：ブランクランピング加工：ブランク
              • 溝加工：スクエアエンド溝加工：スクエアエンド
              • 側面加工／ショルダー加工：スクエアエンド側面加工／ショルダー加工：スクエアエンド
              • ポケット溝加工ポケット溝加工
              • ミーリング — スルークーラントミーリング — スルークーラント
              • シャンク — ストレートWeldonシャンク — ストレートWeldon
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
              5416454 VSM11D012Z01B16XD11 VSM11D012Z01B16XD11   12.0000 .4700 16.0 .63 70.0000 2.756 21.0000 .8270 11.7100 .4610 1 3.700 53100 Y 0.08
                List price:
                $218.66 /each.
                Your price::
                5416455 VSM11D016Z02B16XD11 VSM11D016Z02B16XD11   16.0000 .6200 16.0 .63 70.0000 2.756 21.0000 .8270 11.5300 .4540 2 10.000 41400 Y 0.09
                  List price:
                  $229.34 /each.
                  Your price::
                  5416457 VSM11D020Z02B20XD11 VSM11D020Z02B20XD11   20.0000 .7800 20.0 .79 81.0000 3.189 30.0000 1.181 11.5500 .4550 2 7.800 35100 Y 0.15
                    List price:
                    $240.00 /each.
                    Your price::
                    5416458 VSM11D020Z03B20XD11 VSM11D020Z03B20XD11   20.0000 .7800 20.0 .79 81.0000 3.189 30.0000 1.181 11.5500 .4550 3 7.800 35100 Y 0.16
                      List price:
                      $245.33 /each.
                      Your price::
                      5416459 VSM11D025Z03B25XD11 VSM11D025Z03B25XD11   25.0000 .9800 25.0 .98 88.0000 3.465 31.0000 1.220 11.5200 .4530 3 5.300 30200 Y 0.27