通知

すべて既読にする

VSM490-10 Series

フィルタを選択
Filters
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (114)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (106)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (114)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (114)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (114)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (114)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (114)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (114)
  • M Stainless Steel (114)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (114)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (114)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (114)
  • K Cast Iron (109)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (109)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (109)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (109)
  • N Non-Ferrous Materials (101)
    • N1
      Wrought Aluminum
      (101)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (101)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (101)
  • S High-Temp Alloys (114)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (112)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (112)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (112)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (114)
  • H Hardened Materials (102)
    • H1
      Hardened Materials 44-48 HRC
      (102)
Select All Star
  • CN (27)
  • DE (73)
  • GB (16)
  • SG (24)
  • US (15)
Applications
Applications
  • Face Milling Face Milling (20)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (20)
  • Shoulder Milling Shoulder Milling (20)
  • Shoulder Roughing Shoulder Roughing (20)
  • Shoulder Square End Shoulder Square End (20)
Cutting Diameter
Cutting Diameter
  • 0.625 in (3)
  • 0.63 in (4)
  • 0.709 in (1)
  • 0.75 in (5)
  • 0.787 in (6)
  • 0.866 in (1)
  • 0.984 in (8)
  • 1.0 in (7)
  • 1.102 in (1)
  • 1.25 in (9)
  • 1.26 in (8)
  • 1.5 in (5)
  • 1.575 in (3)
  • 1.969 in (3)
  • 2.0 in (3)
  • 2.48 in (3)
  • 2.5 in (3)
  • 3.0 in (3)
  • 3.15 in (5)
  • 3.938 in (3)
  • 4.0 in (2)
  • 4.921 in (3)
  • 5.0 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.875 mm (3)
  • 16.0 mm (4)
  • 18.0 mm (1)
  • 19.05 mm (5)
  • 20.0 mm (6)
  • 22.0 mm (1)
  • 25.0 mm (8)
  • 25.401 mm (7)
  • 28.0 mm (1)
  • 31.75 mm (9)
  • 32.0 mm (8)
  • 38.1 mm (5)
  • 40.0 mm (3)
  • 50.0 mm (3)
  • 50.801 mm (3)
  • 63.0 mm (3)
  • 63.5 mm (3)
  • 76.2 mm (3)
  • 80.0 mm (5)
  • 100.0 mm (3)
  • 101.601 mm (2)
  • 125.0 mm (3)
  • 127.0 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 10.0 mm (91)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.394 in (91)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.845 in (1)
  • 0.85 in (1)
  • 0.9 in (1)
  • 0.984 in (12)
  • 1.0 in (1)
  • 1.102 in (7)
  • 1.22 in (4)
  • 1.25 in (4)
  • 1.26 in (5)
  • 1.47 in (3)
  • 1.575 in (11)
  • 1.577 in (9)
  • 1.6 in (5)
  • 1.693 in (3)
  • 1.72 in (2)
  • 1.75 in (3)
  • 1.901 in (2)
  • 1.969 in (8)
  • 2.0 in (3)
  • 2.221 in (1)
  • 2.38 in (2)
  • 2.48 in (3)
Reach Min to Reach Max
Reach
Reach
  • 21.451 mm (1)
  • 21.6 mm (1)
  • 22.85 mm (1)
  • 25.0 mm (12)
  • 25.401 mm (1)
  • 28.0 mm (7)
  • 31.0 mm (4)
  • 31.75 mm (4)
  • 32.0 mm (5)
  • 37.35 mm (3)
  • 40.0 mm (11)
  • 40.051 mm (9)
  • 40.651 mm (5)
  • 43.0 mm (3)
  • 43.7 mm (2)
  • 44.45 mm (3)
  • 48.25 mm (2)
  • 50.0 mm (8)
  • 50.801 mm (3)
  • 56.401 mm (1)
  • 60.45 mm (2)
  • 63.0 mm (3)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (91)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (36)
  • Screw-On Connection (5)
  • Straight-Cylindrical (31)
  • Weldon (19)
Number of Flutes
Number of Flutes
  • 10 (5)
  • 12 (2)
  • 14 (2)
  • 2 (12)
  • 3 (16)
  • 4 (19)
  • 5 (13)
  • 6 (6)
  • 7 (6)
  • 8 (6)
  • 9 (4)
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.016 in (96)
  • 0.031 in (111)
  • 0.047 in (95)
  • 0.063 in (94)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (96)
  • 0.8 mm (111)
  • 1.201 mm (95)
  • 1.6 mm (94)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WK15CM (94)
  • WK15PM (93)
  • WN25PM (93)
  • WP25PM (100)
  • WP35CM (93)
  • WP40PM (95)
  • WS40PM (99)
  • WU10PM (93)
Hand Of Tool
Hand Of Tool
  • R (91)
Wiper Insert
Wiper Insert
  • N (32)
frontEnd
Neck Diameter
Neck Diameter
  • 0.61 in (1)
  • 0.728 in (4)
  • 0.768 in (3)
  • 0.965 in (8)
  • 0.98 in (3)
  • 1.228 in (2)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 15.5 mm (1)
  • 18.5 mm (4)
  • 19.5 mm (3)
  • 24.5 mm (8)
  • 24.901 mm (3)
  • 31.201 mm (2)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • X-RECTANGLE MILL 4 90 (32)
Cutting Edge Length
Cutting Edge Length
  • 10.8 mm (16)
  • 10.826 mm (16)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.425 in (16)
  • 0.426 in (16)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • ALP (2)
  • MH (4)
  • ML (8)
  • MM (18)
Cutting Tool Material
Cutting Tool Material
  • H W (32)
Tolerance Class
Tolerance Class
  • G (16)
  • P (16)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (50)
  • SCREW-ON (5)
  • SHELL MILL (36)
Back-End Diameter
Back-End Diameter
  • 13.0 mm (1)
  • 15.875 mm (3)
  • 16.0 mm (7)
  • 18.0 mm (1)
  • 19.05 mm (18)
  • 20.0 mm (8)
  • 21.0 mm (1)
  • 22.0 mm (6)
  • 25.0 mm (12)
  • 25.401 mm (13)
  • 27.0 mm (3)
  • 29.0 mm (2)
  • 31.75 mm (7)
  • 32.0 mm (2)
  • 38.1 mm (5)
  • 40.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.512 in (1)
  • 0.625 in (3)
  • 0.63 in (7)
  • 0.709 in (1)
  • 0.75 in (18)
  • 0.787 in (8)
  • 0.828 in (1)
  • 0.866 in (6)
  • 0.984 in (12)
  • 1.0 in (13)
  • 1.063 in (3)
  • 1.143 in (2)
  • 1.25 in (7)
  • 1.26 in (2)
  • 1.5 in (5)
  • 1.575 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
カテゴリで絞り込む:
製品を表示
メートル
インチ

オリジナル製品

0°/90°ショルダーミル • VSM490™シリーズ

Weldon®エンドミル • メトリック
(8 Products)
  • 100018357100018357
  • 溝加工:スクエアエンド溝加工:スクエアエンド
  • 側面加工/ショルダー加工:スクエアエンド側面加工/ショルダー加工:スクエアエンド
  • シャンク — ストレートWeldonシャンク — ストレートWeldon
  • ミーリング — スルークーラントミーリング — スルークーラント
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
6425558 VSM490D016Z02B16XN10 VSM490D016Z02B16XN10   16.0000 .6300 16.0 .63 74.0000 2.913 25.0000 .9840 10.0000 .3940 2 48000 Y 0.09
    定価:
    $265,85 /各.
    価格::
    数量
    6425559 VSM490D020Z02B20XN10 VSM490D020Z02B20XN10   20.0000 .7870 20.0 .787 79.0000 3.110 28.0000 1.102 10.0000 .3940 2 40200 Y 0.16
      定価:
      $318,81 /各.
      価格::
      数量
      6425571 VSM490D025Z03B20XN10 VSM490D025Z03B20XN10   25.0000 .9840 20.0 .787 79.0000 3.110 28.0000 1.102 10.0000 .3940 3 34300 Y 0.18
        定価:
        $364,59 /各.
        価格::
        数量
        6425572 VSM490D025Z03B25XN10 VSM490D025Z03B25XN10   25.0000 .9840 25.0 .984 89.0000 3.504 32.0000 1.260 10.0000 .3940 3 34300 Y 0.29
          定価:
          $364,59 /各.
          価格::
          数量
          6425574 VSM490D032Z04B25XN10 VSM490D032Z04B25XN10   32.0000 1.260 25.0 .984 89.0000 3.504 32.0000 1.260 10.0000 .3940 4 29200 Y 0.29
            定価:
            $410,92 /各.
            価格::
            数量
            6425575 VSM490D032Z05B25XN10 VSM490D032Z05B25XN10   32.0000 1.260 25.0 .984 89.0000 3.504 32.0000 1.260 10.0000 .3940 5 29200 Y 0.33
              定価:
              $430,21 /各.
              価格::
              数量
              定価:
              割引: %
              価格::
              配置転換 この品目はありません
              交換品 この品目は、代理店経由で入手できる場合があります
              数量

              販売包装単位

              オリジナル製品

              • フェイスミーリングフェイスミーリング
              • 溝加工:スクエアエンド溝加工:スクエアエンド
              • 側面加工/ショルダー加工:スクエアエンド側面加工/ショルダー加工:スクエアエンド
              • シャンク — ストレート プレーンシャンク — ストレート プレーン
              • ミーリング — スルークーラントミーリング — スルークーラント
              製品を表示
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
              6425503 VSM490D016Z02A16XN10L150 VSM490D016Z02A16XN10L150   16.0000 .6300 16.0 .63 150.0000 5.906 25.0000 .9840 10.0000 .3940 2 48000 Y 0.21
                定価:
                $279,64 /各.
                価格::
                数量
                6425507 VSM490D020Z03A20XN10L150 VSM490D020Z03A20XN10L150   20.0000 .7870 20.0 .787 150.0000 5.906 28.0000 1.102 10.0000 .3940 3 40200 Y 0.33
                  定価:
                  $355,20 /各.
                  価格::
                  数量
                  6425508 VSM490D022Z03A20XN10L150 VSM490D022Z03A20XN10L150   22.0000 .8660 20.0 .787 150.0000 5.905 28.0000 1.102 10.0000 .3940 3 37500 Y 0.34
                    定価:
                    $355,20 /各.
                    価格::
                    数量
                    6425509 VSM490D025Z03A20XN10L100 VSM490D025Z03A20XN10L100   25.0000 .9840 20.0 .787 100.0000 3.937 28.0000 1.102 10.0000 .3940 3 34300 Y 0.23
                      定価:
                      $364,59 /各.
                      価格::
                      数量
                      6425510 VSM490D025Z04A25XN10L100 VSM490D025Z04A25XN10L100   25.0000 .9840 25.0 .984 100.0000 3.937 43.0000 1.693 10.0000 .3940 4 34300 Y 0.33
                        定価:
                        $383,88 /各.
                        価格::
                        数量
                        6425516 VSM490D032Z04A25XN10L200 VSM490D032Z04A25XN10L200   32.0000 1.260 25.0 .984 200.0000 7.874 32.0000 1.260 10.0000 .3940 4 29200 Y 0.75
                          定価:
                          $431,31 /各.
                          価格::
                          数量
                          定価:
                          割引: %
                          価格::
                          配置転換 この品目はありません
                          交換品 この品目は、代理店経由で入手できる場合があります
                          数量

                          販売包装単位

                          オリジナル製品

                          0°/90°ショルダーミル • VSM490™シリーズ

                          スクリューオンエンドミル • メトリック
                          (5 Products)
                          • フェイスミーリングフェイスミーリング
                          • 溝加工:スクエアエンド溝加工:スクエアエンド
                          • 側面加工/ショルダー加工:スクエアエンド側面加工/ショルダー加工:スクエアエンド
                          • シャンク — スクリューオンシャンク — スクリューオン
                          • ミーリング — スルークーラントミーリング — スルークーラント
                          製品を表示
                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
                          6425553 VSM490D016Z02M08XN10 VSM490D016Z02M08XN10   16.0000 .6300 13.0 .512 8.5000 .3340 M8 25.0000 .9840 10.0000 .3940 10.0000 .3940 2 48000 Y 0.03
                            定価:
                            $226,13 /各.
                            価格::
                            数量
                            6425554 VSM490D020Z03M10XN10 VSM490D020Z03M10XN10   20.0000 .7870 18.0 .709 10.5000 .4130 M10 28.0000 1.102 15.0000 .5890 10.0000 .3940 3 40200 Y 0.05
                              定価:
                              $287,37 /各.
                              価格::
                              数量
                              6425555 VSM490D025Z04M12XN10 VSM490D025Z04M12XN10   25.0000 .9840 21.0 .827 12.5000 .4920 M12 32.0000 1.260 17.0000 .6690 10.0000 .3940 4 34300 Y 0.09
                                定価:
                                $326,51 /各.
                                価格::
                                数量
                                6425556 VSM490D032Z05M16XN10 VSM490D032Z05M16XN10   32.0000 1.260 29.0 1.142 17.0000 .6690 M16 40.0000 1.575 24.0000 .9430 10.0000 .3940 5 29200 Y 0.20
                                  定価:
                                  $365,68 /各.
                                  価格::
                                  数量
                                  6425557 VSM490D032Z06M16XN10 VSM490D032Z06M16XN10   32.0000 1.260 29.0 1.142 17.0000 .6690 M16 40.0000 1.575 24.0000 .9430 10.0000 .3940 6 29200 Y 0.20
                                    定価:
                                    $382,24 /各.
                                    価格::
                                    数量
                                    定価:
                                    割引: %
                                    価格::
                                    配置転換 この品目はありません
                                    交換品 この品目は、代理店経由で入手できる場合があります
                                    数量

                                    販売包装単位

                                    オリジナル製品

                                    0°/90°ショルダーミル • VSM490™シリーズ

                                    インサート • XNGU-MM • 中切削加工に対応するユニバーサル形状
                                    (5 Products)
                                    製品を表示
                                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                    6425416 XNGU100404SRMM XNGU1001SRMM WP25PM   4 11.6640 .4592 4.8300 .1900 6.6000 .2598 1.3700 .0540 0.4000 .0160 0.0800 .0031
                                      定価:
                                      $19,56 /各.
                                      価格::
                                      数量
                                      6425417 XNGU100404SRMM XNGU1001SRMM WS40PM   4 11.6640 .4592 4.8300 .1900 6.6000 .2598 1.3700 .0540 0.4000 .0160 0.0800 .0031
                                        定価:
                                        $19,93 /各.
                                        価格::
                                        数量
                                        6425422 XNGU100408SRMM XNGU1002SRMM WP25PM   4 11.6640 .4592 4.8300 .1900 6.6000 .2598 1.0000 .0390 0.8000 .0310 0.0800 .0031
                                          定価:
                                          $19,56 /各.
                                          価格::
                                          数量
                                          6425424 XNGU100408SRMM XNGU1002SRMM WU10PM   4 11.6640 .4592 4.8300 .1900 6.6000 .2598 1.0000 .0390 0.8000 .0310 0.0800 .0031
                                            定価:
                                            $19,56 /各.
                                            価格::
                                            数量
                                            6425423 XNGU100408SRMM XNGU1002SRMM WS40PM   4 11.6640 .4592 4.8300 .1900 6.6000 .2598 1.0000 .0390 0.8000 .0310 0.0800 .0031
                                              定価:
                                              $19,93 /各.
                                              価格::
                                              数量
                                              定価:
                                              割引: %
                                              価格::
                                              配置転換 この品目はありません
                                              交換品 この品目は、代理店経由で入手できる場合があります
                                              数量

                                              販売包装単位

                                              オリジナル製品

                                              0°/90°ショルダーミル • VSM490™シリーズ

                                              インサート • XNPU-ML • 軽切削加工
                                              (3 Products)
                                              製品を表示
                                              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                              6425368 XNPU100408ERML XNPU1002ERML WS40PM   4 11.6000 .4570 4.8300 .1900 6.6000 .2598 0.9000 .0360 0.8000 .0310 0.0200 .0008
                                                定価:
                                                $15,80 /各.
                                                価格::
                                                数量
                                                6425367 XNPU100408ERML XNPU1002ERML WP25PM   4 11.6000 .4570 4.8300 .1900 6.6000 .2598 0.9000 .0360 0.8000 .0310 0.0200 .0008
                                                  定価:
                                                  $15,51 /各.
                                                  価格::
                                                  数量
                                                  6425366 XNPU100408ERML XNPU1002ERML WK15PM   4 11.6000 .4570 4.8300 .1900 6.6000 .2598 0.9000 .0360 0.8000 .0310 0.0200 .0008
                                                    定価:
                                                    $15,51 /各.
                                                    価格::
                                                    数量
                                                    定価:
                                                    割引: %
                                                    価格::
                                                    配置転換 この品目はありません
                                                    交換品 この品目は、代理店経由で入手できる場合があります
                                                    数量

                                                    販売包装単位

                                                    オリジナル製品

                                                    0°/90°ショルダーミル • VSM490™シリーズ

                                                    インサート • XNGU-ML • 精密仕上げおよび軽切削加工
                                                    (5 Products)
                                                    製品を表示
                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                    6425415 XNGU100404ERML XNGU1001ERML WS40PM   4 11.6640 .4592 4.8300 .1900 6.6000 .2598 1.3700 .0540 0.4000 .0160 0.0200 .0008
                                                      定価:
                                                      $19,93 /各.
                                                      価格::
                                                      数量
                                                      6425414 XNGU100404ERML XNGU1001ERML WP25PM   4 11.6640 .4592 4.8300 .1900 6.6000 .2598 1.3700 .0540 0.4000 .0160 0.0200 .0008
                                                        定価:
                                                        $19,56 /各.
                                                        価格::
                                                        数量
                                                        6425369 XNGU100408ERML XNGU1002ERML WP25PM   4 11.6640 .4592 4.8300 .1900 6.6000 .2598 1.0000 .0390 0.8000 .0310 0.0200 .0008
                                                          定価:
                                                          $19,56 /各.
                                                          価格::
                                                          数量
                                                          6425370 XNGU100408ERML XNGU1002ERML WS40PM   4 11.6640 .4592 4.8300 .1900 6.6000 .2598 1.0000 .0390 0.8000 .0310 0.0200 .0008
                                                            定価:
                                                            $19,93 /各.
                                                            価格::
                                                            数量
                                                            6425421 XNGU100408ERML XNGU1002ERML WU10PM   4 11.6640 .4592 4.8300 .1900 6.6000 .2598 1.0000 .0390 0.8000 .0310 0.0200 .0008
                                                              定価:
                                                              $19,56 /各.
                                                              価格::
                                                              数量
                                                              定価:
                                                              割引: %
                                                              価格::
                                                              配置転換 この品目はありません
                                                              交換品 この品目は、代理店経由で入手できる場合があります
                                                              数量

                                                              販売包装単位

                                                              オリジナル製品

                                                              0°/90°ショルダーミル • VSM490™シリーズ

                                                              インサート • XNPU-MM • 中切削加工に対応するユニバーサル形状
                                                              (13 Products)
                                                              製品を表示
                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                              6425362 XNPU100408SRMM XNPU1002SRMM WS40PM   4 11.6000 .4570 4.8300 .1900 6.6000 .2598 0.9000 .0360 0.8000 .0310 0.0800 .0031
                                                                定価:
                                                                $15,80 /各.
                                                                価格::
                                                                数量
                                                                6425364 XNPU100408SRMM XNPU1002SRMM WK15CM   4 11.6000 .4570 4.8300 .1900 6.6000 .2598 0.9000 .0360 0.8000 .0310 0.0800 .0031
                                                                  定価:
                                                                  $15,51 /各.
                                                                  価格::
                                                                  数量
                                                                  6425365 XNPU100408SRMM XNPU1002SRMM WP35CM   4 11.6000 .4570 4.8300 .1900 6.6000 .2598 0.9000 .0360 0.8000 .0310 0.0800 .0031
                                                                    定価:
                                                                    $15,51 /各.
                                                                    価格::
                                                                    数量
                                                                    6425354 XNPU100412SRMM XNPU1003SRMM WP40PM   4 11.6080 .4570 4.8300 .1900 6.6000 .2598 0.5000 .0220 1.2000 .0470 0.0800 .0031
                                                                      定価:
                                                                      $15,51 /各.
                                                                      価格::
                                                                      数量
                                                                      6425353 XNPU100412SRMM XNPU1003SRMM WS40PM   4 11.6080 .4570 4.8300 .1900 6.6000 .2598 0.5000 .0220 1.2000 .0470 0.0800 .0031
                                                                        定価:
                                                                        $15,80 /各.
                                                                        価格::
                                                                        数量
                                                                        6425355 XNPU100412SRMM XNPU1003SRMM WK15CM   4 11.6080 .4570 4.8300 .1900 6.6000 .2598 0.5000 .0220 1.2000 .0470 0.0800 .0031
                                                                          定価:
                                                                          $15,51 /各.
                                                                          価格::
                                                                          数量
                                                                          定価:
                                                                          割引: %
                                                                          価格::
                                                                          配置転換 この品目はありません
                                                                          交換品 この品目は、代理店経由で入手できる場合があります
                                                                          数量

                                                                          販売包装単位

                                                                          オリジナル製品

                                                                          0°/90°ショルダーミル • VSM490™シリーズ

                                                                          インサート • XNGU-MH • 重切削粗加工
                                                                          (4 Products)
                                                                          製品を表示
                                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [W] Insert Width [W] Insert Width [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                                          6425357 XNGU100408SRMH XNGU1002SRMH WP40PM   4 11.6610 .4591 4.8300 .1900 6.6000 .2598 0.9000 .0360 0.8000 .0320 0.0800 .0031
                                                                            定価:
                                                                            $21,62 /各.
                                                                            価格::
                                                                            数量
                                                                            6425356 XNGU100408SRMH XNGU1002SRMH WP25PM   4 11.6610 .4591 4.8300 .1900 6.6000 .2598 0.9000 .0360 0.8000 .0320 0.0800 .0031
                                                                              定価:
                                                                              $21,62 /各.
                                                                              価格::
                                                                              数量
                                                                              6425360 XNGU100408SRMH XNGU1002SRMH