Cast Iron Milling Beast

M8090 is a fine pitch face milling series for rough, semi-finish and finish milling of a variety of cast and nodular irons at high-feed rates. 

The M8090 face mill is designed with an 89-degree approach angle for rough and semi-finish milling applications in cast iron and nodular iron with the added flexibility of using carbide or ceramic inserts on the same cutter based on productivity needs.

The M8090-F finish mill is designed to achieve a surface finish <1.6 microns Ra in cast iron finish milling applications at high feeds.

M8090 Series Face Mill (ISO Catalog # M8090D100Z12S32SN12 | MM # 6467715)

M8090 Face Mill

Rough and semi-finish milling of cast iron and nodular iron

  • 89-degree approach angle for machining close to fixture elements
  • Eight cutting edges on the insert for low cost per component
  • Wedge clamping system that easily indexes the insert and reduces setup times
  • Positive insert geometry
M8090-F Series Face Mill (ISO Catalog # M8090FD125Z12W2S40SN12 | MM # 6381961)

M8090-F Series Face Mill

Semi-finish and finish milling of cast iron and nodular iron

  • Fine-pitch cutter with fixed pocket for semi-finisher inserts and adjustable pockets for wiper inserts
  • Eight cutting edges per insert and four cutting edges on wiper insert
  • Wedge clamping system that easily indexes insert
  • Axial adjustable wiper pocket seats to set up axial run out with .005mm

Inserts are offered in carbide grades: WK15PM, ceramic grade WK25YM and PcBN grade WBK40U.

M8090 Series SNEN Ceramic Insert (ISO Catalog # SNEN120412SNHN |MM # 6880278)

SNEN Insert

Ceramic insert with eight effective cutting edges for cast iron applications

M8090 Series SNHF Roughing Insert (ISO Catalog # SNHF120412SNMM | MM # 6870510)

-MM Insert

Insert with eight effective cutting edges and a positive geometry to work on weak fixtures in cast iron applications

M8090-F Series SDEN Wiper Insert (ISO Catalog # SDEN1204PDEN4WC | MM # 6458851)

M8090-F Wiper Insert

Wiper insert with four effective cutting edges for cast iron finishing applications

フィルタを選択
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • K Cast Iron (34)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (34)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (34)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (34)
  • N Non-Ferrous Materials (10)
    • N1
      Wrought Aluminum (10)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (10)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (10)
Select All Star
  • CN (12)
  • DE (24)
  • IN (25)
Applications
Applications
  • Face Milling Face Milling (29)
Cutting Diameter
Cutting Diameter
  • 2.48 in (2)
  • 3.15 in (3)
  • 3.938 in (3)
  • 4.0 in (3)
  • 4.921 in (3)
  • 6.0 in (3)
  • 6.299 in (3)
  • 7.875 in (3)
  • 8.0 in (3)
  • 9.843 in (3)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 63.0 mm (2)
  • 80.0 mm (3)
  • 100.0 mm (3)
  • 101.601 mm (3)
  • 125.0 mm (3)
  • 152.4 mm (3)
  • 160.0 mm (3)
  • 200.0 mm (3)
  • 203.201 mm (3)
  • 250.0 mm (3)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 63.375 mm (2)
  • 80.375 mm (3)
  • 100.375 mm (3)
  • 101.976 mm (3)
  • 125.375 mm (3)
  • 152.775 mm (3)
  • 160.375 mm (3)
  • 200.375 mm (3)
  • 203.576 mm (3)
  • 250.375 mm (3)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 2.495 in (2)
  • 3.164 in (3)
  • 3.952 in (3)
  • 4.015 in (3)
  • 4.936 in (3)
  • 6.016 in (3)
  • 6.314 in (3)
  • 7.889 in (3)
  • 8.015 in (3)
  • 9.857 in (3)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 11.5 mm (29)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.453 in (29)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 1.575 in (2)
  • 1.969 in (6)
  • 2.0 in (3)
  • 2.38 in (4)
  • 2.48 in (14)
Reach Min to Reach Max
Reach
Reach
  • 40.0 mm (2)
  • 50.0 mm (6)
  • 50.801 mm (3)
  • 60.45 mm (4)
  • 63.0 mm (14)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 89.0 (29)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (5)
  • B-Cutter Retention Screw (13)
  • C-Bolt Circle (11)
Number of Flutes
Number of Flutes
  • 10 (4)
  • 12 (4)
  • 15 (2)
  • 16 (1)
  • 18 (6)
  • 24 (5)
  • 28 (2)
  • 5 (1)
  • 7 (2)
  • 8 (1)
  • 9 (1)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 4.0 (32)
  • 8.0 (31)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.575 in (2)
  • 1.969 in (6)
  • 2.0 in (3)
  • 2.38 in (4)
  • 2.48 in (14)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (2)
  • 50.0 mm (6)
  • 50.801 mm (3)
  • 60.45 mm (4)
  • 63.0 mm (14)
Over All Length [L] Min to Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.031 in (11)
  • 0.047 in (32)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.8 mm (11)
  • 1.201 mm (32)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM-F (10)
  • TN7110 (29)
  • WBK40U (10)
  • WK15CM (30)
  • WK15PM (30)
  • WK25YM (30)
Hand Of Tool
Hand Of Tool
  • R (29)
Wiper Insert
Wiper Insert
  • N (3)
  • Y (2)
frontEnd
Insert Shape
Insert Shape
  • S-SQUARE 90 (33)
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • S-SQUARE 90 (4)
Insert IC Size
Insert IC Size
  • 12.701 mm (5)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.5 in (5)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 12.701 mm (5)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.5 in (5)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • MM (2)
Cutting Tool Material
Cutting Tool Material
  • B H (1)
  • C N (1)
  • H W (3)
Tolerance Class
Tolerance Class
  • E (3)
  • H (2)
backEnd
Connection Type
Connection Type
  • SHELL MILL (29)
Back-End Diameter
Back-End Diameter
  • 22.0 mm (2)
  • 27.0 mm (3)
  • 31.75 mm (3)
  • 32.0 mm (3)
  • 40.0 mm (6)
  • 50.801 mm (3)
  • 60.0 mm (6)
  • 63.5 mm (3)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.866 in (2)
  • 1.063 in (3)
  • 1.25 in (3)
  • 1.26 in (3)
  • 1.575 in (6)
  • 2.0 in (3)
  • 2.362 in (6)
  • 2.5 in (3)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
マイソリューションページにを追加しようとしています. 続行しますか?
product-image
Please adjust the following properties from

ISO製品型番

ANSI製品型番

to find similar products.

The following files are available

Please select a file to download

Models

ダッシュボード情報を表示するには、ログインする必要があります
Session expired due to inactivity, please login again
カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
アイテムがカートに正常に追加されました
カートを表示

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO製品型番 材種    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

ご登録いただきありがとうございます。今からウェブサイトにアクセス頂き、ご利用が可能でございます。

You are about to leave the Solution building process.

Are you sure you want to leave?