通知

すべて既読にする
Mobile Menu

M370™シリーズは、高フィード量により生産性を向上させるよう設計されています。

M370™シリーズは、高フィード量により生産性を向上させるよう設計されており、両面コンセプトと6枚刃仕様により、安全性と最適な切り屑除去率、さらに切れ刃あたりのコスト効率を実現しています。

  • 非常に高い切り屑除去率
  • 高フィード粗加工のアプリケーションの第1選択
  • クーラント穴付き
  • インサートあたり6枚の切れ刃
  • 複数タイプのカッター本体
フィルタを選択
Filters
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (85)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (80)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (85)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (85)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (85)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (85)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (85)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (85)
  • M Stainless Steel (85)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (85)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (85)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (85)
  • K Cast Iron (73)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (73)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (73)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (73)
  • N Non-Ferrous Materials (65)
    • N1
      Wrought Aluminum
      (65)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (65)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (65)
  • S High-Temp Alloys (83)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (81)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (81)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (81)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (83)
  • H Hardened Materials (67)
    • H1
      Hardened Materials 44-48 HRC
      (67)
Select All Star
  • CN (9)
  • DE (27)
  • GB (12)
  • IN (6)
  • SG (14)
  • US (24)
Applications
Applications
  • Chamfer Milling Chamfer Milling (2)
  • Face Milling Face Milling (60)
  • Pocket Pocket (60)
  • Pocket Helical Pocket Helical (58)
  • Pocket Milling Pocket Milling (60)
  • Pocket Plunge Milling Pocket Plunge Milling (59)
  • Profile Milling Profile Milling (60)
  • Ramping Ramping (60)
  • Shoulder Milling Shoulder Milling (58)
  • Shoulder Roughing Shoulder Roughing (58)
  • Slot Milling Slot Milling (58)
  • Slot Square End Slot Square End (1)
Cutting Diameter
Cutting Diameter
  • 0.441 in (3)
  • 0.445 in (3)
  • 0.457 in (3)
  • 0.461 in (1)
  • 0.555 in (1)
  • 0.702 in (2)
  • 0.711 in (1)
  • 0.713 in (2)
  • 0.717 in (1)
  • 0.838 in (2)
  • 0.95 in (1)
  • 0.954 in (2)
  • 1.024 in (1)
  • 1.028 in (1)
  • 1.102 in (1)
  • 1.303 in (1)
  • 1.335 in (2)
  • 1.383 in (1)
  • 1.417 in (2)
  • 1.449 in (2)
  • 1.499 in (2)
  • 1.815 in (2)
  • 1.835 in (2)
  • 1.931 in (1)
  • 1.932 in (1)
  • 1.949 in (1)
  • 2.043 in (1)
  • 2.273 in (1)
  • 2.329 in (1)
  • 2.334 in (3)
  • 2.449 in (1)
  • 2.483 in (2)
  • 2.598 in (1)
  • 3.27 in (2)
  • 3.333 in (2)
  • 4.255 in (2)
  • 4.333 in (1)
  • 5.333 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 11.201 mm (3)
  • 11.3 mm (3)
  • 11.601 mm (3)
  • 11.701 mm (1)
  • 14.101 mm (1)
  • 17.8 mm (2)
  • 18.05 mm (1)
  • 18.1 mm (2)
  • 18.2 mm (1)
  • 21.276 mm (2)
  • 24.1 mm (1)
  • 24.201 mm (2)
  • 26.0 mm (1)
  • 26.1 mm (1)
  • 28.0 mm (1)
  • 33.1 mm (1)
  • 33.9 mm (2)
  • 35.1 mm (1)
  • 36.0 mm (2)
  • 36.801 mm (2)
  • 38.075 mm (2)
  • 46.1 mm (2)
  • 46.6 mm (2)
  • 49.051 mm (1)
  • 49.075 mm (1)
  • 49.5 mm (1)
  • 51.901 mm (1)
  • 57.7 mm (1)
  • 59.151 mm (1)
  • 59.276 mm (3)
  • 62.2 mm (1)
  • 63.075 mm (2)
  • 66.0 mm (1)
  • 83.051 mm (2)
  • 84.65 mm (2)
  • 108.051 mm (2)
  • 110.051 mm (1)
  • 135.451 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 25.0 mm (6)
  • 25.401 mm (4)
  • 28.0 mm (1)
  • 31.75 mm (2)
  • 32.0 mm (4)
  • 38.1 mm (5)
  • 40.0 mm (2)
  • 42.0 mm (1)
  • 50.0 mm (3)
  • 50.801 mm (4)
  • 52.0 mm (3)
  • 63.0 mm (3)
  • 63.5 mm (3)
  • 66.0 mm (2)
  • 76.2 mm (6)
  • 80.0 mm (3)
  • 100.0 mm (2)
  • 101.601 mm (2)
  • 125.0 mm (2)
  • 127.0 mm (1)
  • 152.4 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.984 in (6)
  • 1.0 in (4)
  • 1.102 in (1)
  • 1.25 in (2)
  • 1.26 in (4)
  • 1.5 in (5)
  • 1.575 in (2)
  • 1.655 in (1)
  • 1.969 in (3)
  • 2.0 in (4)
  • 2.047 in (3)
  • 2.48 in (3)
  • 2.5 in (3)
  • 2.598 in (2)
  • 3.0 in (6)
  • 3.15 in (3)
  • 3.938 in (2)
  • 4.0 in (2)
  • 4.921 in (2)
  • 5.0 in (1)
  • 6.0 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 1.25 mm (35)
  • 2.0 mm (25)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.049 in (35)
  • 0.079 in (25)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 1.379 in (3)
  • 1.5 in (7)
  • 1.575 in (15)
  • 1.69 in (1)
  • 1.693 in (2)
  • 1.75 in (3)
  • 1.969 in (18)
  • 1.971 in (1)
  • 2.0 in (5)
  • 2.375 in (2)
  • 2.48 in (2)
  • 2.5 in (1)
Reach Min to Reach Max
Reach
Reach
  • 35.0 mm (3)
  • 38.1 mm (7)
  • 40.0 mm (15)
  • 42.926 mm (1)
  • 43.0 mm (2)
  • 44.45 mm (3)
  • 50.0 mm (18)
  • 50.051 mm (1)
  • 50.801 mm (5)
  • 60.325 mm (2)
  • 63.0 mm (2)
  • 63.5 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 12.0 (34)
  • 15.0 (24)
  • 75.0 (1)
  • 78.0 (1)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • 2 Key & Cutter Retention Screw (1)
  • 2 Key & Socket Head Cap Screw (1)
  • A-Socket Head Cap Screw (36)
  • Screw-On Connection (5)
  • Straight-Cylindrical (17)
Number of Flutes
Number of Flutes
  • 2 (7)
  • 3 (10)
  • 4 (11)
  • 5 (11)
  • 6 (11)
  • 7 (6)
  • 8 (2)
  • 9 (2)
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.048 in (47)
  • 0.05 in (40)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 1.225 mm (47)
  • 1.276 mm (40)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TN5515 (35)
  • TN6520 (35)
  • TN6525 (37)
  • TN6540 (37)
  • TN7535 (35)
  • WK15CM (62)
  • WP20CM (25)
  • WP25PM (65)
  • WP35CM (27)
  • WP40PM (65)
  • WS30PM (62)
  • WS40PM (65)
  • WU35PM (27)
Hand Of Tool
Hand Of Tool
  • R (60)
Wiper Insert
Wiper Insert
  • N (27)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.48 (1)
  • 0.5 (3)
  • 0.62 (1)
  • 0.66 (1)
  • 0.8 (1)
  • 0.81 (1)
  • 0.83 (3)
  • 0.84 (2)
  • 1.0 (3)
  • 1.01 (1)
  • 1.09 (2)
  • 1.3 (4)
  • 1.41 (6)
  • 1.46 (2)
  • 1.5 (3)
  • 1.73 (1)
  • 1.8 (2)
  • 1.9 (4)
  • 2.05 (3)
  • 2.09 (5)
  • 2.4 (1)
  • 2.5 (3)
  • 2.6 (1)
  • 3.5 (1)
  • 3.6 (2)
  • 3.7 (1)
  • 6.4 (2)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
frontEnd
Insert Shape
Insert Shape
  • X-TRIGON WO_J 101.5 (77)
  • X-TRIGON WO_J 80 (45)
Neck Diameter
Neck Diameter
  • 0.828 in (1)
  • 0.843 in (3)
  • 0.866 in (3)
  • 0.906 in (1)
  • 1.093 in (2)
  • 1.143 in (3)
  • 1.196 in (1)
  • 1.324 in (1)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 21.0 mm (1)
  • 21.401 mm (3)
  • 22.0 mm (3)
  • 23.0 mm (1)
  • 27.75 mm (2)
  • 29.0 mm (3)
  • 30.375 mm (1)
  • 33.625 mm (1)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • X-TRIGON WO_J 101.5 (17)
  • X-TRIGON WO_J 80 (10)
Insert IC Size
Insert IC Size
  • 7.801 mm (12)
  • 12.0 mm (15)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.307 in (12)
  • 0.473 in (15)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.301 mm (12)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.248 in (12)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • MH (12)
  • MM (12)
  • MR (3)
Cutting Tool Material
Cutting Tool Material
  • H W (27)
Tolerance Class
Tolerance Class
  • E (27)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (17)
  • SCREW-ON (5)
  • SHELL MILL (38)
Back-End Diameter
Back-End Diameter
  • 12.701 mm (1)
  • 16.0 mm (2)
  • 19.05 mm (3)
  • 19.1 mm (3)
  • 21.0 mm (3)
  • 22.0 mm (9)
  • 25.0 mm (5)
  • 25.401 mm (8)
  • 27.0 mm (5)
  • 29.0 mm (2)
  • 31.701 mm (2)
  • 31.75 mm (2)
  • 31.8 mm (2)
  • 32.0 mm (5)
  • 38.1 mm (5)
  • 40.0 mm (2)
  • 50.801 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.5 in (1)
  • 0.63 in (2)
  • 0.75 in (3)
  • 0.752 in (3)
  • 0.828 in (3)
  • 0.866 in (9)
  • 0.984 in (5)
  • 1.0 in (8)
  • 1.063 in (5)
  • 1.143 in (2)
  • 1.248 in (2)
  • 1.25 in (2)
  • 1.252 in (2)
  • 1.26 in (5)
  • 1.5 in (5)
  • 1.575 in (2)
  • 2.0 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

インサート • 大型 • WOEJ-MH
(6 Products)
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius
5338818 WOEJ120712SRMH WOEJ120712SRMH WP25PM   6 12.0000 .4720 7.3000 .2870 1.2700 .0500
    定価:
    $26,77 /各.
    価格::
    数量
    5338860 WOEJ120712SRMH WOEJ120712SRMH WK15CM   6 12.0000 .4720 7.3000 .2870 1.2700 .0500
      定価:
      $26,77 /各.
      価格::
      数量
      5338862 WOEJ120712SRMH WOEJ120712SRMH WP35CM   6 12.0000 .4720 7.3000 .2870 1.2700 .0500
        定価:
        $26,77 /各.
        価格::
        数量
        5542347 WOEJ120712SRMH WOEJ120712SRMH WP40PM   6 12.0000 .4720 7.3000 .2870 1.2700 .0500
          定価:
          $26,77 /各.
          価格::
          数量
          5338819 WOEJ120712SRMH WOEJ120712SRMH WU35PM   6 12.0000 .4720 7.3000 .2870 1.2700 .0500
            定価:
            $26,77 /各.
            価格::
            数量
            6411157 WOEJ120712SRMH WOEJ120712SRMH WS40PM   6 12.0000 .4720 7.3000 .2870 1.2700 .0500
              定価:
              $27,27 /各.
              価格::
              数量
              定価:
              割引: %
              価格::
              配置転換 この品目はありません
              交換品 この品目は、代理店経由で入手できる場合があります
              数量

              販売包装単位

              オリジナル製品

              インサート • 中切削 • WOEJ-MH
              (6 Products)
              製品を表示
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius
              4052411 WOEJ080412SRMH WOEJ080412SRMH TN6525   6 7.7940 .3069 4.7500 .1870 1.2200 .0482
                定価:
                $22,64 /各.
                価格::
                数量
                5544752 WOEJ080412SRMH WOEJ080412SRMH WP40PM   6 7.7940 .3069 4.7500 .1870 1.2200 .0482
                  定価:
                  $22,78 /各.
                  価格::
                  数量
                  5564596 WOEJ080412SRMH WOEJ080412SRMH WP25PM   6 7.7940 .3069 4.7500 .1870 1.2200 .0482
                    定価:
                    $22,77 /各.
                    価格::
                    数量
                    5427443 WOEJ080412SRMH WOEJ080412SRMH WK15CM   6 7.7940 .3069 4.7500 .1870 1.2200 .0482
                      定価:
                      $22,64 /各.
                      価格::
                      数量
                      6333664 WOEJ080412SRMH WOEJ080412SRMH WS40PM   6 7.7940 .3069 4.7500 .1870 1.2200 .0482
                        定価:
                        $24,20 /各.
                        価格::
                        数量
                        4052410 WOEJ080412SRMH WOEJ080412SRMH TN6540   6 7.7940 .3069 4.7500 .1870 1.2200 .0482
                          定価:
                          $22,64 /各.
                          価格::
                          数量
                          定価:
                          割引: %
                          価格::
                          配置転換 この品目はありません
                          交換品 この品目は、代理店経由で入手できる場合があります
                          数量

                          販売包装単位

                          オリジナル製品

                          インサート • 中切削 • WOEJ-MM
                          (6 Products)
                          製品を表示
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius
                          5520248 WOEJ080412SRMM WOEJ080412SRMM WS30PM   6 7.7940 .3068 4.6980 .1850 1.2200 .0482
                            定価:
                            $23,75 /各.
                            価格::
                            数量
                            5544753 WOEJ080412SRMM WOEJ080412SRMM WP40PM   6 7.7940 .3068 4.6980 .1850 1.2200 .0482
                              定価:
                              $22,78 /各.
                              価格::
                              数量
                              5564597 WOEJ080412SRMM WOEJ080412SRMM WP25PM   6 7.7940 .3068 4.6980 .1850 1.2200 .0482
                                定価:
                                $22,77 /各.
                                価格::
                                数量
                                6333665 WOEJ080412SRMM WOEJ080412SRMM WS40PM   6 7.7940 .3068 4.6980 .1850 1.2200 .0482
                                  定価:
                                  $24,20 /各.
                                  価格::
                                  数量
                                  4113892 WOEJ080412SRMM WOEJ080412SRMM TN6525   6 7.7940 .3068 4.6980 .1850 1.2200 .0482
                                    定価:
                                    $22,64 /各.
                                    価格::
                                    数量
                                    4113915 WOEJ080412SRMM WOEJ080412SRMM TN6540   6 7.7940 .3068 4.6980 .1850 1.2200 .0482
                                      定価:
                                      $22,64 /各.
                                      価格::
                                      数量
                                      定価:
                                      割引: %
                                      価格::
                                      配置転換 この品目はありません
                                      交換品 この品目は、代理店経由で入手できる場合があります
                                      数量

                                      販売包装単位

                                      オリジナル製品

                                      インサート • 大型 • WOEJ-MM
                                      (6 Products)
                                      製品を表示
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius
                                      5419649 WOEJ120712SRMM WOEJ120712SRMM WU35PM   6 12.0000 .4720 7.3000 .2870 1.2700 .0500
                                        定価:
                                        $26,77 /各.
                                        価格::
                                        数量
                                        5419648 WOEJ120712SRMM WOEJ120712SRMM WP25PM   6 12.0000 .4720 7.3000 .2870 1.2700 .0500
                                          定価:
                                          $26,77 /各.
                                          価格::
                                          数量
                                          5542346 WOEJ120712SRMM WOEJ120712SRMM WP40PM   6 12.0000 .4720 7.3000 .2870 1.2700 .0500
                                            定価:
                                            $26,77 /各.
                                            価格::
                                            数量
                                            5520249 WOEJ120712SRMM WOEJ120712SRMM WS30PM   6 12.0000 .4720 7.3000 .2870 1.2700 .0500
                                              定価:
                                              $26,77 /各.
                                              価格::
                                              数量
                                              6284471 WOEJ120712SRMM WOEJ120712SRMM WS40PM   6 12.0000 .4720 7.3000 .2870 1.2700 .0500
                                                定価:
                                                $27,27 /各.
                                                価格::
                                                数量
                                                5419791 WOEJ120712SRMM WOEJ120712SRMM WP35CM   6 12.0000 .4720 7.3000 .2870 1.2700 .0500
                                                  定価:
                                                  $26,77 /各.
                                                  価格::
                                                  数量
                                                  定価:
                                                  割引: %
                                                  価格::
                                                  配置転換 この品目はありません
                                                  交換品 この品目は、代理店経由で入手できる場合があります
                                                  数量

                                                  販売包装単位

                                                  オリジナル製品

                                                  インサート • 大型 • WOEJ-MR
                                                  (3 Products)
                                                  製品を表示
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius
                                                  5698342 WOEJ120712SRMR WOEJ120712SRMR WP40PM   6 12.0000 .4720 7.1000 .2795 1.2700 .0500
                                                    定価:
                                                    $26,77 /各.
                                                    価格::
                                                    数量
                                                    5698343 WOEJ120712SRMR WOEJ120712SRMR WP25PM   6 12.0000 .4720 7.1000 .2795 1.2700 .0500
                                                      定価:
                                                      $26,77 /各.
                                                      価格::
                                                      数量