ソリューションに戻る
ソリューション編集
ソリューション追加
ソリューション名: {{SolutionName}}
M270トロイダル • TF
トロイダルインサート
メートル
インチ
| SAP Material Number | 2207626 |
| ISO Catalog Number | M270TF20R4 |
| ANSI Catalog Number | M270TF20R4 |
| Grade | TN2505 |
| Cutting Edges per Insert | 2 |
| [W] Cutting Width | 20.0000 mm |
| [W] Cutting Width | .7870 in |
| [S] Insert Thickness | 4.7600 mm |
| [S] Insert Thickness | .1874 in |
| [RR] Corner Radius | 4.0220 mm |
| [RR] Corner Radius | .1583 in |
| Average Chip Thickness [HM] | 0.1000 mm |
| Average Chip Thickness [HM] | .0039 in |
ワーク材料
P
Steel
K
Cast Iron
H
Hardened Materials
特徴と利点
- 仕上げ加工および準仕上げ加工のアプリケーション向け精密インサート。
- バックドラフト設計で、振動を最低限に抑え、表面仕上げを向上。
等級
-
TN2505P SteelH Hardened MaterialsK Cast Iron
| Light Machining | General Purpose | Heavy Machining | ||||
| Material Group | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | TF | WU10PM | TF | WU10PM | TF | WU10PM |
| P3–P4 | TF | WU10PM | TF | WU10PM | TF | WU10PM |
| P5–P6 | TF | WU10PM | TF | WU10PM | – | – |
| M1–M2 | TF | WU10PM | – | – | – | – |
| M3 | TF | WU10PM | – | – | – | – |
| K1–K2 | TF | WU10PM | TF | WU10PM | – | – |
| K3 | TF | WU10PM | TF | WU10PM | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | TF | WU10PM | – | – | – | – |
| S3 | TF | WU10PM | – | – | – | – |
| S4 | TF | WU10PM | – | – | – | – |
| H1 | TF | TN2505 | TF | WU10PM | – | – |
| Light Machining | General Purpose | Heavy Machining | ||||
| Material Group | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | TF | TN2505 | – | – | – | – |
| P3–P4 | TF | TN2505 | – | – | – | – |
| P5–P6 | TF | TN2505 | – | – | – | – |
| M1–M2 | – | – | – | – | – | – |
| M3 | – | – | – | – | – | – |
| K1–K2 | TF | TN2505 | – | – | – | – |
| K3 | TF | TN2505 | – | – | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | TF | TN2505 | TF | TN2505 | – | – |
推奨フィード量の開始値［mm］
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 100 % | ||||||||||||
| TF | 0,12 | 0,37 | 0,62 | 0,09 | 0,26 | 0,43 | 0,06 | 0,19 | 0,31 | 0,06 | 0,17 | 0,27 | 0,05 | 0,15 | 0,25 | TF |
| Light Machining | General Purpose | Heavy Machining |
Recommended Starting Feeds [IPT]
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 100% | ||||||||||||
| TF | .005 | .014 | .024 | .003 | .010 | .017 | .002 | .007 | .012 | .002 | .006 | .011 | .002 | .006 | .010 | TF |
| Light Machining | General Purpose | Heavy Machining |
推奨切削速度の開始値［m/min］
| Material Group | TN2505 | TN6525 | TN6540 | WP35CM | WU10PM | |||||||||||
| P | 1 | 550 | 420 | 360 | 410 | 320 | 280 | 360 | 280 | 240 | 455 | 395 | 370 | – | – | – |
| 2 | 320 | 240 | 205 | 320 | 250 | 215 | 250 | 190 | 170 | 280 | 255 | 230 | – | – | – | |
| 3 | 320 | 240 | 205 | 280 | 215 | 185 | 215 | 170 | 140 | 255 | 230 | 205 | – | – | – | |
| 4 | – | – | – | 235 | 170 | 145 | 180 | 130 | 110 | 190 | 175 | 160 | – | – | – | |
| 5 | – | – | – | 310 | 235 | 200 | 240 | 180 | 150 | 260 | 230 | 210 | – | – | – | |
| 6 | – | – | – | 205 | 160 | 130 | 160 | 120 | 100 | 160 | 135 | 110 | – | – | – | |
| M | 1 | – | – | – | 190 | 120 | 80 | 130 | 80 | 60 | 205 | 185 | 155 | – | – | – |
| 2 | – | – | – | 120 | 80 | 50 | 80 | 50 | 40 | 185 | 160 | 140 | – | – | – | |
| 3 | – | – | – | 125 | 80 | 55 | 85 | 50 | 40 | 145 | 130 | 115 | – | – | – | |
| K | 1 | 400 | 300 | 250 | 275 | 245 | 220 | 220 | 205 | 180 | 295 | 265 | 240 | 295 | 265 | 240 |
| 2 | 540 | 365 | 280 | 215 | 190 | 180 | 175 | 155 | 140 | 235 | 210 | 190 | 230 | 205 | 190 | |
| 3 | 310 | 190 | 155 | 180 | 160 | 145 | 155 | 145 | 125 | 195 | 175 | 160 | 195 | 175 | 160 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 50 | 35 | 30 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | 25 | 20 | 10 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | 70 | 40 | 30 | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | 60 | 30 | 25 | 66 | 50 | 33 | – | – | – | |
| H | 1 | 175 | 140 | 95 | – | – | – | – | – | – | – | – | – | 160 | 130 | 90 |
| 2 | 175 | 140 | 95 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 140 | 115 | 80 | – | – | – | – | – | – | – | – | – | – | – | – | |
Recommended Starting Speeds [SFM]
| Material Group | TN2505 | TN2510 | TN2525 | |||||||
| P | 1 | 1810 | 1380 | 1180 | 2165 | 1910 | 1770 | 1810 | 1380 | 1180 |
| 2 | 1045 | 785 | 670 | 1340 | 1220 | 1080 | 1045 | 785 | 670 | |
| 3 | 1045 | 785 | 670 | 1220 | 1080 | 1000 | 1045 | 785 | 670 | |
| 4 | – | – | – | 905 | 845 | 750 | – | – | – | |
| 5 | – | – | – | 1080 | 985 | 905 | – | – | – | |
| 6 | – | – | – | 750 | 670 | 570 | – | – | – | |
| M | 1 | – | – | – | 890 | 785 | 690 | – | – | – |
| 2 | – | – | – | 805 | 690 | 630 | – | – | – | |
| 3 | – | – | – | 630 | 570 | 490 | – | – | – | |
| K | 1 | 1320 | 985 | 830 | 1380 | 1180 | 985 | – | – | – |
| 2 | 1770 | 1200 | 925 | 1180 | 985 | 830 | – | – | – | |
| 3 | 1025 | 630 | 510 | 985 | 830 | 650 | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | |
| H | 1 | 570 | 450 | 310 | 475 | 360 | 230 | 430 | 295 | 200 |
| 2 | 570 | 450 | 310 | 475 | 360 | 230 | 430 | 295 | 200 | |
| 3 | 450 | 370 | 260 | 380 | 260 | 150 | – | – | – | |