言語

測定の単位

定価:

割引: %

定価:

$539.59 /各

価格::

数量

お問い合わせ

Downloads

Shell Mills • Inch

Name: Shell Mills • Inch
SKU: 5283522
Rating: 0 (0 reviews)

IC16 • Shell Mills

メートル

インチ

SAP Material Number	5283522
ISO Catalog Number	M200D250Z05S100RN16
ANSI Catalog Number	M200D250Z05S100RN16
[D] Adapter / Shank / Bore Diameter	25.4 mm
[D] Adapter / Shank / Bore Diameter	1 in
[D1] Effective Cutting Diameter	47.5 mm
[D1] Effective Cutting Diameter	1.87 in
[L] Overall Length	50.8 mm
[L] Overall Length	2 in
[D6] Hub Diameter	55.6 mm
[D6] Hub Diameter	2.189 in
[D1MAX] Maximum Cutting Diameter	63.5 mm
[D1MAX] Maximum Cutting Diameter	2.5 in
Weight Pounds	1.51
[AP1MAX] 1st Maximum Cutting Depth	3.97 mm
[AP1MAX] 1st Maximum Cutting Depth	.156 in
Coolant Supply	Y
Maximum Ramping Angle	0.39
Max RPM	22600
Number of Inserts	5

すべての改良品を表示

使用法と用途

ミーリング — 側面および正面
3Dプロファイル加工
側面加工／ショルダー加工：ボールノーズ
溝加工：スクエアエンド
フェイスミーリング
ポケット溝加工
ミーリング — スルークーラント

ワーク材料

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

H Hardened Materials

特徴と利点

Double-sided, 12 cutting edges.

Anti-rotation feature for better stability and higher feed rates.

Pocketing and profiling capabilities.

インサート選択の手引き

	Light Machining		General Purpose		Heavy Machining
Material Group	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	ML	WP25PM	MM	WP40PM	MM	WP40PM
P3–P4	ML	WP25PM	MM	WP25PM	MH	WP40PM
P5–P6	ML	WP35CM	MM	WP35CM	MH	WP35CM
M1–M2	ML	WP25PM	ML	WU35PM	MM	WU35PM
M3	ML	WP25PM	MM	WU35PM	MM	WU35PM
K1–K2	MH	WK15CM	MH	WK15CM	MH	WP20CM
K3	MH	WK15CM	MH	WP20CM	MH	WP35CM
N1–N2	ALP	WN25PM	ALP	WN25PM	ALP	WN25PM
N3	ALP	WN25PM	ALP	WN25PM	ALP	WN25PM
S1–S2	ML	WS30PM	ML	WS30PM	ML	WU35PM
S3	ML	WS30PM	ML	WU35PM	ML	WU35PM
S4	ML	WS30PM	ML	WU35PM	ML	WU35PM
H1	MH	WP25PM	MH	WP20CM	–	–

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
ALP	0,12	0,20	0,28	0,08	0,15	0,20	0,06	0,11	0,15	0,06	0,09	0,13	0,05	0,09	0,12	ALP
ML	0,12	0,37	0,48	0,09	0,27	0,35	0,07	0,20	0,26	0,06	0,17	0,23	0,05	0,16	0,21	ML
MM	0,28	0,70	0,81	0,21	0,50	0,58	0,15	0,38	0,44	0,13	0,33	0,38	0,12	0,30	0,35	MM
MH	0,53	0,70	1,17	0,38	0,50	0,84	0,29	0,38	0,63	0,25	0,33	0,55	0,23	0,30	0,50	MH

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
ALP	0,12	0,20	0,28	0,08	0,15	0,20	0,06	0,11	0,15	0,06	0,09	0,13	0,05	0,09	0,12	ALP
ML	0,14	0,43	0,56	0,10	0,31	0,40	0,08	0,23	0,30	0,07	0,20	0,26	0,06	0,18	0,24	ML
MM	0,33	0,81	0,94	0,24	0,58	0,67	0,18	0,43	0,50	0,16	0,38	0,44	0,14	0,35	0,40	MM
MH	0,62	0,81	1,36	0,44	0,58	0,97	0,33	0,43	0,72	0,29	0,38	0,63	0,27	0,35	0,58	MH

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
ALP	0,12	0,20	0,28	0,08	0,15	0,20	0,06	0,11	0,15	0,06	0,09	0,13	0,05	0,09	0,12	ALP
ML	0,26	0,77	1,01	0,19	0,55	0,73	0,14	0,41	0,54	0,12	0,36	0,47	0,11	0,33	0,43	ML
MM	0,59	1,46	1,70	0,43	1,04	1,21	0,32	0,78	0,90	0,28	0,68	0,79	0,25	0,62	0,72	MM
MH	1,11	1,46	2,48	0,80	1,04	1,75	0,60	0,78	1,30	0,52	0,68	1,13	0,48	0,62	1,03	MH

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
ALP	0,12	0,20	0,28	0,08	0,15	0,20	0,06	0,11	0,15	0,06	0,09	0,13	0,05	0,09	0,12	ALP
ML	0,19	0,56	0,73	0,14	0,40	0,53	0,10	0,30	0,40	0,09	0,26	0,34	0,08	0,24	0,32	ML
MM	0,43	1,06	1,24	0,31	0,76	0,89	0,23	0,57	0,66	0,20	0,50	0,57	0,19	0,45	0,53	MM
MH	0,81	1,06	1,79	0,58	0,76	1,28	0,44	0,57	0,95	0,38	0,50	0,83	0,35	0,45	0,76	MH

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
ALP	.005	.007	.009	.003	.005	.007	.003	.004	.005	.002	.003	.004	.002	.003	.004	ALP
ML	.005	.015	.019	.004	.011	.014	.003	.008	.010	.002	.007	.009	.002	.006	.008	ML
MM	.011	.027	.032	.008	.020	.023	.006	.015	.017	.005	.013	.015	.005	.012	.014	MM
MH	.021	.027	.046	.015	.020	.033	.011	.015	.025	.010	.013	.021	.009	.012	.020	MH

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
ALP	.005	.007	.009	.003	.005	.007	.003	.004	.005	.002	.003	.004	.002	.003	.004	ALP
ML	.006	.017	.022	.004	.012	.016	.003	.009	.012	.003	.008	.010	.002	.007	.010	ML
MM	.013	.032	.037	.009	.023	.026	.007	.017	.020	.006	.015	.017	.006	.014	.016	MM
MH	.024	.032	.053	.018	.023	.038	.013	.017	.029	.011	.015	.025	.010	.014	.023	MH

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
ALP	.005	.007	.009	.003	.005	.007	.003	.004	.005	.002	.003	.004	.002	.003	.004	ALP
ML	.010	.030	.040	.007	.022	.029	.005	.016	.021	.005	.014	.019	.004	.013	.017	ML
MM	.023	.058	.067	.017	.041	.047	.012	.031	.035	.011	.027	.031	.010	.024	.028	MM
MH	.044	.058	.098	.031	.041	.069	.023	.031	.051	.020	.027	.044	.019	.024	.041	MH

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
ALP	.005	.007	.009	.003	.005	.007	.003	.004	.005	.002	.003	.004	.002	.003	.004	ALP
ML	.007	.022	.029	.005	.016	.021	.004	.012	.016	.003	.010	.014	.003	.010	.012	ML
MM	.017	.042	.048	.012	.030	.035	.009	.022	.026	.008	.019	.022	.007	.018	.021	MM
MH	.032	.042	.071	.023	.030	.050	.017	.022	.037	.015	.019	.033	.014	.018	.030	MH

推奨切削速度の開始値［m/min］

Material Group

WK15CM

WK15PM

WN25PM

WP20CM

WP25PM

–

660

580

540

395

340

325

–

410

370

330

290

240

–

370

330

305

260

210

–

275

260

230

270

220

180

–

330

300

275

220

205

180

–

230

205

175

200

150

120

–

270

240

210

245

215

200

–

245

210

190

220

190

155

–

190

175

150

170

145

115

505

460

410

400

290

215

–

430

390

355

275

245

220

400

355

330

350

235

170

–

340

305

280

215

190

180

335

300

275

280

245

165

–

290

260

240

180

160

145

–

1290

1135

1050

–

1135

1050

910

–

1135

1050

910

–

170

140

115

145

110

–

Material Group		WP35CM			WP40PM			WS30PM			WS40PM			WU35PM
P	1	545	475	445	355	310	295	445	385	360	280	245	230	310	275	260
	2	335	305	275	300	260	215	365	325	265	235	205	170	265	230	190
	3	305	275	245	275	235	190	340	290	235	215	185	150	240	205	170
	4	230	210	190	245	205	160	300	245	200	195	160	130	215	180	145
	5	310	275	250	205	185	160	245	230	200	160	140	130	180	160	145
	6	190	160	130	180	140	110	220	170	130	140	110	85	155	120	95
M	1	245	220	185	235	205	185	270	240	220	260	190	115	205	180	160
	2	220	190	170	210	180	150	245	215	175	230	170	105	185	155	130
	3	175	155	140	155	140	110	185	160	125	190	140	80	140	120	95
K	1	355	320	290	–	–	–	–	–	–	–	–	–	–	–	–
	2	280	250	230	–	–	–	–	–	–	–	–	–	–	–	–
	3	235	210	190	–	–	–	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	1075	945	945	–	–	–
	2	–	–	–	–	–	–	–	–	–	945	875	845	–	–	–
	3	–	–	–	–	–	–	–	–	–	875	760	760	–	–	–
S	1	–	–	–	50	40	35	55	50	35	62	45	27	40	35	30
	2	–	–	–	50	40	35	55	50	35	55	40	26	40	35	30
	3	–	–	–	60	50	35	65	55	35	64	46	29	55	40	30
	4	80	60	40	80	60	40	100	70	50	90	66	42	70	55	35
H	1	–	–	–	–	–	–	160	120	90	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Recommended Starting Speeds [SFM]

Material Group		WK15CM			WN25PM			WP20CM			WP25PM			WP35CM			WP40PM			WS30PM			WU35PM
P	1	–	–	–	–	–	–	2165	1910	1770	1295	1120	1060	1790	1555	1460	1165	1025	965	1460	1260	1180	1025	905	845
	2	–	–	–	–	–	–	1340	1220	1080	1080	940	785	1105	1000	905	985	845	710	1200	1060	865	865	750	630
	3	–	–	–	–	–	–	1220	1080	1000	1000	845	690	1000	905	805	905	770	630	1120	940	770	785	670	550
	4	–	–	–	–	–	–	905	845	750	890	725	590	750	690	630	805	670	535	985	805	650	710	590	475
	5	–	–	–	–	–	–	1080	985	905	725	670	590	1025	905	830	670	610	535	805	750	650	590	535	475
	6	–	–	–	–	–	–	750	670	570	650	490	395	630	535	430	590	450	355	725	550	430	510	395	310
M	1	–	–	–	–	–	–	890	785	690	805	710	650	805	725	610	770	670	610	890	785	725	670	590	535
	2	–	–	–	–	–	–	805	690	630	725	630	510	725	630	550	690	590	490	805	710	570	610	510	430
	3	–	–	–	–	–	–	630	570	490	550	475	370	570	510	450	510	450	355	610	535	415	450	395	310
K	1	1655	1520	1340	–	–	–	1415	1280	1165	905	805	725	1165	1045	940	–	–	–	–	–	–	–	–	–
	2	1320	1165	1080	–	–	–	1120	1000	925	710	630	590	925	830	750	–	–	–	–	–	–	–	–	–
	3	1105	985	905	–	–	–	940	845	785	590	535	475	770	690	630	–	–	–	–	–	–	–	–	–
N	1	–	–	–	4230	3720	3445	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	3720	3445	2995	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	3720	3445	2995	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	–	–	–	155	140	95	–	–	–	155	140	120	180	155	120	140	120	95
	2	–	–	–	–	–	–	–	–	–	155	140	95	–	–	–	155	140	120	180	155	120	140	120	95
	3	–	–	–	–	–	–	–	–	–	200	155	95	–	–	–	200	155	120	215	180	120	180	140	95
	4	–	–	–	–	–	–	–	–	–	275	200	140	260	200	130	260	200	140	335	235	155	235	180	120
H	1	–	–	–	–	–	–	550	450	370	475	355	275	–	–	–	–	–	–	535	395	295	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

スペア部品 for Shell Mills • Inch

Spare Part ANTI-SEIZE LUBRICANT

SHCS W/COOLANT GROOVE

Insert Screw M4.5 X 0,75 X 14 LG

170.026

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO製品型番	材種

ようこそ

設定をご確認ください

設定の更新

提案製品

Product Family suggestions

専門家とのチャット

メッセージを送信する

専門家とのチャット

メッセージを送信する

ソリューション編集

ソリューション追加