New Customer
Are you new to Widia? Create an account and get started.
アカウントの作成Registered Customer
Already have an account? Sign in.
サインインSelected Account
There is an issue with your account. Please Contact Customer Service.
Sold-to
Change Account
Ship To Account
Change Account
New Customer
Are you new to Widia? Create an account and get started.
アカウントの作成Registered Customer
Already have an account? Sign in.
サインインSelected Account
There is an issue with your account. Please Contact Customer Service.
Sold-to
Change Account
Ship To Account
Change Account
がカートに正常に追加されました
カートを表示
カートを表示
通知
すべて既読にする
VSM490™-10 • Weldon® End Mills • Inch
Weldon® End Mills • Inch
メートル
インチ
| SAP Material Number | 6425474 |
| ISO Catalog Number | VSM490D100Z04W100XN10 |
| ANSI Catalog Number | VSM490D100Z04W100XN10 |
| [D1] Effective Cutting Diameter | 25.4000 mm |
| [D1] Effective Cutting Diameter | 1.000 in |
| [D] Adapter / Shank / Bore Diameter | 25.4 mm |
| [D] Adapter / Shank / Bore Diameter | 1.0 in |
| [L] Overall Length | 95.2500 mm |
| [L] Overall Length | 3.750 in |
| [L2] Head Length | 37.3400 mm |
| [L2] Head Length | 1.470 in |
| [AP1MAX] 1st Maximum Cutting Depth | 10.0000 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .3940 in |
| Number of Inserts | 4 |
| Max RPM | 33900 |
| Coolant Supply | Y |
| Weight Pounds | 0.71 |
使用法と用途
フェイスミーリング
溝加工：スクエアエンド
側面加工／ショルダー加工：スクエアエンド
シャンク — ストレートWeldon
ミーリング — スルークーラント
ワーク材料
P
Steel
M
Stainless Steel
K
Cast Iron
N
Non-Ferrous
S
High-Temp Alloys
H
Hardened Materials
特徴と利点
- True 0° roughing tool with imbedded finishing capability all in one tool.
- Best-in-class wall finish at axial stepping-down jobs.
- Lower cutting forces and real soft cutting action.
- Perfect fit for taper 40 spindles and driven units.
- Reduced shanks available.
インサート選択の手引き
| Obróbka lekka | Obróbka średnia | Obróbka ciężka | ||||
| Grupa materiałowa | Geometria | Gatunek | Geometria | Gatunek | Geometria | Gatunek |
| P1–P2 | XNGU-ML | WP40PM | XNPU-MM | WP40PM | XNPU-MM | WP40PM |
| P3–P4 | XNGU-ML | WP40PM | XNPU-MM | WP40PM | XNPU-MM | WP40PM |
| P5–P6 | XNGU-MM | WP25PM | XNPU-MM | WP35CM | XNPU-MM | WP40PM |
| M1–M2 | XNGU-ML | WS40PM | XNGU-ML | WS40PM | XNPU-MM | WS40PM |
| M3 | XNGU-ML | WS40PM | XNGU-ML | WS40PM | XNPU-MM | WS40PM |
| K1–K2 | XNPU-ML | WK15PM | XNGU-MH | WK15CM | XNGU-MH | WK15CM |
| K3 | XNPU-MM | WK15PM | XNGU-MH | WP35CM | XNGU-MH | WP35CM |
| N1–N2 | XNGU-ALP | WN25PM | XNGU-ALP | WN25PM | XNGU-ALP | WN25PM |
| N3 | XNGU-ALP | WN25PM | XNGU-ALP | WN25PM | XNGU-ALP | WN25PM |
| S1–S2 | XNGU-ML | WP25PM | XNGU-ML | WS40PM | XNPU-MM | WS40PM |
| S3 | XNGU-ML | WS40PM | XNGU-ML | WS40PM | XNPU-MM | WS40PM |
| S4 | XNGU-ML | WS40PM | XNGU-ML | WS40PM | XNPU-MM | WS40PM |
| H1 | XNGU-ML | WU10PM | XNGU-MM | WU10PM | – | – |
推奨フィード量の開始値［mm］
| Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae) | ||||||||||||||||
| Geometria płytki | 5% | 10% | 20% | 30% | 40–100% | Geometria płytki | ||||||||||
| .E..ALP | 0,12 | 0,23 | 0,32 | 0,08 | 0,17 | 0,23 | 0,06 | 0,13 | 0,18 | 0,06 | 0,11 | 0,15 | 0,05 | 0,10 | 0,14 | .E..ALP |
| .E..ML | 0,18 | 0,28 | 0,37 | 0,13 | 0,20 | 0,27 | 0,10 | 0,15 | 0,20 | 0,09 | 0,13 | 0,17 | 0,08 | 0,12 | 0,16 | .E..ML |
| .S..MM | 0,23 | 0,35 | 0,46 | 0,17 | 0,25 | 0,33 | 0,13 | 0,19 | 0,25 | 0,11 | 0,17 | 0,22 | 0,10 | 0,15 | 0,20 | .S..MM |
| .S..MH | 0,23 | 0,43 | 0,58 | 0,17 | 0,31 | 0,42 | 0,13 | 0,23 | 0,31 | 0,11 | 0,20 | 0,27 | 0,10 | 0,18 | 0,25 | .S..MH |
| Obróbka lekka | Obróbka średnia | Obróbka ciężka |
Recommended Starting Feeds [IPT]
| Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae) | ||||||||||||||||
| Geometria płytki | 5% | 10% | 20% | 30% | 40–100% | Geometria płytki | ||||||||||
| .E..ALP | .005 | .009 | .013 | .003 | .007 | .009 | .003 | .005 | .007 | .002 | .004 | .006 | .002 | .004 | .006 | .E..ALP |
| .E..ML | .007 | .011 | .015 | .005 | .008 | .011 | .004 | .006 | .008 | .003 | .005 | .007 | .003 | .005 | .006 | .E..ML |
| .S..MM | .009 | .014 | .018 | .007 | .010 | .013 | .005 | .007 | .010 | .004 | .006 | .008 | .004 | .006 | .008 | .S..MM |
| .S..MH | .009 | .016 | .022 | .007 | .012 | .016 | .005 | .009 | .012 | .004 | .008 | .010 | .004 | .007 | .010 | .S..MH |
| Obróbka lekka | Obróbka średnia | Obróbka ciężka |
推奨切削速度の開始値［m/min］*
| Grupa materiałowa | WK15CM | WK15PM | WN25PM | WP25PM | WP35CM | WP40PM | WS40PM | WU10PM | |||||||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | 330 | 285 | 270 | 455 | 395 | 370 | 295 | 260 | 245 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 275 | 240 | 200 | 280 | 255 | 230 | 250 | 215 | 180 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 255 | 215 | 175 | 255 | 230 | 205 | 230 | 195 | 160 | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 225 | 185 | 150 | 190 | 175 | 160 | 205 | 170 | 135 | – | – | – | – | – | – | |
| 5 | – | – | – | – | – | – | – | – | – | 185 | 170 | 150 | 260 | 230 | 210 | 170 | 155 | 135 | 170 | 145 | 120 | – | – | – | |
| 6 | – | – | – | – | – | – | – | – | – | 165 | 125 | 100 | 160 | 135 | 110 | 150 | 115 | 90 | 150 | 110 | 80 | – | – | – | |
| M | 1 | – | – | – | – | – | – | – | – | – | 205 | 180 | 165 | 205 | 185 | 155 | 195 | 170 | 155 | 210 | 170 | 140 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 185 | 160 | 130 | 185 | 160 | 140 | 175 | 150 | 125 | 180 | 145 | 120 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 140 | 120 | 95 | 145 | 130 | 115 | 130 | 115 | 90 | 145 | 110 | 85 | – | – | – | |
| K | 1 | 420 | 385 | 340 | 270 | 245 | 215 | – | – | – | 230 | 205 | 185 | 295 | 265 | 240 | – | – | – | – | – | – | 295 | 265 | 240 |
| 2 | 335 | 295 | 275 | 210 | 190 | 175 | – | – | – | 180 | 160 | 150 | 235 | 210 | 190 | – | – | – | – | – | – | 230 | 205 | 190 | |
| 3 | 280 | 250 | 230 | 175 | 160 | 145 | – | – | – | 150 | 135 | 120 | 195 | 175 | 160 | – | – | – | – | – | – | 195 | 175 | 160 | |
| N | 1 | – | – | – | – | – | – | 1075 | 945 | 875 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | 945 | 875 | 760 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | 945 | 875 | 760 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 40 | 35 | 25 | – | – | – | – | – | – | 40 | 35 | 25 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 40 | 35 | 25 | – | – | – | – | – | – | 40 | 35 | 25 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 50 | 40 | 25 | – | – | – | – | – | – | 50 | 40 | 25 | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 70 | 50 | 35 | – | – | – | – | – | – | 60 | 50 | 30 | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 160 | 130 | 90 |
Recommended Starting Speeds [SFM]*
| Grupa materiałowa | WK15CM | WK15PM | WN25PM | WP25PM | WP35CM | WP40PM | WS40PM | WU10PM | |||||||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | 1085 | 935 | 885 | 1495 | 1295 | 1215 | 970 | 855 | 805 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 900 | 785 | 655 | 920 | 835 | 755 | 820 | 705 | 590 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 835 | 705 | 575 | 835 | 755 | 675 | 755 | 640 | 525 | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 740 | 605 | 490 | 625 | 575 | 525 | 675 | 560 | 445 | – | – | – | – | – | – | |
| 5 | – | – | – | – | – | – | – | – | – | 605 | 560 | 490 | 855 | 755 | 690 | 560 | 510 | 445 | 560 | 475 | 395 | – | – | – | |
| 6 | – | – | – | – | – | – | – | – | – | 540 | 410 | 330 | 525 | 445 | 360 | 490 | 375 | 295 | 490 | 360 | 260 | – | – | – | |
| M | 1 | – | – | – | – | – | – | – | – | – | 675 | 590 | 540 | 675 | 605 | 510 | 640 | 560 | 510 | 690 | 560 | 460 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 605 | 525 | 425 | 605 | 525 | 460 | 575 | 490 | 410 | 590 | 475 | 395 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 460 | 395 | 310 | 475 | 425 | 375 | 425 | 375 | 295 | 475 | 360 | 280 | – | – | – | |
| K | 1 | 1380 | 1265 | 1115 | 885 | 805 | 705 | – | – | – | 755 | 675 | 605 | 970 | 870 | 785 | – | – | – | – | – | – | 970 | 870 | 785 |
| 2 | 1100 | 970 | 900 | 690 | 625 | 575 | – | – | – | 590 | 525 | 490 | 770 | 690 | 625 | – | – | – | – | – | – | 755 | 675 | 625 | |
| 3 | 920 | 820 | 755 | 575 | 525 | 475 | – | – | – | 490 | 445 | 395 | 640 | 575 | 525 | – | – | – | – | – | – | 640 | 575 | 525 | |
| N | 1 | – | – | – | – | – | – | 3525 | 3100 | 2870 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | 3100 | 2870 | 2495 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | 3100 | 2870 | 2495 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 130 | 115 | 80 | – | – | – | 130 | 115 | 100 | 130 | 115 | 80 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 130 | 115 | 80 | – | – | – | 130 | 115 | 100 | 130 | 115 | 80 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 165 | 130 | 80 | – | – | – | 165 | 130 | 100 | 165 | 130 | 80 | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 230 | 165 | 115 | – | – | – | 215 | 165 | 115 | 195 | 165 | 100 | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 525 | 425 | 295 |
スペア部品 for VSM490™-10 • Weldon® End Mills • Inch
Spare Part
TORXPLUS-9 INSERT SCREW M3x0.5
TORXPLUS-9 INSERT SCREW M3x0.5
Spare Part
Hardware CHAVE TORX DT-9IP
Hardware CHAVE TORX DT-9IP
Spare Part
Spare Part ANTI-SEIZE LUBRICANT
Spare Part ANTI-SEIZE LUBRICANT