提案製品

Product Family suggestions

がカートに正常に追加されました
カートを表示

通知

すべて既読にする
Mobile Menu

H/P超硬ソリッド • 仕上げ加工

フィルタを選択
Filters
フィルタ
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (295)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (295)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (295)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (295)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (276)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (211)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (174)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (174)
  • M Stainless Steel (293)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (293)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (211)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (174)
  • K Cast Iron (293)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (293)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (211)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (174)
  • N Non-Ferrous Materials (37)
    • N1
      Wrought Aluminum
      (37)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (37)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (27)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (27)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (37)
    • N6
      Carbon, Graphite Composites, CFRP
      (37)
  • S High-Temp Alloys (174)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (174)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (174)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (174)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (174)
  • H Hardened Materials (178)
    • H1
      Hardened Materials 44-48 HRC
      (178)
    • H2
      Hardened Materials 48-55 HRC
      (13)
Select All Star
  • CN (9)
  • DE (18)
  • GB (11)
  • SG (6)
  • US (32)
Applications
Applications
  • Pocket Pocket (221)
  • Pocket Helical Pocket Helical (242)
  • Pocket Milling Pocket Milling (234)
  • Pocket Plunge Milling Pocket Plunge Milling (13)
  • Profile Milling Profile Milling (24)
  • Ramping Ramping (215)
  • Shoulder Ball Nose Shoulder Ball Nose (37)
  • Shoulder Milling Shoulder Milling (274)
  • Shoulder Roughing Shoulder Roughing (29)
  • Shoulder Square End Shoulder Square End (261)
  • Slot Ball Nose Slot Ball Nose (37)
  • Slot Milling Slot Milling (205)
  • Slot Square End Slot Square End (184)
Cutting Diameter
Cutting Diameter
  • 0.039 in (3)
  • 0.06 in (3)
  • 0.079 in (8)
  • 0.098 in (3)
  • 0.119 in (17)
  • 0.125 in (8)
  • 0.138 in (2)
  • 0.157 in (20)
  • 0.177 in (1)
  • 0.188 in (10)
  • 0.197 in (17)
  • 0.237 in (27)
  • 0.25 in (30)
  • 0.276 in (3)
  • 0.313 in (23)
  • 0.315 in (28)
  • 0.354 in (1)
  • 0.375 in (30)
  • 0.394 in (25)
  • 0.438 in (10)
  • 0.473 in (27)
  • 0.5 in (46)
  • 0.551 in (22)
  • 0.625 in (37)
  • 0.63 in (25)
  • 0.709 in (18)
  • 0.75 in (42)
  • 0.787 in (24)
  • 0.984 in (1)
  • 1.0 in (29)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 1.0 mm (3)
  • 1.5 mm (3)
  • 2.0 mm (8)
  • 2.5 mm (3)
  • 3.0 mm (17)
  • 3.176 mm (8)
  • 3.5 mm (2)
  • 4.0 mm (20)
  • 4.5 mm (1)
  • 4.775 mm (10)
  • 5.0 mm (17)
  • 6.0 mm (27)
  • 6.351 mm (30)
  • 7.0 mm (3)
  • 7.95 mm (23)
  • 8.0 mm (28)
  • 9.0 mm (1)
  • 9.525 mm (30)
  • 10.0 mm (25)
  • 11.125 mm (10)
  • 12.0 mm (27)
  • 12.701 mm (46)
  • 14.0 mm (22)
  • 15.875 mm (37)
  • 16.0 mm (25)
  • 18.0 mm (18)
  • 19.05 mm (42)
  • 20.0 mm (24)
  • 25.0 mm (1)
  • 25.401 mm (29)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 3.0 mm (14)
  • 4.0 mm (9)
  • 5.0 mm (9)
  • 6.0 mm (7)
  • 6.351 mm (2)
  • 7.0 mm (13)
  • 7.95 mm (2)
  • 8.0 mm (9)
  • 9.0 mm (8)
  • 9.5 mm (3)
  • 9.525 mm (4)
  • 10.0 mm (12)
  • 11.0 mm (10)
  • 11.125 mm (5)
  • 12.0 mm (17)
  • 12.701 mm (20)
  • 13.0 mm (10)
  • 14.0 mm (15)
  • 14.3 mm (2)
  • 15.875 mm (17)
  • 16.0 mm (18)
  • 18.0 mm (9)
  • 19.0 mm (12)
  • 19.05 mm (23)
  • 20.0 mm (10)
  • 20.651 mm (11)
  • 22.0 mm (22)
  • 22.225 mm (23)
  • 24.0 mm (4)
  • 25.0 mm (4)
  • 25.401 mm (22)
  • 26.0 mm (24)
  • 28.576 mm (9)
  • 31.75 mm (30)
  • 32.0 mm (22)
  • 38.0 mm (13)
  • 38.1 mm (34)
  • 45.0 mm (1)
  • 50.801 mm (13)
  • 57.151 mm (31)
  • 76.2 mm (11)
  • 101.601 mm (6)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.119 in (14)
  • 0.157 in (9)
  • 0.197 in (9)
  • 0.237 in (7)
  • 0.25 in (2)
  • 0.276 in (13)
  • 0.313 in (2)
  • 0.315 in (9)
  • 0.354 in (8)
  • 0.374 in (3)
  • 0.375 in (4)
  • 0.394 in (12)
  • 0.433 in (10)
  • 0.438 in (5)
  • 0.473 in (17)
  • 0.5 in (20)
  • 0.512 in (10)
  • 0.551 in (15)
  • 0.564 in (2)
  • 0.625 in (17)
  • 0.63 in (18)
  • 0.709 in (9)
  • 0.748 in (12)
  • 0.75 in (23)
  • 0.787 in (10)
  • 0.814 in (11)
  • 0.866 in (22)
  • 0.875 in (23)
  • 0.946 in (4)
  • 0.984 in (4)
  • 1.0 in (22)
  • 1.024 in (24)
  • 1.125 in (9)
  • 1.25 in (30)
  • 1.26 in (22)
  • 1.496 in (13)
  • 1.5 in (34)
  • 1.772 in (1)
  • 2.0 in (13)
  • 2.25 in (31)
  • 3.0 in (11)
  • 4.0 in (6)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.119 in (12)
  • 0.157 in (5)
  • 0.197 in (5)
  • 0.237 in (4)
  • 0.276 in (6)
  • 0.313 in (2)
  • 0.315 in (4)
  • 0.354 in (4)
  • 0.374 in (3)
  • 0.375 in (4)
  • 0.394 in (8)
  • 0.433 in (6)
  • 0.438 in (5)
  • 0.473 in (12)
  • 0.5 in (19)
  • 0.512 in (9)
  • 0.551 in (10)
  • 0.564 in (2)
  • 0.625 in (16)
  • 0.63 in (10)
  • 0.709 in (3)
  • 0.748 in (9)
  • 0.75 in (20)
  • 0.787 in (3)
  • 0.814 in (11)
  • 0.866 in (15)
  • 0.875 in (21)
  • 0.946 in (4)
  • 0.984 in (1)
  • 1.0 in (18)
  • 1.024 in (20)
  • 1.125 in (9)
  • 1.25 in (27)
  • 1.26 in (12)
  • 1.379 in (3)
  • 1.496 in (6)
  • 1.5 in (28)
  • 1.575 in (6)
  • 1.772 in (1)
  • 1.969 in (3)
  • 2.0 in (10)
  • 2.244 in (3)
  • 2.25 in (24)
  • 2.362 in (6)
  • 3.0 in (11)
  • 4.0 in (6)
Reach Min to Reach Max
Reach
Reach
  • 3.0 mm (12)
  • 4.0 mm (5)
  • 5.0 mm (5)
  • 6.0 mm (4)
  • 7.0 mm (6)
  • 7.95 mm (2)
  • 8.0 mm (4)
  • 9.0 mm (4)
  • 9.5 mm (3)
  • 9.525 mm (4)
  • 10.0 mm (8)
  • 11.0 mm (6)
  • 11.125 mm (5)
  • 12.0 mm (12)
  • 12.701 mm (19)
  • 13.0 mm (9)
  • 14.0 mm (10)
  • 14.3 mm (2)
  • 15.875 mm (16)
  • 16.0 mm (10)
  • 18.0 mm (3)
  • 19.0 mm (9)
  • 19.05 mm (20)
  • 20.0 mm (3)
  • 20.651 mm (11)
  • 22.0 mm (15)
  • 22.225 mm (21)
  • 24.0 mm (4)
  • 25.0 mm (1)
  • 25.401 mm (18)
  • 26.0 mm (20)
  • 28.576 mm (9)
  • 31.75 mm (27)
  • 32.0 mm (12)
  • 35.0 mm (3)
  • 38.0 mm (6)
  • 38.1 mm (28)
  • 40.0 mm (6)
  • 45.0 mm (1)
  • 50.0 mm (3)
  • 50.801 mm (10)
  • 57.0 mm (3)
  • 57.151 mm (24)
  • 60.0 mm (6)
  • 76.2 mm (11)
  • 101.601 mm (6)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (417)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Straight-Cylindrical (342)
  • Weldon (198)
Number of Flutes
Number of Flutes
  • 10 (6)
  • 2 (37)
  • 3 (204)
  • 4 (5)
  • 5 (85)
  • 6 (176)
  • 8 (27)
cornerConfiguration
Corner Style
Corner Style
  • BALL NOSE (37)
  • CHAMFER (8)
  • RADIUS (60)
  • SQUARE END (331)
Corner Radius
Corner Radius
  • 0.0 in (416)
  • 0.01 in (16)
  • 0.019 in (47)
  • 0.02 in (2)
  • 0.03 in (26)
  • 0.039 in (2)
  • 0.06 in (3)
  • 0.079 in (3)
  • 0.098 in (2)
  • 0.119 in (3)
  • 0.157 in (3)
  • 0.197 in (3)
  • 0.237 in (3)
  • 0.276 in (3)
  • 0.315 in (3)
  • 0.354 in (3)
  • 0.394 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (416)
  • 0.25 mm (16)
  • 0.45 mm (47)
  • 0.5 mm (2)
  • 0.75 mm (26)
  • 1.0 mm (2)
  • 1.5 mm (3)
  • 2.0 mm (3)
  • 2.5 mm (2)
  • 3.0 mm (3)
  • 4.0 mm (3)
  • 5.0 mm (3)
  • 6.0 mm (3)
  • 7.0 mm (3)
  • 8.0 mm (3)
  • 9.0 mm (3)
  • 10.0 mm (2)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (532)
  • 0.1 mm (5)
  • 0.2 mm (1)
  • 0.301 mm (2)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (532)
  • 0.004 in (5)
  • 0.008 in (1)
  • 0.012 in (2)
Corner Chamfer Min to Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TIALN (36)
  • TIALN-LW (11)
  • TIALN-RJ (14)
  • TIALN-RT (59)
  • TIALN-RW (22)
  • TICN-CT (70)
  • TICN-CW (39)
  • UNCOATED (98)
  • UNCOATEDJJ (4)
  • UNCOATEDWW (18)
  • WP15PE (99)
Rough Finish
Rough Finish
  • F (511)
  • FR (29)
frontEnd
Neck Diameter
Neck Diameter
  • 0.217 in (2)
  • 0.222 in (1)
  • 0.295 in (2)
  • 0.296 in (1)
  • 0.37 in (1)
  • 0.374 in (2)
  • 0.444 in (1)
  • 0.453 in (2)
  • 0.518 in (1)
  • 0.531 in (2)
  • 0.593 in (1)
  • 0.61 in (2)
  • 0.666 in (1)
  • 0.768 in (2)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 5.5 mm (2)
  • 5.65 mm (1)
  • 7.5 mm (2)
  • 7.525 mm (1)
  • 9.4 mm (1)
  • 9.5 mm (2)
  • 11.275 mm (1)
  • 11.5 mm (2)
  • 13.15 mm (1)
  • 13.5 mm (2)
  • 15.05 mm (1)
  • 15.5 mm (2)
  • 16.925 mm (1)
  • 19.5 mm (2)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
backEnd
Back-End Diameter
Back-End Diameter
  • 3.176 mm (8)
  • 4.0 mm (11)
  • 4.775 mm (10)
  • 6.0 mm (90)
  • 6.351 mm (30)
  • 7.95 mm (23)
  • 8.0 mm (31)
  • 9.525 mm (30)
  • 10.0 mm (26)
  • 11.125 mm (10)
  • 12.0 mm (27)
  • 12.701 mm (46)
  • 14.0 mm (22)
  • 15.875 mm (37)
  • 16.0 mm (27)
  • 18.0 mm (16)
  • 19.05 mm (42)
  • 20.0 mm (24)
  • 25.0 mm (1)
  • 25.401 mm (29)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.125 in (8)
  • 0.157 in (11)
  • 0.188 in (10)
  • 0.237 in (90)
  • 0.25 in (30)
  • 0.313 in (23)
  • 0.315 in (31)
  • 0.375 in (30)
  • 0.394 in (26)
  • 0.438 in (10)
  • 0.473 in (27)
  • 0.5 in (46)
  • 0.551 in (22)
  • 0.625 in (37)
  • 0.63 in (27)
  • 0.709 in (16)
  • 0.75 in (42)
  • 0.787 in (24)
  • 0.984 in (1)
  • 1.0 in (29)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

仕上げ加工工具 • D503およびD513シリーズ • スクエアエンド • メトリック 仕上げ加工工具 • D503およびD513シリーズ • スクエアエンド • メトリック

D503およびD513シリーズ • メトリック
(83 Products)
  • 3857138571
  • ねじれ角： 45°ねじれ角： 45°
  • コーナーのタイプ：スクエアエンドコーナーのタイプ：スクエアエンド
  • 3855138551
  • 溝加工：スクエアエンド溝加工：スクエアエンド
  • ランピング加工：ブランクランピング加工：ブランク
  • 側面加工／ショルダー加工：スクエアエンド側面加工／ショルダー加工：スクエアエンド
  • シャンク — ストレートWeldonシャンク — ストレートWeldon
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Z] Number of Flutes
1661573 D50302002CW D50302002CW TICN-CW   Weldon 2.0000 .0790 6.0 .2362 3.0000 .1180 50.0000 1.969 3
    この品目はありません
    この品目は、代理店経由で入手できる場合があります
    価格::
    1661576 D50302002WW D50302002WW UNCOATEDWW   Weldon 2.0000 .0790 6.0 .2362 3.0000 .1180 50.0000 1.969 3
      この品目はありません
      この品目は、代理店経由で入手できる場合があります
      価格::
      1661577 D50303002CW D50303002CW TICN-CW   Weldon 3.0000 .1180 6.0 .2362 4.0000 .1570 50.0000 1.969 3
        定価:
        $56.86 /各
        価格::
        1661580 D50303002WW D50303002WW UNCOATED   Weldon 3.0000 .1180 6.0 .2362 4.0000 .1570 50.0000 1.969 3
          定価:
          $42.18 /各
          価格::
          1661582 D50304002CW D50304002CW TICN-CW   Weldon 4.0000 .1570 6.0 .2362 5.0000 .1970 54.0000 2.126 3
            定価:
            $52.34 /各
            価格::
            1661680 D51303002RW D513030S2W TIALN   Weldon 3.0000 .1180 6.0 .2362 7.0000 .2760 57.0000 2.244 3
              定価:
              $49.16 /各
              価格::
              定価:
              割引: %
              価格::
              配置転換 この品目はありません
              交換品 この品目は、代理店経由で入手できる場合があります

              オリジナル製品

              仕上げ加工工具 • D507およびD517シリーズ • シャープな刃先 • メトリック 仕上げ加工工具 • D507およびD517シリーズ • シャープな刃先 • メトリック

              D507およびD517シリーズ • メトリック
              (19 Products)
              • 工具寸法：フルートの構造： 6 工具寸法：フルートの構造： 6
              • ねじれ角： 45°ねじれ角： 45°
              • コーナーのタイプ：スクエアエンドコーナーのタイプ：スクエアエンド
              • 3855138551
              • 側面加工／ショルダー加工：スクエアエンド側面加工／ショルダー加工：スクエアエンド
              • シャンク — ストレートWeldonシャンク — ストレートWeldon
              製品を表示
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Z] Number of Flutes
              5559100 D50706002W D50706002W WP15PE   Weldon 6.0000 .2362 6.0 .2362 10.0000 .3937 54.0000 2.126 6
                定価:
                $55.70 /各
                価格::
                5559101 D50708003W D50708003W WP15PE   Weldon 8.0000 .3150 8.0 .315 12.0000 .4724 58.0000 2.283 6
                  定価:
                  $69.62 /各
                  価格::
                  5559102 D50710004W D50710004W WP15PE   Weldon 10.0000 .3937 10.0 .3937 14.0000 .5512 66.0000 2.598 6
                    定価:
                    $99.34 /各
                    価格::
                    5559108 D51706002W D51706002W WP15PE   Weldon 6.0000 .2362 6.0 .2362 13.0000 .5118 57.0000 2.244 6
                      定価:
                      $46.94 /各
                      価格::
                      5559109 D51708003W D51708003W WP15PE   Weldon 8.0000 .3150 8.0 .315 19.0000 .7480 63.0000 2.480 6
                        定価:
                        $58.91 /各
                        価格::
                        5559110 D51710004W D51710004W WP15PE   Weldon 10.0000 .3937 10.0 .3937 22.0000 .8661 72.0000 2.834 6
                          定価:
                          $83.76 /各
                          価格::
                          定価:
                          割引: %
                          価格::
                          配置転換 この品目はありません
                          交換品 この品目は、代理店経由で入手できる場合があります

                          オリジナル製品

                          Finishers • Series 4S05 4S07 • Sharp Edge • Inch Finishers • Series 4S05 4S07 • Sharp Edge • Inch

                          Series 4S05 4S07 • Lists 4S05 4S07 4S17 4S27 4S47 4S67
                          (85 Products)
                          • 工具寸法：フルートの構造：X （可変）工具寸法：フルートの構造：X （可変）
                          • ねじれ角： 45°ねじれ角： 45°
                          • コーナーのタイプ：スクエアエンドコーナーのタイプ：スクエアエンド
                          • ランピング加工：ブランクランピング加工：ブランク
                          • 側面加工／ショルダー加工：スクエアエンド側面加工／ショルダー加工：スクエアエンド
                          製品を表示
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [L3] Usable Length [L3] Usable Length [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length
                          2841587 TC4S0719007 TC4S0719007 TICN-CT   Straight-Cylindrical