通知

すべて既読にする

GT Series

フィルタを選択
Filters
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (231)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (163)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (178)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (178)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (92)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (53)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (92)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (53)
  • M Stainless Steel (214)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (178)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (107)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (143)
  • K Cast Iron (54)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (54)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (54)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (19)
  • N Non-Ferrous Materials (174)
    • N1
      Wrought Aluminum
      (120)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (174)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (43)
  • S High-Temp Alloys (310)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (92)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (135)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (135)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (83)
  • H Hardened Materials (10)
    • H1
      Hardened Materials 44-48 HRC
      (10)
    • H2
      Hardened Materials 48-55 HRC
      (10)
Select All Star
  • US (129)
Applications
Applications
  • Tapping Blind Hole Tapping Blind Hole (380)
  • Tapping Through Hole Tapping Through Hole (334)
  • Threading Threading (740)
Cutting Length
Cutting Length
  • 6.0 mm (4)
  • 7.0 mm (4)
  • 7.9 mm (18)
  • 8.0 mm (20)
  • 8.1 mm (8)
  • 9.0 mm (6)
  • 9.1 mm (17)
  • 10.0 mm (66)
  • 10.5 mm (1)
  • 10.9 mm (2)
  • 11.0 mm (10)
  • 11.101 mm (29)
  • 11.201 mm (8)
  • 11.601 mm (10)
  • 11.8 mm (8)
  • 11.9 mm (4)
  • 12.0 mm (40)
  • 12.101 mm (11)
  • 12.201 mm (3)
  • 12.4 mm (28)
  • 12.701 mm (4)
  • 13.0 mm (28)
  • 13.101 mm (4)
  • 13.4 mm (9)
  • 14.0 mm (17)
  • 14.201 mm (14)
  • 14.9 mm (1)
  • 15.0 mm (69)
  • 15.101 mm (25)
  • 15.201 mm (10)
  • 16.0 mm (33)
  • 17.0 mm (7)
  • 18.0 mm (49)
  • 19.0 mm (5)
  • 19.6 mm (31)
  • 20.0 mm (33)
  • 21.0 mm (7)
  • 21.1 mm (3)
  • 22.0 mm (19)
  • 23.0 mm (6)
  • 23.1 mm (15)
  • 24.0 mm (5)
  • 25.0 mm (9)
  • 25.401 mm (14)
  • 26.0 mm (3)
  • 27.0 mm (5)
  • 30.0 mm (6)
  • 31.8 mm (4)
  • 32.0 mm (3)
  • 33.301 mm (1)
  • 35.0 mm (2)
  • 40.0 mm (1)
  • 40.401 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.237 in (4)
  • 0.276 in (4)
  • 0.311 in (18)
  • 0.315 in (20)
  • 0.319 in (8)
  • 0.354 in (6)
  • 0.358 in (17)
  • 0.394 in (66)
  • 0.414 in (1)
  • 0.429 in (2)
  • 0.433 in (10)
  • 0.437 in (29)
  • 0.441 in (8)
  • 0.457 in (10)
  • 0.465 in (8)
  • 0.47 in (4)
  • 0.473 in (40)
  • 0.477 in (11)
  • 0.48 in (3)
  • 0.488 in (28)
  • 0.5 in (4)
  • 0.512 in (28)
  • 0.516 in (4)
  • 0.528 in (9)
  • 0.551 in (17)
  • 0.559 in (14)
  • 0.587 in (1)
  • 0.591 in (69)
  • 0.595 in (25)
  • 0.598 in (10)
  • 0.63 in (33)
  • 0.669 in (7)
  • 0.709 in (49)
  • 0.748 in (5)
  • 0.772 in (31)
  • 0.787 in (33)
  • 0.828 in (7)
  • 0.832 in (3)
  • 0.866 in (19)
  • 0.906 in (6)
  • 0.909 in (15)
  • 0.946 in (5)
  • 0.984 in (9)
  • 1.0 in (14)
  • 1.024 in (3)
  • 1.063 in (5)
  • 1.181 in (6)
  • 1.252 in (4)
  • 1.26 in (3)
  • 1.311 in (1)
  • 1.379 in (2)
  • 1.575 in (1)
  • 1.591 in (1)
Cutting Length Min to Cutting Length Max
Thread Size
Thread Size
  • 1 - 8 (4)
  • 1/2 - 13 (21)
  • 1/2 - 20 (15)
  • 1/4 - 20 (28)
  • 1/4 - 28 (19)
  • 10 - 24 (19)
  • 10 - 32 (26)
  • 2 - 56 (11)
  • 3/4 - 10 (10)
  • 3/4 - 16 (6)
  • 3/8 - 16 (29)
  • 3/8 - 24 (14)
  • 4 - 40 (17)
  • 4 - 48 (2)
  • 5 - 40 (7)
  • 5/16 - 18 (23)
  • 5/16 - 24 (16)
  • 5/16- 24 (1)
  • 5/8 - 11 (11)
  • 5/8 - 18 (6)
  • 6 - 32 (19)
  • 6 - 40 (4)
  • 7/16 - 14 (10)
  • 7/16 - 20 (12)
  • 8 - 32 (19)
  • 8 - 36 (4)
  • 9/16 - 18 (2)
  • M10 X 1 (10)
  • M10 X 1,25 (12)
  • M10 X 1,5 (35)
  • M12 X 1,25 (9)
  • M12 X 1,5 (15)
  • M12 X 1,75 (32)
  • M14 X 1,5 (14)
  • M14 X 2 (15)
  • M16 X 1,5 (14)
  • M16 X 2 (20)
  • M18 X 1,5 (3)
  • M18 X 2 (2)
  • M18 X 2,5 (1)
  • M2,5 X 0,45 (5)
  • M20 X 2,5 (10)
  • M24 X 3 (4)
  • M3 X 0,5 (24)
  • M3,5 X 0,6 (3)
  • M30 X 3,5 (2)
  • M36 X 4 (1)
  • M4 X 0,7 (26)
  • M5 X 0,8 (32)
  • M6 X 1 (40)
  • M7 X 1 (5)
  • M8 X 1 (12)
  • M8 X 1,25 (39)
Thread Tolerance Class ANSI
Thread Tolerance Class ANSI
  • 2BX (33)
  • 3BX (72)
Thread Tolerance Class ISO
Thread Tolerance Class ISO
  • 6H-I (50)
  • 6HX-I (231)
Tap PD Class
Tap PD Class
  • D10 (3)
  • D11 (3)
  • D12 (1)
  • D3 (13)
  • D4 (19)
  • D5 (34)
  • D6 (18)
  • D7 (2)
  • D8 (3)
  • D9 (8)
  • H2 (31)
  • H3 (147)
  • H4 (15)
  • H5 (41)
  • H6 (10)
  • H7 (6)
Connection Style
Connection Style
  • Cylindrical with Drive Square (732)
Number of Flutes
Number of Flutes
  • 0 (3)
  • 2 (97)
  • 3 (390)
  • 4 (156)
  • 5 (39)
  • 6 (55)
Internal Coolant Capability
Internal Coolant Capability
application
Coating
Coating
  • CrC/C (107)
  • TiCN (90)
  • Uncoated (1)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WH36MG (17)
  • WN35MG (8)
  • WN38MG (26)
  • WN44EG (79)
  • WN48EG (15)
  • WP31MG (51)
  • WS30MG (10)
  • WS32MG (16)
  • WS34MG (172)
  • WS39MG (100)
  • WU32MG (246)
Tap Standard
Tap Standard
  • ANSI (318)
  • DIN 2174 (41)
  • DIN 371 (93)
  • DIN 374 (54)
  • DIN 376 (68)
  • DIN-ANSI (150)
Tap Type
Tap Type
  • 11 (33)
  • 13 (64)
  • 3 (112)
  • 8 (531)
frontEnd
Thread TPI
Thread TPI
  • 8.0 mm (4)
  • 10.0 mm (10)
  • 11.0 mm (11)
  • 13.0 mm (21)
  • 14.0 mm (10)
  • 16.0 mm (35)
  • 18.0 mm (31)
  • 20.0 mm (55)
  • 24.0 mm (50)
  • 28.0 mm (19)
  • 32.0 mm (64)
  • 36.0 mm (4)
  • 40.0 mm (28)
  • 48.0 mm (2)
  • 56.0 mm (11)
Thread TPI Min to Thread TPI Max
Thread TPI
Thread TPI
  • 0.315 in (4)
  • 0.394 in (10)
  • 0.433 in (11)
  • 0.512 in (21)
  • 0.551 in (10)
  • 0.63 in (35)
  • 0.709 in (31)
  • 0.787 in (55)
  • 0.946 in (50)
  • 1.102 in (19)
  • 1.26 in (64)
  • 1.417 in (4)
  • 1.575 in (28)
  • 1.891 in (2)
  • 2.205 in (11)
Thread TPI Min to Thread TPI Max
Thread Pitch
Thread Pitch
  • 0.45 mm (5)
  • 0.5 mm (24)
  • 0.601 mm (3)
  • 0.701 mm (26)
  • 0.8 mm (32)
  • 1.0 mm (68)
  • 1.25 mm (59)
  • 1.5 mm (81)
  • 1.75 mm (32)
  • 2.0 mm (37)
  • 2.5 mm (11)
  • 3.0 mm (4)
  • 3.5 mm (2)
  • 4.0 mm (1)
Thread Pitch Min to Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.019 in (5)
  • 0.02 in (24)
  • 0.024 in (3)
  • 0.028 in (26)
  • 0.031 in (32)
  • 0.039 in (68)
  • 0.049 in (59)
  • 0.06 in (81)
  • 0.069 in (32)
  • 0.079 in (37)
  • 0.098 in (11)
  • 0.119 in (4)
  • 0.138 in (2)
  • 0.157 in (1)
Thread Pitch Min to Thread Pitch Max
Chamfer Form
Chamfer Form
  • FB (87)
  • PC (308)
  • SB (345)
backEnd
Back-End Diameter
Back-End Diameter
  • 3.5 mm (11)
  • 3.575 mm (81)
  • 4.275 mm (36)
  • 4.5 mm (13)
  • 4.926 mm (58)
  • 6.0 mm (48)
  • 6.075 mm (1)
  • 6.476 mm (63)
  • 7.0 mm (11)
  • 8.0 mm (25)
  • 8.076 mm (65)
  • 8.201 mm (22)
  • 9.0 mm (37)
  • 9.326 mm (54)
  • 9.675 mm (61)
  • 10.0 mm (28)
  • 10.9 mm (3)
  • 11.0 mm (28)
  • 12.0 mm (32)
  • 12.201 mm (20)
  • 14.0 mm (6)
  • 14.976 mm (16)
  • 16.0 mm (10)
  • 18.0 mm (4)
  • 20.326 mm (4)
  • 22.0 mm (2)
  • 28.0 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.138 in (11)
  • 0.142 in (81)
  • 0.168 in (36)
  • 0.177 in (13)
  • 0.194 in (58)
  • 0.237 in (48)
  • 0.24 in (1)
  • 0.255 in (63)
  • 0.276 in (11)
  • 0.315 in (25)
  • 0.318 in (65)
  • 0.323 in (22)
  • 0.354 in (37)
  • 0.367 in (54)
  • 0.381 in (61)
  • 0.394 in (28)
  • 0.429 in (3)
  • 0.433 in (28)
  • 0.473 in (32)
  • 0.48 in (20)
  • 0.551 in (6)
  • 0.59 in (16)
  • 0.63 in (10)
  • 0.709 in (4)
  • 0.8 in (4)
  • 0.866 in (2)
  • 1.102 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

High-Performance Taps • VICTORY™ • GT Series  • HSS-E PM

Victory™ Spiral-Flute HSS-E-PM Taps • Blind Holes
(57 Products)
  • タッピング:非スルーホールタッピング:非スルーホール
  • HSS-E-PMHSS-E-PM
  • 面取りフォームC(2~3)面取りフォームC(2~3)
  • タッピングねじれ角: 45°タッピングねじれ角: 45°
  • フラッドクーラント:タッピングフラッドクーラント:タッピング
  • はめあい区分:6HXはめあい区分:6HX
  • メーカー仕様:ANSIメーカー仕様:ANSI
  • メーカー仕様:Mメーカー仕様:M
  • メーカー仕様:MFメーカー仕様:MF
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Thread Tolerance Class ISO
3955136 GT305006 GT305006 WS34MG   8 - 32 53.9000 2.120 7.9000 .3100 19.4000 .7600 4.267 .168 3  
    定価:
    $32,82 /各.
    価格::
    数量
    3955138 GT305008 GT305008 WS34MG   1/4 - 20 63.5000 2.500 11.1000 .4400 25.5000 1.010 6.477 .255 3  
      定価:
      $35,55 /各.
      価格::
      数量
      3955139 GT305009 GT305009 WS34MG   1/4 - 20 63.5000 2.500 11.1000 .4400 25.5000 1.010 6.477 .255 3  
        定価:
        $35,55 /各.
        価格::
        数量
        3955172 GT305042 GT305042 WU32MG   3/8 - 16 74.6000 2.940 15.2000 .6000 32.2000 1.270 9.677 .381 3  
          定価:
          $43,00 /各.
          価格::
          数量
          3955185 GT305045 GT305045 WU32MG   1/2 - 13 85.9000 3.380 19.6000 .7700 44.2000 1.740 9.322 .367 4  
            定価:
            $60,14 /各.
            価格::
            数量
            3955062 GT305063 GT305063 WS34MG   M5 X 0,8 60.3000 2.370 11.8000 .4700 23.2000 .9100 4.928 .194 3 6HX-I
              定価:
              $36,31 /各.
              価格::
              数量
              定価:
              割引: %
              価格::
              配置転換 この品目はありません
              交換品 この品目は、代理店経由で入手できる場合があります
              数量

              販売包装単位

              オリジナル製品

              High-Performance Taps • VICTORY™ • GT Series  • HSS-E PM

              Victory™ • GT20 • Form D Plug Chamfer • Metric ANSI • Left-Hand Spiral Flute
              (56 Products)
              • タッピング:スルーホールタッピング:スルーホール
              • HSS-E-PMHSS-E-PM
              • 面取りフォームD(3.5~5)面取りフォームD(3.5~5)
              • タッピングねじれ角:L15°タッピングねじれ角:L15°
              • フラッドクーラント:タッピングフラッドクーラント:タッピング
              • はめあい区分:6HXはめあい区分:6HX
              • メーカー仕様:ANSIメーカー仕様:ANSI
              • メーカー仕様:Mメーカー仕様:M
              製品を表示
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes
              3954988 GT205042 GT205042 WU32MG   1/4 - 20 63.5000 2.500 11.1000 .4400 25.5000 1.000 6.477 .255 3
                定価:
                $35,37 /各.
                価格::
                数量
                3954990 GT205044 GT205044 WU32MG   5/16 - 18 69.0000 2.720 12.4000 .4900 28.8000 1.130 8.077 .318 3
                  定価:
                  $39,78 /各.
                  価格::
                  数量
                  3954992 GT205046 GT205046 WU32MG   3/8 - 16 74.6000 2.940 15.2000 .6000 32.2000 1.270 9.677 .381 3
                    定価:
                    $43,74 /各.
                    価格::
                    数量
                    3954993 GT205047 GT205047 WU32MG   3/8 - 16 74.6000 2.940 15.2000 .6000 32.2000 1.270 9.677 .381 3
                      定価:
                      $43,74 /各.
                      価格::
                      数量
                      3954995 GT205049 GT205049 WU32MG   1/2 - 13 85.9000 3.380 19.6000 .7700 44.2000 1.740 9.322 .367 3
                        定価:
                        $59,59 /各.
                        価格::
                        数量
                        3954996 GT205050 GT205050 WU32MG   5/8 - 11 96.8000 3.810 23.1000 .9100 48.0000 1.890 12.192 .48 4
                          定価:
                          $90,51 /各.
                          価格::
                          数量
                          定価:
                          割引: %
                          価格::
                          配置転換 この品目はありません
                          交換品 この品目は、代理店経由で入手できる場合があります
                          数量

                          販売包装単位

                          オリジナル製品

                          高性能タップ

                          Victory™スパイラルフルートHSS-E-PMタップ • 止まり穴のボトム近くのねじ切り
                          (3 Products)
                          • ねじ切り:非スルーホールねじ切り:非スルーホールねじ切り:非スルーホールねじ切り:非スルーホール
                          • HSS-E-PMHSS-E-PM
                          • 面取りフォームE(1.5~2)面取りフォームE(1.5~2)
                          • タッピングねじれ角: 45°タッピングねじれ角: 45°
                          • DIN番号371DIN番号371
                          • DIN番号374DIN番号374
                          • DIN番号376DIN番号376
                          • スルークーラント:軸方向:タッピングスルークーラント:軸方向:タッピング
                          • はめあい区分:6HXはめあい区分:6HX
                          • メーカー仕様:Mメーカー仕様:M
                          • メーカー仕様:MFメーカー仕様:MF
                          製品を表示
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
                          4153955 GT335001 GT335001 WU32MG   M5 X 0,8 70.0000 2.760 10.0000 .3900 25.0000 .9800 6.0 .2362 3 DIN 371 6HX-I
                            定価:
                            $57,47 /各.
                            価格::
                            数量
                            4153956 GT335002 GT335002 WU32MG   M6 X 1 80.0000 3.150 10.0000 .3900 30.0000 1.180 6.0 .2362 3 DIN 371 6HX-I
                              定価:
                              $58,35 /各.
                              価格::
                              数量
                              4153957 GT335003 GT335003 WU32MG   M8 X 1,25 90.0000 3.540 13.0000 .5100 35.0000 1.380 8.0 .315 3 DIN 371 6HX-I
                                定価:
                                $66,73 /各.
                                価格::
                                数量
                                定価:
                                割引: %
                                価格::
                                配置転換 この品目はありません
                                交換品 この品目は、代理店経由で入手できる場合があります
                                数量

                                販売包装単位

                                オリジナル製品

                                高性能タップ

                                Victory™スパイラルフルートHSS-E-PMタップ • 止まり穴
                                (10 Products)
                                • タッピング:非スルーホールタッピング:非スルーホール
                                • HSS-E-PMHSS-E-PM
                                • 面取りフォームC(2~3)面取りフォームC(2~3)
                                • タッピングねじれ角: 45°タッピングねじれ角: 45°
                                • DIN番号371DIN番号371
                                • DIN番号376DIN番号376
                                • スルークーラント:軸方向:タッピングスルークーラント:軸方向:タッピング
                                • はめあい区分:6HXはめあい区分:6HX
                                • メーカー仕様:Mメーカー仕様:M
                                製品を表示
                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
                                3955344 GT315002 GT315002 WS34MG   M6 X 1 80.0000 3.150 10.0000 .3900 30.0000 1.180 6.0 .2362 3 DIN 371 6HX-I
                                  定価:
                                  $52,51 /各.
                                  価格::
                                  数量
                                  3955346 GT315004 GT315004 WS34MG   M10 X 1,5 100.0000 3.940 15.0000 .5900 39.0000 1.540 10.0 .3937 3 DIN 371 6HX-I
                                    定価:
                                    $68,82 /各.
                                    価格::
                                    数量
                                    3955350 GT315008 GT315008 WU32MG   M6 X 1 80.0000 3.150 10.0000 .3900 30.0000 1.180 6.0 .2362 3 DIN 371 6HX-I
                                      定価:
                                      $52,51 /各.
                                      価格::
                                      数量
                                      3955351 GT315009 GT315009 WU32MG   M8 X 1,25 90.0000 3.540 13.0000 .5100 35.0000 1.380 8.0 .315 3 DIN 371 6HX-I
                                        定価:
                                        $59,97 /各.
                                        価格::
                                        数量
                                        4033744 GT315025 GT315025 WU32MG   M24 X 3 160.0000 6.300 30.0000 1.180 77.0000 3.030 18.0 .7087 5 DIN 376 6HX-I
                                          定価:
                                          $247,27 /各.
                                          価格::
                                          数量
                                          5143532 GT315035 GT315035 WU32MG   M20 X 2,5 140.0000 5.510 25.0000 .9800 64.0000 2.520 16.0 .6299 4 DIN 376 6HX-I
                                            定価:
                                            $231,16 /各.
                                            価格::
                                            数量
                                            定価:
                                            割引: %
                                            価格::
                                            配置転換 この品目はありません
                                            交換品 この品目は、代理店経由で入手できる場合があります
                                            数量

                                            販売包装単位

                                            オリジナル製品

                                            High-Performance Taps • VICTORY™ • GT Series  • HSS-E PM

                                            Victory™ • GT24 • Form C Semi-Bottoming Entry Taper • DIN Length ANSI Shank
                                            (14 Products)
                                            • タッピング:スルーホールタッピング:スルーホール
                                            • タッピング:非スルーホールタッピング:非スルーホール
                                            • HSS-E-PMHSS-E-PM
                                            • 3850938509
                                            • DIN Number ANSIDIN Number ANSI
                                            • フラッドクーラント:タッピングフラッドクーラント:タッピング
                                            • メーカー仕様:UNCメーカー仕様:UNC
                                            • メーカー仕様:UNFメーカー仕様:UNF
                                            製品を表示
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Number of Lube Grooves Tap Pitch Diameter Limit
                                            5944973 GT245008 GT245008 WU32MG   10 - 32 70.3000 2.770 10.0000 .3900 25.3000 1.000 4.928 .194 4 H6
                                              定価:
                                              $55,39 /各.
                                              価格::
                                              数量
                                              5944974 GT245009 GT245009 WU32MG   1/4 - 20 80.9000 3.180 13.0000 .5100 30.9000 1.220 6.477 .255 4 H4
                                                定価:
                                                $46,72 /各.
                                                価格::
                                                数量
                                                5944976 GT245011 GT245011 WU32MG   1/4 - 28 80.4000 3.160 13.0000 .5100 30.4000 1.200 6.477 .255 4 H4
                                                  定価:
                                                  $49,08 /各.
                                                  価格::
                                                  数量
                                                  5944978 GT245013 GT245013 WU32MG   5/16 - 18 91.0000 3.580 14.0000 .5500 36.0000 1.420 8.077 .318 4 H5
                                                    定価:
                                                    $61,84 /各.
                                                    価格::
                                                    数量
                                                    5944982 GT245017 GT245017 WU32MG   3/8 - 16 101.1000 3.980 16.0000 .6300 39.0000 1.540 9.677 .381 6 H5
                                                      定価:
                                                      $75,40 /各.
                                                      価格::
                                                      数量
                                                      5944990 GT245025 GT245025 WU32MG   1/2 - 13 110.0000 4.330 20.0000 .7900 47.0000 1.850 9.322 .367 6 H5
                                                        定価:
                                                        $103,74 /各.
                                                        価格::
                                                        数量
                                                        定価:
                                                        割引: %
                                                        価格::