提案製品

Product Family suggestions

がカートに正常に追加されました
カートを表示

通知

すべて既読にする
Mobile Menu

KM Micro™ OD Applications • Top Thread and Top Groove

フィルタを選択
Filters
フィルタ
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (10)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (10)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (10)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (10)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (10)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (10)
  • M Stainless Steel (10)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (10)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (10)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (10)
  • K Cast Iron (10)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (10)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (10)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (10)
  • N Non-Ferrous Materials (10)
    • N1
      Wrought Aluminum
      (10)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (10)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (10)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (10)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (10)
    • N6
      Carbon, Graphite Composites, CFRP
      (10)
    • N7
      MMC's
      (10)
  • S High-Temp Alloys (10)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (10)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (10)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (10)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (10)
  • H Hardened Materials (10)
    • H1
      Hardened Materials 44-48 HRC
      (10)
    • H2
      Hardened Materials 48-55 HRC
      (10)
    • H3
      Hardened Materials 56-60 HRC
      (2)
    • H4
      Hardened Materials >60 HRC
      (2)
Applications
Applications
  • Chamfer Turning Chamfer Turning (8)
  • Cut-Off Cut-Off (8)
  • Deep Grooving Deep Grooving (8)
  • Face Grooving Face Grooving (8)
  • Facing Facing (8)
  • Grooving Grooving (10)
  • ID Thread Turning ID Thread Turning (2)
  • Multiple Direction Cutting Multiple Direction Cutting (8)
  • OD Thread Turning OD Thread Turning (10)
  • Plunge Turning Plunge Turning (8)
  • Profiling Profiling (8)
  • Threading Threading (8)
  • Turning Turning (8)
Type of Thread
Type of Thread
  • 60 (10)
  • ACME (2)
  • API (2)
  • API RD (2)
  • BSW (2)
  • BUTTRESS (10)
  • M (6)
  • NPT (2)
  • STUB ACME (2)
  • UN (10)
  • UNJ (2)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (10)
  • Lightly Interrupted Cut (10)
  • Smooth Cut (10)
  • Varying Depth of Cut (10)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (10)
  • 2.0 (10)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (2)
  • 0.003 in (10)
  • 0.004 in (10)
  • 0.005 in (2)
  • 0.006 in (2)
  • 0.007 in (6)
  • 0.008 in (10)
  • 0.01 in (6)
  • 0.011 in (2)
  • 0.012 in (2)
  • 0.014 in (2)
  • 0.016 in (2)
  • 0.017 in (2)
  • 0.019 in (2)
  • 0.02 in (10)
  • 0.023 in (2)
  • 0.03 in (8)
  • 0.031 in (10)
  • 0.035 in (2)
  • 0.039 in (10)
  • 0.047 in (10)
  • 0.049 in (10)
  • 0.06 in (10)
  • 0.062 in (2)
  • 0.063 in (10)
  • 0.069 in (10)
  • 0.078 in (2)
  • 0.079 in (2)
  • 0.089 in (2)
  • 0.095 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (2)
  • 0.076 mm (10)
  • 0.1 mm (10)
  • 0.125 mm (2)
  • 0.151 mm (2)
  • 0.176 mm (6)
  • 0.2 mm (10)
  • 0.225 mm (2)
  • 0.25 mm (6)
  • 0.275 mm (2)
  • 0.301 mm (2)
  • 0.325 mm (2)
  • 0.351 mm (2)
  • 0.4 mm (2)
  • 0.426 mm (2)
  • 0.45 mm (2)
  • 0.476 mm (1)
  • 0.5 mm (10)
  • 0.576 mm (2)
  • 0.75 mm (8)
  • 0.775 mm (10)
  • 0.9 mm (2)
  • 1.0 mm (10)
  • 1.201 mm (10)
  • 1.25 mm (10)
  • 1.5 mm (10)
  • 1.576 mm (2)
  • 1.6 mm (10)
  • 1.75 mm (10)
  • 1.975 mm (2)
  • 2.0 mm (2)
  • 2.25 mm (2)
  • 2.401 mm (2)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (10)
  • K313 (10)
  • K420 (10)
  • K4H (6)
  • K68 (10)
  • KB1345 (2)
  • KB1630 (2)
  • KB5625 (2)
  • KBH20 (1)
  • KC250 (10)
  • KC5010 (10)
  • KC5025 (10)
  • KC5410 (10)
  • KC710 (10)
  • KC720 (10)
  • KC722 (10)
  • KC730 (10)
  • KC732 (2)
  • KC810 (10)
  • KC850 (10)
  • KC910 (6)
  • KC9110 (10)
  • KC9120 (2)
  • KC9320 (10)
  • KC935 (10)
  • KC950 (10)
  • KCK20 (6)
  • KCK20B (10)
  • KCP10B (10)
  • KCP25B (10)
  • KCU10 (10)
  • KCU25 (10)
  • KD050 (1)
  • KD081 (2)
  • KD100 (2)
  • KD120 (2)
  • KD1425 (2)
  • KT175 (10)
  • KT315 (10)
  • KU10T (10)
  • KU25T (10)
  • KU30T (10)
  • KY3000 (2)
  • THM (10)
  • TN10P (6)
  • TN6010 (10)
  • TN6025 (10)
  • TN7110 (10)
  • WU10HT (1)
  • WU10PT (4)
  • WU25PT (1)
Hand Of Tool
Hand Of Tool
  • L (5)
  • R (5)
F Dimension
F Dimension
  • 8.0 mm (2)
  • 10.0 mm (8)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.315 in (2)
  • 0.394 in (8)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (10)
  • 41.301 mm (2)
  • 47.6 mm (2)
  • 56.625 mm (8)
  • 88.9 mm (10)
  • 139.701 mm (2)
  • 174.601 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (10)
  • 1.627 in (2)
  • 1.874 in (2)
  • 2.229 in (8)
  • 3.5 in (10)
  • 5.5 in (2)
  • 6.875 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (8)
  • S (2)
frontEnd
Cutting Width
Cutting Width
  • 0.02 in (8)
  • 0.031 in (8)
  • 0.035 in (8)
  • 0.039 in (10)
  • 0.041 in (8)
  • 0.047 in (10)
  • 0.055 in (8)
  • 0.058 in (8)
  • 0.06 in (10)
  • 0.061 in (4)
  • 0.062 in (10)
  • 0.067 in (8)
  • 0.069 in (10)
  • 0.073 in (2)
  • 0.077 in (8)
  • 0.078 in (2)
  • 0.079 in (10)
  • 0.088 in (10)
  • 0.089 in (10)
  • 0.095 in (10)
  • 0.097 in (2)
  • 0.098 in (10)
  • 0.105 in (2)
  • 0.108 in (10)
  • 0.11 in (2)
  • 0.119 in (10)
  • 0.122 in (2)
  • 0.125 in (10)
  • 0.126 in (10)
  • 0.128 in (10)
  • 0.129 in (8)
  • 0.131 in (1)
  • 0.138 in (10)
  • 0.143 in (2)
  • 0.147 in (4)
  • 0.15 in (8)
  • 0.152 in (8)
  • 0.156 in (2)
  • 0.157 in (2)
  • 0.167 in (2)
  • 0.169 in (2)
  • 0.177 in (2)
  • 0.178 in (2)
  • 0.181 in (1)
  • 0.185 in (2)
  • 0.188 in (2)
  • 0.189 in (2)
  • 0.192 in (1)
  • 0.193 in (1)
  • 0.195 in (2)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (8)
  • 0.775 mm (8)
  • 0.8 mm (8)
  • 0.9 mm (8)
  • 1.0 mm (10)
  • 1.05 mm (8)
  • 1.201 mm (10)
  • 1.401 mm (8)
  • 1.475 mm (8)
  • 1.5 mm (10)
  • 1.55 mm (4)
  • 1.576 mm (10)
  • 1.701 mm (8)
  • 1.75 mm (10)
  • 1.826 mm (2)
  • 1.951 mm (8)
  • 1.975 mm (2)
  • 2.0 mm (10)
  • 2.2 mm (10)
  • 2.225 mm (10)
  • 2.25 mm (10)
  • 2.401 mm (10)
  • 2.475 mm (2)
  • 2.5 mm (10)
  • 2.676 mm (2)
  • 2.75 mm (10)
  • 2.801 mm (2)
  • 3.0 mm (10)
  • 3.1 mm (2)
  • 3.176 mm (10)
  • 3.2 mm (10)
  • 3.25 mm (10)
  • 3.276 mm (8)
  • 3.325 mm (1)
  • 3.5 mm (10)
  • 3.6 mm (2)
  • 3.725 mm (4)
  • 3.801 mm (8)
  • 3.85 mm (8)
  • 3.95 mm (2)
  • 3.975 mm (1)
  • 4.0 mm (2)
  • 4.25 mm (2)
  • 4.3 mm (2)
  • 4.5 mm (2)
  • 4.525 mm (2)
  • 4.601 mm (1)
  • 4.7 mm (2)
  • 4.775 mm (2)
  • 4.801 mm (2)
  • 4.875 mm (1)
  • 4.9 mm (1)
  • 4.95 mm (2)
Cutting Width Min to Cutting Width Max
Insert Size
Insert Size
  • 2 (8)
  • 3 (2)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (2)
  • B L (2)
  • C N (2)
  • D P (2)
  • H T (10)
  • H W (10)
backEnd
System Size
System Size
  • KM12 (2)
  • KM16 (8)
Back-End Diameter
Back-End Diameter
  • 12.0 mm (2)
  • 16.0 mm (8)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.473 in (2)
  • 0.63 in (8)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

NS-HPC • KM Micro™カッティングユニット外径加工アプリケーション NS-HPC • KM Micro™カッティングユニット外径加工アプリケーション

Top Notch™ ねじ切りおよび溝入れ
(2 Products)
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height [L1] Tool Length [L1] Tool Length Gage Insert
3180675 KM16NSL220HPC KM16NSL220HPC KM16 10.0000 .3937 2.0000 .0787 20.0000 .7874 NG2L
    定価:
    $290.84 /各
    価格::
    3180674 KM16NSR220HPC KM16NSR220HPC KM16 10.0000 .3937 2.0000 .0787 20.0000 .7874 NG2R
      定価:
      $290.84 /各
      価格::
      定価:
      割引: %
      価格::
      配置転換 この品目はありません
      交換品 この品目は、代理店経由で入手できる場合があります

      オリジナル製品

      NE • KM Micro™カッティングユニット外径加工アプリケーション NE • KM Micro™カッティングユニット外径加工アプリケーション

      Top Notch™ ねじ切りおよび溝入れ
      (2 Products)
      製品を表示
      SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height [L1] Tool Length [L1] Tool Length Gage Insert
      1898053 KM16NEL220 KM16NEL220 KM16 10.0000 .3937 8.0000 .3149 20.0000 .7874 NG2R
        定価:
        $222.65 /各
        価格::
        1884834 KM16NER220 KM16NER220 KM16 10.0000 .3937 8.0000 .3149 20.0000 .7874 NG2L
          定価:
          $222.65 /各
          価格::
          定価:
          割引: %
          価格::
          配置転換 この品目はありません
          交換品 この品目は、代理店経由で入手できる場合があります

          オリジナル製品

          NS • KM Micro™カッティングユニット外径加工アプリケーション NS • KM Micro™カッティングユニット外径加工アプリケーション

          Top Notch™ ねじ切りおよび溝入れ
          (6 Products)
          製品を表示
          SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height [L1] Tool Length [L1] Tool Length Gage Insert
          1925830 KM12NSL220 KM12NSL220 KM12 8.0000 .3150 6.0000 .2362 20.0000 .7874 NG2L
            定価:
            $222.65 /各
            価格::
            1920416 KM12NSR220 KM12NSR220 KM12 8.0000 .3150 6.0000 .2362 20.0000 .7874 NG2R
              定価:
              $229.34 /各
              価格::
              1846446 KM16NSL220 KM16NSL220 KM16 10.0000 .3940 8.0000 .3150 20.0000 .7870 NG2L
                定価:
                $229.34 /各
                価格::
                1851748 KM16NSL330 KM16NSL330 KM16 10.0000 .3937 8.0000 .3149 30.0000 1.181 NG3L
                  定価:
                  $222.65 /各
                  価格::
                  1831203 KM16NSR220 KM16NSR220 KM16 10.0000 .3940 8.0000 .3150 20.0000 .7870 NG2R
                    定価:
                    $229.34 /各
                    価格::
                    1831204 KM16NSR330 KM16NSR330 KM16 10.0000 .3937 8.0000 .3149 30.0000 1.181 NG3R
                      定価:
                      $229.34 /各
                      価格::
                      定価:
                      割引: %
                      価格::
                      配置転換 この品目はありません
                      交換品 この品目は、代理店経由で入手できる場合があります
                      product-image
                      Please adjust the following properties from

                      ISO製品型番

                      ANSI製品型番

                      to find similar products.
                      複製を作成しようとしています . 続行しますか?
                      削除しようとしています 続行しますか?
                      の名前を何に変更しますか?
                      有効な名前を入力してください
                      重複の名前を入力してください
                      有効な名前を入力してください
                      マイソリューションページにを追加しようとしています. 続行しますか?
                      有効な名前を入力してください
                      次のコピーを送信

                      有効なメールアドレスを入力してください
                      有効な名前を入力してください

                      次のCAD図面が見つかりました

                      お探しのファイルを一括して選択してダウンロードできます

                      お探しの種類のファイルが見つかりませんか?
                      図面請求 »

                      ダッシュボード情報を表示するには、ログインする必要があります
                      Session expired due to inactivity, please login again
                      カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
                      アイテムがカートに正常に追加されました
                      カートを表示
                      DOWNLOAD TYPE:



                      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                      SAP Material Number ISO製品型番 材種    
                      Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                      You are about to leave the Solution building process.

                      Are you sure you want to leave?