提案製品

Product Family suggestions

がカートに正常に追加されました
カートを表示

通知

すべて既読にする
Mobile Menu

M-Clamping • KM25

フィルタを選択
Filters
フィルタ
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (37)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (37)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (37)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (37)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (37)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (37)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (37)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (37)
  • M Stainless Steel (37)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (37)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (37)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (37)
  • K Cast Iron (37)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (37)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (37)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (37)
  • N Non-Ferrous Materials (37)
    • N1
      Wrought Aluminum
      (33)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (33)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (20)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (37)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (33)
    • N6
      Carbon, Graphite Composites, CFRP
      (30)
    • N7
      MMC's
      (33)
  • S High-Temp Alloys (37)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (37)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (37)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (37)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (37)
  • H Hardened Materials (34)
    • H1
      Hardened Materials 44-48 HRC
      (34)
    • H2
      Hardened Materials 48-55 HRC
      (34)
    • H3
      Hardened Materials 56-60 HRC
      (34)
    • H4
      Hardened Materials >60 HRC
      (30)
Applications
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Facing Facing (18)
  • Multiple Direction Cutting Multiple Direction Cutting (21)
  • Plunge Turning Plunge Turning (8)
  • Profiling Profiling (28)
  • Turning Turning (36)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (37)
  • Interrupted (26)
  • Lightly Interrupted Cut (37)
  • Smooth Cut (37)
  • Varying Depth of Cut (37)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 62.5 (1)
  • 75.0 (4)
  • 90.0 (12)
  • 93.0 (12)
  • 95.0 (4)
  • 107.5 (2)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (20)
  • 2.0 (19)
  • 3.0 (14)
  • 4.0 (19)
  • 6.0 (14)
  • 8.0 (12)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (17)
  • 0.008 in (23)
  • 0.016 in (33)
  • 0.024 in (2)
  • 0.031 in (33)
  • 0.047 in (33)
  • 0.062 in (4)
  • 0.063 in (26)
  • 0.094 in (4)
  • 0.095 in (16)
  • 0.125 in (6)
  • 0.126 in (6)
  • 0.188 in (2)
  • 0.25 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (17)
  • 0.2 mm (23)
  • 0.4 mm (33)
  • 0.601 mm (2)
  • 0.8 mm (33)
  • 1.201 mm (33)
  • 1.576 mm (4)
  • 1.6 mm (26)
  • 2.375 mm (4)
  • 2.401 mm (16)
  • 3.176 mm (6)
  • 3.2 mm (6)
  • 4.775 mm (2)
  • 6.351 mm (2)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (28)
  • 241 (4)
  • CL4 (14)
  • CM2 (28)
  • CM3 (20)
  • CM4 (14)
  • CPX (24)
  • CW2 (10)
  • CW2015 (28)
  • CW5025 (24)
  • GX (14)
  • HK1500 (22)
  • HT2 (7)
  • HTX (10)
  • K060 (18)
  • K090 (32)
  • K1 (10)
  • K10M (30)
  • K10P (30)
  • K10U (30)
  • K15U (30)
  • K20K (32)
  • K21 (20)
  • K25M (33)
  • K25P (30)
  • K313 (33)
  • K35P (22)
  • K420 (28)
  • K45 (28)
  • K68 (32)
  • KB1340 (11)
  • KB1345 (14)
  • KB1610 (24)
  • KB1625 (22)
  • KB1630 (18)
  • KB5610 (14)
  • KB5625 (22)
  • KB5630 (12)
  • KB9610 (24)
  • KB9640 (15)
  • KBH10 (24)
  • KBH10B (18)
  • KBH20 (24)
  • KBH20B (18)
  • KBK35 (4)
  • KC210 (18)
  • KC250 (18)
  • KC5010 (37)
  • KC5025 (33)
  • KC5410 (30)
  • KC5510 (33)
  • KC5525 (19)
  • KC710 (6)
  • KC720 (30)
  • KC722 (4)
  • KC725M (10)
  • KC730 (33)
  • KC7310 (33)
  • KC732 (30)
  • KC8050 (37)
  • KC810 (35)
  • KC850 (37)
  • KC9010 (33)
  • KC9025 (35)
  • KC910 (32)
  • KC9105 (33)
  • KC9110 (37)
  • KC9120 (35)
  • KC9125 (37)
  • KC9125RR (4)
  • KC9140 (35)
  • KC9145 (26)
  • KC9215 (33)
  • KC9225 (33)
  • KC9240 (33)
  • KC9240NEW (33)
  • KC9245 (33)
  • KC9315 (35)
  • KC9320 (35)
  • KC9325 (37)
  • KC935 (37)
  • KC950 (32)
  • KC990 (37)
  • KCD25 (4)
  • KCK05 (35)
  • KCK05B (33)
  • KCK15 (35)
  • KCK15B (35)
  • KCK20 (35)
  • KCK20B (35)
  • KCM15 (33)
  • KCM15B (33)
  • KCM25 (33)
  • KCM25B (33)
  • KCM35 (30)
  • KCM35B (16)
  • KCP05 (33)
  • KCP05B (27)
  • KCP10 (37)
  • KCP10B (37)
  • KCP25 (37)
  • KCP25B (37)
  • KCP25C (33)
  • KCP30 (35)
  • KCP30B (26)
  • KCP40 (26)
  • KCP40B (32)
  • KCPK05 (33)
  • KCS10 (4)
  • KCS10B (21)
  • KCU10 (35)
  • KCU25 (33)
  • KD050 (28)
  • KD081 (28)
  • KD100 (12)
  • KD120 (28)
  • KD1400 (20)
  • KD1405 (12)
  • KD1425 (20)
  • KM1 (20)
  • KMF (4)
  • KS15 (4)
  • KT1120 (8)
  • KT125 (28)
  • KT150 (22)
  • KT175 (28)
  • KT315 (33)
  • KT325 (13)
  • KT5020 (10)
  • KTP10 (4)
  • KU10T (33)
  • KU30T (37)
  • KY1310 (20)
  • KY1320 (30)
  • KY1540 (18)
  • KY1615 (32)
  • KY2000 (18)
  • KY2100 (12)
  • KY3000 (28)
  • KY3400 (26)
  • KY3500 (30)
  • KY4000 (12)
  • KY4300 (8)
  • KY4400 (32)
  • KYHK15B (32)
  • KYK10 (20)
  • KYK25 (26)
  • KYK35 (30)
  • KYS25 (12)
  • KYS30 (14)
  • NL200 (4)
  • NL250 (33)
  • NL300 (20)
  • NL400 (6)
  • NL400S (4)
  • NL920 (29)
  • P25 (14)
  • PB100 (4)
  • PB170 (4)
  • PB250 (4)
  • PB300 (4)
  • PS5 (7)
  • SP0819 (22)
  • SP0A00 (4)
  • SP3019 (26)
  • SP4019 (26)
  • SP4036 (4)
  • SP4093 (4)
  • SP61EJ (4)
  • THM (14)
  • THM-X (8)
  • THMF-X (14)
  • TN10P (33)
  • TN10U (30)
  • TN15M (30)
  • TN15U (30)
  • TN2000 (22)
  • TN20K (32)
  • TN20P (35)
  • TN30M (33)
  • TN30P (26)
  • TN4000 (22)
  • TN5015 (29)
  • TN5020 (25)
  • TN5105 (29)
  • TN5120 (29)
  • TN6010 (12)
  • TN6025 (16)
  • TN7005 (13)
  • TN7010 (29)
  • TN7015 (29)
  • TN7025 (29)
  • TN7035 (22)
  • TN7105 (15)
  • TN7110 (29)
  • TN7115 (29)
  • TN7125 (25)
  • TN7135 (22)
  • TN8025 (29)
  • TTI15 (7)
  • TTM (6)
  • TTM09 (16)
  • TTR (14)
  • TTS (14)
  • TTX (16)
  • WBH10C (18)
  • WBH10P (12)
  • WBH10U (24)
  • WBH20P (24)
  • WBH25P (22)
  • WBH25U (22)
  • WBH30P (12)
  • WBK40U (11)
  • WBK45U (14)
  • WDN00U (8)
  • WDN25U (20)
  • WK05CT (35)
  • WK15CT (16)
  • WK20CT (35)
  • WM15CT (33)
  • WM25CT (33)
  • WM35CT (33)
  • WP05CT (6)
  • WP15CT (37)
  • WP20TT (3)
  • WP25CT (37)
  • WP35CT (35)
  • WS10PT (33)
  • WS25PT (33)
  • WU10HT (33)
  • WU10PT (23)
  • WU25PT (23)
  • X00511 (4)
  • X00580 (4)
  • X00581 (4)
  • X00582 (4)
  • X00583 (4)
  • X00584 (4)
  • X00585 (4)
  • X00586 (4)
  • X00591 (4)
  • X00592 (4)
  • X00593 (4)
  • X00594 (4)
  • X00596 (4)
  • X00597 (4)
  • X00599 (4)
Hand Of Tool
Hand Of Tool
  • L (18)
  • N (2)
  • R (17)
Wiper Insert
Wiper Insert
  • N (37)
  • Y (23)
F Dimension
F Dimension
  • 0.0 mm (2)
  • 7.351 mm (1)
  • 13.0 mm (1)
  • 16.0 mm (24)
  • 22.0 mm (7)
  • 28.5 mm (2)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.0 in (2)
  • 0.289 in (1)
  • 0.512 in (1)
  • 0.63 in (24)
  • 0.866 in (7)
  • 1.122 in (2)
F Dimension Min to F Dimension Max
Cutting Direction
Cutting Direction
  • B (4)
  • E (9)
  • S (23)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (35)
  • NEGATIVE-ZERO (2)
frontEnd
Clamp Style
Clamp Style
  • M (36)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (4)
  • D-DIAMOND/RHOMBIC 55 (7)
  • R-ROUND (4)
  • S-SQUARE 90 (4)
  • T-TRIANGLE 60 (12)
  • V-DIAMOND/RHOMBIC 35 (4)
  • W-TRIGON 80 (2)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (35)
  • B L (30)
  • C A (34)
  • C N (30)
  • D P (20)
  • H T (33)
  • H W (37)
backEnd
Back-End Diameter
Back-End Diameter
  • 25.0 mm (36)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.984 in (36)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

MCLN 95° • KM20 Miniカッティングユニット • Kenloc™ MCLN 95° • KM20 Miniカッティングユニット • Kenloc™

Kenloc™
(2 Products)
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
2398795 KM25MCLNL1230 KM25MCLNL1230 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 CN..120408/CN..432 0.17 0.38
    定価:
    $175.14 /各
    価格::
    2265207 KM25MCLNR1230 KM25MCLNR1230 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 CN..120408/CN..432 0.17 0.38
      定価:
      $175.14 /各
      価格::
      定価:
      割引: %
      価格::
      配置転換 この品目はありません
      交換品 この品目は、代理店経由で入手できる場合があります

      オリジナル製品

      MRGN 0° • KM25 Miniカッティングユニット • Kenloc™ MRGN 0° • KM25 Miniカッティングユニット • Kenloc™

      M-クランプ
      (4 Products)
      製品を表示
      SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
      2629140 KM25MRGNL0930 KM25MRGNL0930 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 RN..090300/RN..32 0.17 0.37
        定価:
        $175.14 /各
        価格::
        2398804 KM25MRGNL1230 KM25MRGNL1230 KM25 30.0000 1.181 22.0000 .8661 12.5000 .4921 RN..120400/RN..43 0.19 0.42
          定価:
          $175.14 /各
          価格::
          2629139 KM25MRGNR0930 KM25MRGNR0930 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 RN..090300/RN..32 0.17 0.37
            定価:
            $175.14 /各
            価格::
            2398803 KM25MRGNR1230 KM25MRGNR1230 KM25 30.0000 1.181 22.0000 .8661 12.5000 .4921 RN..120400/RN..43 0.19 0.42
              この品目はありません
              この品目は、代理店経由で入手できる場合があります
              価格::
              定価:
              割引: %
              価格::
              配置転換 この品目はありません
              交換品 この品目は、代理店経由で入手できる場合があります

              オリジナル製品

              MCRN 75° • KM25 Miniカッティングユニット • Kenloc™ MCRN 75° • KM25 Miniカッティングユニット • Kenloc™

              M-クランプ
              (2 Products)
              製品を表示
              SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
              2398797 KM25MCRNL1230 KM25MCRNL1230 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 CN..120408/CN..432 0.20 0.43
                この品目はありません
                この品目は、代理店経由で入手できる場合があります
                価格::
                2398796 KM25MCRNR1230 KM25MCRNR1230 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 CN..120408/CN..432 0.20 0.43
                  定価:
                  $175.14 /各
                  価格::
                  定価:
                  割引: %
                  価格::
                  配置転換 この品目はありません
                  交換品 この品目は、代理店経由で入手できる場合があります

                  オリジナル製品

                  MTFN 90° • KM25 Miniカッティングユニット • Kenloc™ MTFN 90° • KM25 Miniカッティングユニット • Kenloc™

                  Kenloc™
                  (4 Products)
                  製品を表示
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
                  2655561 KM25MTFNL1630 KM25MTFNL1630 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 TN..160408/TN..332 0.19 0.43
                    この品目はありません
                    この品目は、代理店経由で入手できる場合があります
                    価格::
                    2398813 KM25MTFNL2230 KM25MTFNL2230 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 TN..220408/TN..432 0.20 0.43
                      定価:
                      $175.14 /各
                      価格::
                      2655560 KM25MTFNR1630 KM25MTFNR1630 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 TN..160408/TN..332 0.19 0.43
                        この品目はありません
                        この品目は、代理店経由で入手できる場合があります
                        価格::
                        2398812 KM25MTFNR2230 KM25MTFNR2230 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 TN..220408/TN..432 0.20 0.43
                          この品目はありません
                          この品目は、代理店経由で入手できる場合があります
                          価格::
                          定価:
                          割引: %
                          価格::
                          配置転換 この品目はありません
                          交換品 この品目は、代理店経由で入手できる場合があります

                          オリジナル製品

                          MTGN 90° • KM20 Miniカッティングユニット • Kenloc™ MTGN 90° • KM20 Miniカッティングユニット • Kenloc™

                          M-クランプ
                          (4 Products)
                          製品を表示
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
                          2655593 KM25MTGNL1630 KM25MTGNL1630 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 TN..160408/TN..332 1.90 0.41
                            この品目はありません
                            この品目は、代理店経由で入手できる場合があります
                            価格::
                            2398815 KM25MTGNL2230 KM25MTGNL2230 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 TN..220408/TN..432 0.18 0.40
                              この品目はありません
                              この品目は、代理店経由で入手できる場合があります
                              価格::
                              2655562 KM25MTGNR1630 KM25MTGNR1630 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 TN..160408/TN..332 1.90 0.41
                                定価:
                                $175.14 /各
                                価格::
                                2398814 KM25MTGNR2230 KM25MTGNR2230 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 TN..220408/TN..432 0.18 0.40
                                  この品目はありません
                                  この品目は、代理店経由で入手できる場合があります
                                  価格::
                                  定価:
                                  割引: %
                                  価格::
                                  配置転換 この品目はありません
                                  交換品 この品目は、代理店経由で入手できる場合があります

                                  オリジナル製品

                                  MSSN 45° • KM25 Miniカッティングユニット • Kenloc™ MSSN 45° • KM25 Miniカッティングユニット • Kenloc™

                                  M-クランプ
                                  (1 Products)
                                  製品を表示
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
                                  2398810 KM25MSSNR1230 KM25MSSNR1230 KM25 30.0000 1.181 7.3500 .2890 12.5000 .4921 SN..120408/SN..432 0.14 0.31
                                    定価:
                                    $175.14 /各
                                    価格::
                                    定価:
                                    割引: %
                                    価格::
                                    配置転換 この品目はありません
                                    交換品 この品目は、代理店経由で入手できる場合があります

                                    オリジナル製品

                                    MSRN 75° • KM25 Miniカッティングユニット • Kenloc™ MSRN 75° • KM25 Miniカッティングユニット • Kenloc™

                                    Kenloc™
                                    (1 Products)
                                    製品を表示
                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
                                    2398809 KM25MSRNL1230 KM25MSRNL1230 KM25 30.0000 1.181 13.0000 .5118 12.5000 .4921 SN..120408/SN..432 0.17 0.37
                                      定価:
                                      $175.14 /各
                                      価格::
                                      定価:
                                      割引: %
                                      価格::
                                      配置転換 この品目はありません
                                      交換品 この品目は、代理店経由で入手できる場合があります

                                      オリジナル製品

                                      MDQN 107° 30' • KM25 Miniカッティングユニット • Kenloc™ MDQN 107° 30' • KM25 Miniカッティングユニット • Kenloc™

                                      Kenloc™
                                      (2 Products)
                                      製品を表示
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
                                      2398802 KM25MDQNL150430 KM25MDQNL150430 KM25 30.0000 1.181 22.0000 .8661 12.5000 .4921 DN..150408/DN..432 0.17 0.38
                                        定価:
                                        $175.14 /各
                                        価格::
                                        2398801 KM25MDQNR150430 KM25MDQNR150430 KM25 30.0000 1.181 22.0000 .8661 12.5000 .4921 DN..150408/DN..432 0.17 0.38
                                          定価:
                                          $175.14 /各
                                          価格::
                                          定価:
                                          割引: %
                                          価格::
                                          配置転換 この品目はありません
                                          交換品 この品目は、代理店経由で入手できる場合があります

                                          オリジナル製品

                                          MSDN 45° • KM25 Miniカッティングユニット • Kenloc™ MSDN 45° • KM25 Miniカッティングユニット • Kenloc™

                                          Kenloc™
                                          (1 Products)
                                          製品を表示
                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
                                          2398805 KM25MSDNN1230 KM25MSDNN1230 KM25 30.0000 1.181 0.0000 .0000 12.5000 .4921 SN..120408/SN..432 0.15 0.33
                                            定価:
                                            $175.14 /各
                                            価格::
                                            定価:
                                            割引: %
                                            価格::
                                            配置転換 この品目はありません
                                            交換品 この品目は、代理店経由で入手できる場合があります

                                            オリジナル製品

                                            MDJN 93° • KM20 Miniカッティングユニット • Kenloc™ MDJN 93° • KM20 Miniカッティングユニット • Kenloc™

                                            Kenloc™
                                            (4 Products)
                                            製品を表示
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
                                            3176218 KM25MDJNL1130 KM25MDJNL1130 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 DN..110408/DN..332 0.14 0.30
                                              定価:
                                              $175.14 /各
                                              価格::
                                              2398799 KM25MDJNL150430 KM25MDJNL150430 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 DN..150408/DN..432 0.14 0.31
                                                定価:
                                                $175.14 /各
                                                価格::
                                                3176217 KM25MDJNR1130 KM25MDJNR1130 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 DN..110408/DN..332 0.14 0.30
                                                  定価:
                                                  $175.14 /各
                                                  価格::
                                                  2398798 KM25MDJNR150430 KM25MDJNR150430 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 DN..150408/DN..432 0.14 0.31
                                                    定価:
                                                    $175.14 /各
                                                    価格::
                                                    定価:
                                                    割引: %
                                                    価格::
                                                    配置転換 この品目はありません
                                                    交換品 この品目は、代理店経由で入手できる場合があります

                                                    オリジナル製品

                                                    MDPN 62° 30' • KM25 Miniカッティングユニット • Kenloc™ MDPN 62° 30' • KM25 Miniカッティングユニット • Kenloc™

                                                    M-クランプ
                                                    (1 Products)
                                                    製品を表示
                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
                                                    2398800 KM25MDPNN1130 KM25MDPNN1130 KM25 30.0000 1.181 0.0000 .0000 12.5000 .4921 DN..110408/DN..332 0.12 0.26
                                                      定価:
                                                      $175.14 /各
                                                      価格::
                                                      定価:
                                                      割引: %
                                                      価格::
                                                      配置転換 この品目はありません
                                                      交換品 この品目は、代理店経由で入手できる場合があります

                                                      オリジナル製品

                                                      MTJN 93° • KM25 Miniカッティングユニット • Kenloc™ MTJN 93° • KM25 Miniカッティングユニット • Kenloc™

                                                      Kenloc™
                                                      (4 Products)
                                                      製品を表示
                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
                                                      2655595 KM25MTJNL1630 KM25MTJNL1630 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 TN..160408/TN..332 0.19 0.42
                                                        定価:
                                                        $175.14 /各
                                                        価格::
                                                        2398817 KM25MTJNL2230 KM25MTJNL2230 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 TN..220408/TN..432 0.18 0.40
                                                          定価:
                                                          $175.14 /各
                                                          価格::
                                                          2655594 KM25MTJNR1630 KM25MTJNR1630 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 TN..160408/TN..332 0.19 0.42
                                                            定価:
                                                            $175.14 /各
                                                            価格::
                                                            2398816 KM25MTJNR2230 KM25MTJNR2230 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 TN..220408/TN..432 0.18 0.40
                                                              定価:
                                                              $175.14 /各
                                                              価格::
                                                              定価:
                                                              割引: %
                                                              価格::
                                                              配置転換 この品目はありません
                                                              交換品 この品目は、代理店経由で入手できる場合があります

                                                              オリジナル製品

                                                              MVJN 93° • KM20 Miniカッティングユニット • Kenloc™ MVJN 93° • KM20 Miniカッティングユニット • Kenloc™

                                                              M-クランプ
                                                              (2 Products)
                                                              製品を表示
                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
                                                              2398819 KM25MVJNL1630 KM25MVJNL1630 KM25 1.1810 30.000 16.0000 .6300 12.5000 .4920   0.13 0.28
                                                                定価:
                                                                $175.14 /各
                                                                価格::
                                                                2398818 KM25MVJNR1630 KM25MVJNR1630 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 VN..160408/VN..332 0.12 0.27
                                                                  定価:
                                                                  $175.14 /各
                                                                  価格::