提案製品

Product Family suggestions

がカートに正常に追加されました
カートを表示

通知

すべて既読にする
Mobile Menu

M-Clamping

M-Clamping

フィルタを選択
Filters
フィルタ
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (5)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (5)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (5)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (5)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (5)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (5)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (5)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (5)
  • M Stainless Steel (5)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (5)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (5)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (5)
  • K Cast Iron (5)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (5)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (5)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (5)
  • N Non-Ferrous Materials (5)
    • N1
      Wrought Aluminum
      (5)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (5)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (5)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (5)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (5)
    • N6
      Carbon, Graphite Composites, CFRP
      (5)
    • N7
      MMC's
      (5)
  • S High-Temp Alloys (5)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (5)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (5)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (5)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (5)
  • H Hardened Materials (5)
    • H1
      Hardened Materials 44-48 HRC
      (5)
    • H2
      Hardened Materials 48-55 HRC
      (5)
    • H3
      Hardened Materials 56-60 HRC
      (5)
    • H4
      Hardened Materials >60 HRC
      (5)
Applications
Applications
  • Facing Facing (5)
  • Multiple Direction Cutting Multiple Direction Cutting (5)
  • Profiling Profiling (4)
  • TRN Boring TRN Boring (4)
  • Turning Turning (5)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (5)
  • Interrupted (5)
  • Lightly Interrupted Cut (5)
  • Smooth Cut (5)
  • Varying Depth of Cut (5)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 93.0 (1)
  • 95.0 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (5)
  • 2.0 (5)
  • 4.0 (5)
  • 8.0 (4)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (5)
  • 0.008 in (5)
  • 0.016 in (5)
  • 0.031 in (5)
  • 0.047 in (5)
  • 0.062 in (4)
  • 0.063 in (5)
  • 0.094 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (5)
  • 0.2 mm (5)
  • 0.4 mm (5)
  • 0.8 mm (5)
  • 1.201 mm (5)
  • 1.576 mm (4)
  • 1.6 mm (5)
  • 2.375 mm (1)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (5)
  • 241 (4)
  • CL4 (4)
  • CM2 (5)
  • CM3 (4)
  • CM4 (4)
  • CPX (5)
  • CW2 (4)
  • CW2015 (5)
  • CW5025 (5)
  • GX (4)
  • HK1500 (4)
  • HT2 (4)
  • HTX (4)
  • K060 (5)
  • K090 (5)
  • K1 (4)
  • K10M (5)
  • K10P (5)
  • K10U (5)
  • K15U (5)
  • K20K (5)
  • K21 (4)
  • K25M (5)
  • K25P (5)
  • K313 (5)
  • K35P (1)
  • K420 (5)
  • K45 (5)
  • K68 (5)
  • KB1340 (4)
  • KB1345 (5)
  • KB1610 (5)
  • KB1625 (5)
  • KB1630 (5)
  • KB5610 (5)
  • KB5625 (5)
  • KB5630 (5)
  • KB9610 (5)
  • KB9640 (4)
  • KBH10 (5)
  • KBH10B (5)
  • KBH20 (5)
  • KBH20B (5)
  • KBK35 (4)
  • KC210 (5)
  • KC250 (5)
  • KC5010 (5)
  • KC5025 (5)
  • KC5410 (5)
  • KC5510 (5)
  • KC5525 (5)
  • KC710 (4)
  • KC720 (5)
  • KC722 (4)
  • KC725M (4)
  • KC730 (5)
  • KC7310 (5)
  • KC732 (5)
  • KC8050 (5)
  • KC810 (5)
  • KC850 (5)
  • KC9010 (5)
  • KC9025 (5)
  • KC910 (5)
  • KC9105 (5)
  • KC9110 (5)
  • KC9120 (5)
  • KC9125 (5)
  • KC9140 (5)
  • KC9145 (5)
  • KC9215 (5)
  • KC9225 (5)
  • KC9240 (5)
  • KC9240NEW (5)
  • KC9245 (5)
  • KC9315 (5)
  • KC9320 (5)
  • KC9325 (5)
  • KC935 (5)
  • KC950 (5)
  • KC990 (5)
  • KCD25 (1)
  • KCK05 (5)
  • KCK05B (5)
  • KCK15 (5)
  • KCK15B (5)
  • KCK20 (5)
  • KCK20B (5)
  • KCM15 (5)
  • KCM15B (5)
  • KCM25 (5)
  • KCM25B (5)
  • KCM35 (5)
  • KCM35B (4)
  • KCP05 (5)
  • KCP05B (5)
  • KCP10 (5)
  • KCP10B (5)
  • KCP25 (5)
  • KCP25B (5)
  • KCP25C (5)
  • KCP30 (5)
  • KCP30B (5)
  • KCP40 (5)
  • KCP40B (5)
  • KCPK05 (5)
  • KCS10 (4)
  • KCS10B (5)
  • KCU10 (5)
  • KCU25 (5)
  • KD050 (5)
  • KD081 (5)
  • KD100 (5)
  • KD120 (5)
  • KD1400 (5)
  • KD1405 (5)
  • KD1425 (5)
  • KM1 (4)
  • KMF (4)
  • KS15 (4)
  • KT1120 (4)
  • KT125 (5)
  • KT150 (5)
  • KT175 (5)
  • KT315 (5)
  • KT325 (4)
  • KTP10 (1)
  • KU10T (5)
  • KU30T (5)
  • KY1310 (5)
  • KY1320 (5)
  • KY1540 (5)
  • KY1615 (5)
  • KY2000 (5)
  • KY2100 (5)
  • KY3000 (5)
  • KY3400 (5)
  • KY3500 (5)
  • KY4000 (4)
  • KY4300 (5)
  • KY4400 (5)
  • KYHK15B (5)
  • KYK10 (5)
  • KYK25 (5)
  • KYK35 (5)
  • KYS25 (5)
  • KYS30 (5)
  • NL200 (4)
  • NL250 (5)
  • NL300 (4)
  • NL400 (4)
  • NL400S (1)
  • NL920 (5)
  • P25 (4)
  • PB100 (4)
  • PB170 (4)
  • PB250 (4)
  • PB300 (4)
  • PS5 (4)
  • SP0819 (5)
  • SP3019 (5)
  • SP4019 (5)
  • THM (4)
  • THM-X (4)
  • THMF-X (4)
  • TN10P (5)
  • TN10U (5)
  • TN15M (5)
  • TN15U (5)
  • TN2000 (4)
  • TN20K (5)
  • TN20P (5)
  • TN30M (5)
  • TN30P (5)
  • TN4000 (4)
  • TN5015 (5)
  • TN5020 (4)
  • TN5105 (5)
  • TN5120 (5)
  • TN6010 (5)
  • TN6025 (4)
  • TN7005 (5)
  • TN7010 (5)
  • TN7015 (5)
  • TN7025 (5)
  • TN7035 (4)
  • TN7105 (4)
  • TN7110 (5)
  • TN7115 (5)
  • TN7125 (4)
  • TN7135 (4)
  • TN8025 (5)
  • TTI15 (4)
  • TTR (4)
  • TTS (4)
  • TTX (4)
  • WBH10C (5)
  • WBH10P (5)
  • WBH10U (5)
  • WBH20P (5)
  • WBH25P (5)
  • WBH25U (5)
  • WBH30P (5)
  • WBK40U (4)
  • WBK45U (5)
  • WDN00U (5)
  • WDN25U (5)
  • WK05CT (5)
  • WK15CT (4)
  • WK20CT (5)
  • WM15CT (5)
  • WM25CT (5)
  • WM35CT (5)
  • WP05CT (4)
  • WP15CT (5)
  • WP25CT (5)
  • WP35CT (5)
  • WS10PT (5)
  • WS25PT (5)
  • WU10HT (5)
  • WU10PT (4)
  • WU25PT (4)
  • X00511 (4)
  • X00580 (4)
  • X00581 (4)
  • X00582 (4)
  • X00583 (4)
  • X00584 (4)
  • X00585 (4)
  • X00586 (4)
  • X00591 (4)
  • X00592 (4)
  • X00593 (4)
  • X00594 (4)
  • X00596 (4)
  • X00597 (4)
  • X00599 (4)
Hand Of Tool
Hand Of Tool
  • L (2)
  • R (3)
Wiper Insert
Wiper Insert
  • N (5)
  • Y (5)
Cutting Direction
Cutting Direction
  • B (4)
  • E (1)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (1)
  • DOUBLE POSITIVE (4)
Maximum Bore Depth
Maximum Bore Depth
  • 2.283 in (1)
  • 2.362 in (1)
  • 2.953 in (3)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 58.0 mm (1)
  • 60.0 mm (1)
  • 75.0 mm (3)
Maximum Bore Depth Min to Maximum Bore Depth Max
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (4)
  • D-DIAMOND/RHOMBIC 55 (1)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.177 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 4.5 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (5)
  • B L (5)
  • C A (5)
  • C N (5)
  • D P (5)
  • H T (5)
  • H W (5)
backEnd
System Size
System Size
  • KM32 (4)
  • KM32TS (1)
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

MCLN 95° - KM32TS 内部カッティングユニット（M-クランプ） MCLN 95° - KM32TS 内部カッティングユニット（M-クランプ）

(4 Products)
  • シャンク — KM-TS ISO 26622シャンク — KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • クーラント — スルークーラント 最大100 bar（1500 psi）クーラント — スルークーラント 最大100 bar（1500 psi）
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
1023841 KM32TSS25EMCLNL12 KM32TSS25EMCLNL12 32.0000 1.260 17.0000 .6690 60.0000 2.362 70.0000 2.756 CNMA120408/CNMA432 0.28 0.61
    定価:
    $413.68 /各
    価格::
    1023729 KM32TSS25EMCLNR12 KM32TSS25EMCLNR12 32.0000 1.259 17.0000 .6693 58.0000 2.283 70.0000 2.755 CN..120408/CN..432    
      定価:
      $413.68 /各
      価格::
      1023868 KM32TSS25GMCLNL12 KM32TSS25GMCLNL12 32.0000 1.259 17.0000 .6693 75.0000 2.952 90.0000 3.543 CN..120408/CN..432    
        この品目はありません
        この品目は、代理店経由で入手できる場合があります
        価格::
        1023866 KM32TSS25GMCLNR12 KM32TSS25GMCLNR12 32.0000 1.259 17.0000 .6693 75.0000 2.952 90.0000 3.543 CN..120408/CN..432    
          定価:
          $413.68 /各
          価格::
          定価:
          割引: %
          価格::
          配置転換 この品目はありません
          交換品 この品目は、代理店経由で入手できる場合があります

          オリジナル製品

          MDUN 93° - KM32TS 内部カッティングユニット（M-クランプ） MDUN 93° - KM32TS 内部カッティングユニット（M-クランプ）

          (1 Products)
          • シャンク — KM-TS ISO 26622シャンク — KM-TS ISO 26622
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
          • クーラント — スルークーラント 最大100 bar（1500 psi）クーラント — スルークーラント 最大100 bar（1500 psi）
          製品を表示
          SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert
          1023938 KM32TSS25GMDUNR15 KM32TSS25GMDUNR15 32.0000 1.259 17.0000 .6693 75.0000 2.952 90.0000 3.543 DN..150408/DN..432
            定価:
            $419.74 /各
            価格::
            定価:
            割引: %
            価格::
            配置転換 この品目はありません
            交換品 この品目は、代理店経由で入手できる場合があります
            product-image
            Please adjust the following properties from

            ISO製品型番

            ANSI製品型番

            to find similar products.
            複製を作成しようとしています . 続行しますか?
            削除しようとしています 続行しますか?
            の名前を何に変更しますか?
            有効な名前を入力してください
            重複の名前を入力してください
            有効な名前を入力してください
            マイソリューションページにを追加しようとしています. 続行しますか?
            有効な名前を入力してください
            次のコピーを送信

            有効なメールアドレスを入力してください
            有効な名前を入力してください

            次のCAD図面が見つかりました

            お探しのファイルを一括して選択してダウンロードできます

            お探しの種類のファイルが見つかりませんか?
            図面請求 »

            ダッシュボード情報を表示するには、ログインする必要があります
            Session expired due to inactivity, please login again
            カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
            アイテムがカートに正常に追加されました
            カートを表示
            DOWNLOAD TYPE:



            . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

            SAP Material Number ISO製品型番 材種    
            Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

            You are about to leave the Solution building process.

            Are you sure you want to leave?