提案製品

Product Family suggestions

がカートに正常に追加されました
カートを表示

通知

すべて既読にする
Mobile Menu

M-Clamping

フィルタを選択
Filters
フィルタ
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (44)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (44)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (44)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (44)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (44)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (44)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (44)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (44)
  • M Stainless Steel (44)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (44)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (44)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (44)
  • K Cast Iron (44)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (44)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (44)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (44)
  • N Non-Ferrous Materials (44)
    • N1
      Wrought Aluminum
      (44)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (44)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (42)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (44)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (44)
    • N6
      Carbon, Graphite Composites, CFRP
      (44)
    • N7
      MMC's
      (44)
  • S High-Temp Alloys (44)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (44)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (44)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (44)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (44)
  • H Hardened Materials (44)
    • H1
      Hardened Materials 44-48 HRC
      (44)
    • H2
      Hardened Materials 48-55 HRC
      (44)
    • H3
      Hardened Materials 56-60 HRC
      (44)
    • H4
      Hardened Materials >60 HRC
      (44)
Applications
Applications
  • Facing Facing (44)
  • Multiple Direction Cutting Multiple Direction Cutting (44)
  • Profiling Profiling (44)
  • TRN Boring TRN Boring (44)
  • Turning Turning (44)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (44)
  • Interrupted (44)
  • Lightly Interrupted Cut (44)
  • Smooth Cut (44)
  • Varying Depth of Cut (44)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 93.0 (17)
  • 95.0 (27)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (42)
  • 2.0 (39)
  • 3.0 (5)
  • 4.0 (39)
  • 6.0 (5)
  • 8.0 (22)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (42)
  • 0.008 in (42)
  • 0.016 in (44)
  • 0.024 in (5)
  • 0.031 in (44)
  • 0.047 in (44)
  • 0.062 in (20)
  • 0.063 in (44)
  • 0.094 in (19)
  • 0.095 in (2)
  • 0.126 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (42)
  • 0.2 mm (42)
  • 0.4 mm (44)
  • 0.601 mm (5)
  • 0.8 mm (44)
  • 1.201 mm (44)
  • 1.576 mm (20)
  • 1.6 mm (44)
  • 2.375 mm (19)
  • 2.401 mm (2)
  • 3.2 mm (2)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (39)
  • 241 (20)
  • CL4 (20)
  • CM2 (39)
  • CM3 (20)
  • CM4 (22)
  • CPX (39)
  • CW2 (20)
  • CW2015 (39)
  • CW5025 (44)
  • GX (20)
  • HK1500 (25)
  • HT2 (20)
  • HTX (20)
  • K060 (37)
  • K090 (39)
  • K1 (20)
  • K10M (44)
  • K10P (44)
  • K10U (42)
  • K15U (42)
  • K20K (44)
  • K21 (20)
  • K25M (44)
  • K25P (42)
  • K313 (44)
  • K35P (24)
  • K420 (39)
  • K45 (37)
  • K68 (39)
  • KB1340 (20)
  • KB1345 (37)
  • KB1610 (42)
  • KB1625 (37)
  • KB1630 (37)
  • KB5610 (42)
  • KB5625 (37)
  • KB5630 (37)
  • KB9610 (42)
  • KB9640 (25)
  • KBH10 (42)
  • KBH10B (37)
  • KBH20 (42)
  • KBH20B (37)
  • KBK35 (20)
  • KC210 (37)
  • KC250 (39)
  • KC5010 (44)
  • KC5025 (44)
  • KC5410 (44)
  • KC5510 (44)
  • KC5525 (42)
  • KC710 (20)
  • KC720 (44)
  • KC722 (20)
  • KC725M (22)
  • KC730 (44)
  • KC7310 (44)
  • KC732 (44)
  • KC8050 (44)
  • KC810 (44)
  • KC850 (44)
  • KC9010 (44)
  • KC9025 (44)
  • KC910 (44)
  • KC9105 (44)
  • KC9110 (44)
  • KC9120 (44)
  • KC9125 (44)
  • KC9140 (44)
  • KC9145 (44)
  • KC9215 (44)
  • KC9225 (44)
  • KC9240 (44)
  • KC9240NEW (44)
  • KC9245 (44)
  • KC9315 (44)
  • KC9320 (44)
  • KC9325 (44)
  • KC935 (44)
  • KC950 (44)
  • KC990 (44)
  • KCD25 (17)
  • KCK05 (44)
  • KCK05B (44)
  • KCK15 (44)
  • KCK15B (44)
  • KCK20 (44)
  • KCK20B (44)
  • KCM15 (44)
  • KCM15B (44)
  • KCM25 (44)
  • KCM25B (44)
  • KCM35 (44)
  • KCM35B (27)
  • KCP05 (44)
  • KCP05B (42)
  • KCP10 (44)
  • KCP10B (44)
  • KCP25 (44)
  • KCP25B (44)
  • KCP25C (44)
  • KCP30 (44)
  • KCP30B (44)
  • KCP40 (44)
  • KCP40B (44)
  • KCPK05 (44)
  • KCS10 (20)
  • KCS10B (44)
  • KCU10 (44)
  • KCU25 (44)
  • KD050 (37)
  • KD081 (37)
  • KD100 (37)
  • KD120 (37)
  • KD1400 (42)
  • KD1405 (37)
  • KD1425 (42)
  • KM1 (20)
  • KMF (20)
  • KS15 (20)
  • KT1120 (20)
  • KT125 (37)
  • KT150 (37)
  • KT175 (37)
  • KT315 (42)
  • KT325 (20)
  • KTP10 (17)
  • KU10T (42)
  • KU30T (44)
  • KY1310 (44)
  • KY1320 (44)
  • KY1540 (37)
  • KY1615 (39)
  • KY2000 (39)
  • KY2100 (37)
  • KY3000 (39)
  • KY3400 (44)
  • KY3500 (44)
  • KY4000 (22)
  • KY4300 (39)
  • KY4400 (44)
  • KYHK15B (44)
  • KYK10 (42)
  • KYK25 (44)
  • KYK35 (44)
  • KYS25 (37)
  • KYS30 (42)
  • NL200 (20)
  • NL250 (44)
  • NL300 (22)
  • NL400 (27)
  • NL400S (17)
  • NL920 (44)
  • P25 (20)
  • PB100 (20)
  • PB170 (20)
  • PB250 (20)
  • PB300 (20)
  • PS5 (20)
  • SP0819 (44)
  • SP3019 (44)
  • SP4019 (44)
  • THM (20)
  • THM-X (20)
  • THMF-X (20)
  • TN10P (44)
  • TN10U (42)
  • TN15M (44)
  • TN15U (42)
  • TN2000 (25)
  • TN20K (44)
  • TN20P (44)
  • TN30M (44)
  • TN30P (44)
  • TN4000 (25)
  • TN5015 (44)
  • TN5020 (27)
  • TN5105 (42)
  • TN5120 (44)
  • TN6010 (37)
  • TN6025 (25)
  • TN7005 (42)
  • TN7010 (44)
  • TN7015 (44)
  • TN7025 (44)
  • TN7035 (27)
  • TN7105 (25)
  • TN7110 (44)
  • TN7115 (44)
  • TN7125 (27)
  • TN7135 (27)
  • TN8025 (44)
  • TTI15 (20)
  • TTR (20)
  • TTS (20)
  • TTX (20)
  • WBH10C (42)
  • WBH10P (37)
  • WBH10U (42)
  • WBH20P (42)
  • WBH25P (37)
  • WBH25U (37)
  • WBH30P (37)
  • WBK40U (20)
  • WBK45U (37)
  • WDN00U (37)
  • WDN25U (42)
  • WK05CT (44)
  • WK15CT (25)
  • WK20CT (44)
  • WM15CT (44)
  • WM25CT (44)
  • WM35CT (44)
  • WP05CT (25)
  • WP15CT (44)
  • WP25CT (44)
  • WP35CT (44)
  • WS10PT (44)
  • WS25PT (44)
  • WU10HT (44)
  • WU10PT (25)
  • WU25PT (25)
  • X00511 (20)
  • X00580 (20)
  • X00581 (20)
  • X00582 (20)
  • X00583 (20)
  • X00584 (20)
  • X00585 (20)
  • X00586 (20)
  • X00591 (20)
  • X00592 (20)
  • X00593 (20)
  • X00594 (20)
  • X00596 (20)
  • X00597 (20)
  • X00599 (20)
Hand Of Tool
Hand Of Tool
  • L (22)
  • R (22)
Wiper Insert
Wiper Insert
  • N (44)
  • Y (42)
F Dimension
F Dimension
  • 17.0 mm (13)
  • 22.0 mm (13)
  • 27.0 mm (16)
  • 35.0 mm (2)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.669 in (13)
  • 0.866 in (13)
  • 1.063 in (16)
  • 1.379 in (2)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 32.0 mm (13)
  • 40.0 mm (13)
  • 50.0 mm (16)
  • 63.0 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.26 in (13)
  • 1.575 in (13)
  • 1.969 in (16)
  • 2.48 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (27)
  • E (6)
Maximum Bore Depth
Maximum Bore Depth
  • 1.508 in (4)
  • 1.903 in (1)
  • 1.938 in (2)
  • 2.382 in (4)
  • 2.775 in (4)
  • 3.2 in (4)
  • 3.434 in (6)
  • 3.593 in (2)
  • 3.594 in (2)
  • 3.789 in (5)
  • 4.738 in (8)
  • 5.513 in (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 38.301 mm (4)
  • 48.301 mm (1)
  • 49.225 mm (2)
  • 60.475 mm (4)
  • 70.476 mm (4)
  • 81.25 mm (4)
  • 87.226 mm (6)
  • 91.25 mm (2)
  • 91.275 mm (2)
  • 96.25 mm (5)
  • 120.351 mm (8)
  • 140.0 mm (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (22)
  • D-DIAMOND/RHOMBIC 55 (17)
  • W-TRIGON 80 (5)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (42)
  • B L (42)
  • C A (44)
  • C N (44)
  • D P (42)
  • H T (42)
  • H W (44)
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

MDUN 93° • KM50TS™ MDUN 93° • KM50TS™

M-クランプ
(17 Products)
  • シャンク — KM-TS ISO 26622シャンク — KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • クーラント — スルークーラント 最大100 bar（1500 psi）クーラント — スルークーラント 最大100 bar（1500 psi）
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
3753597 KM50TSS25DMDUNL15 KM50TSS25DMDUNL15 32.0000 1.259 17.0000 .6693 38.3000 1.508 60.0000 2.362 DN..150408/DN..432 0.47 1.03
    この品目はありません
    この品目は、代理店経由で入手できる場合があります
    価格::
    3753599 KM50TSS25EMDUNL15 KM50TSS25EMDUNL15 32.0000 1.259 17.0000 .6693 48.3000 1.902 70.0000 2.755 DN..150408/DN..432 0.51 1.11
      この品目はありません
      この品目は、代理店経由で入手できる場合があります
      価格::
      3753480 KM50TSS40HMDUNL15 KM50TSS40HMDUNL15 50.0000 1.968 27.0000 1.063 81.2600 3.200 100.0000 3.937 DN..150408/DN..432 1.03 2.28
        定価:
        $479.47 /各
        価格::
        3753485 KM50TSS40HMDUNR15 KM50TSS40HMDUNR15 50.0000 1.968 27.0000 1.063 81.2600 3.200 100.0000 3.937 DN..150408/DN..432 1.03 2.27
          定価:
          $479.47 /各
          価格::
          3753488 KM50TSS40JMDUNL15 KM50TSS40JMDUNL15 50.0000 1.968 27.0000 1.063 91.2600 3.593 110.0000 4.330 DN..150408/DN..432 1.13 2.49
            定価:
            $479.47 /各
            価格::
            3753492 KM50TSS40LMDUNL15 KM50TSS40LMDUNL15 50.0000 1.968 27.0000 1.063 120.3400 4.738 140.0000 5.511 DN..150408/DN..432 1.42 3.12
              定価:
              $479.47 /各
              価格::
              定価:
              割引: %
              価格::
              配置転換 この品目はありません
              交換品 この品目は、代理店経由で入手できる場合があります

              オリジナル製品

              MWLN 95° • KM50TS™ MWLN 95° • KM50TS™

              M-クランプ
              (5 Products)
              • シャンク — KM-TS ISO 26622シャンク — KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • クーラント — スルークーラント 最大100 bar（1500 psi）クーラント — スルークーラント 最大100 bar（1500 psi）
              製品を表示
              SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
              3747122 KM50TSS25JMWLNL08 KM50TSS25JMWLNL08 32.0000 1.259 17.0000 .6693 87.2300 3.434 110.0000 4.330 WN..080408/WN..432 0.67 1.47
                定価:
                $479.47 /各
                価格::
                3747121 KM50TSS25JMWLNR08 KM50TSS25JMWLNR08 32.0000 1.259 17.0000 .6693 87.2300 3.434 110.0000 4.330 WN..080408/WN..432 0.67 1.48
                  定価:
                  $479.47 /各
                  価格::
                  3747123 KM50TSS32KMWLNR08 KM50TSS32KMWLNR08 40.0000 1.574 22.0000 .8661 96.2600 3.790 125.0000 4.921 WN..080408/WN..432 0.99 2.17
                    定価:
                    $479.47 /各
                    価格::
                    3747119 KM50TSS40LMWLNL08 KM50TSS40LMWLNL08 50.0000 1.968 27.0000 1.063 120.3400 4.738 140.0000 5.511 WN..080408/WN..432 1.40 3.08
                      定価:
                      $479.47 /各
                      価格::
                      3747120 KM50TSS40LMWLNR08 KM50TSS40LMWLNR08 50.0000 1.968 27.0000 1.063 120.3400 4.738 140.0000 5.511 WN..080408/WN..432 1.40 3.08
                        定価:
                        $479.47 /各
                        価格::
                        定価:
                        割引: %
                        価格::
                        配置転換 この品目はありません
                        交換品 この品目は、代理店経由で入手できる場合があります

                        オリジナル製品

                        MCLN 95° • KM50TS™ MCLN 95° • KM50TS™

                        M-クランプ
                        (22 Products)
                        • シャンク — KM-TS ISO 26622シャンク — KM-TS ISO 26622
                        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                        • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                        • クーラント — スルークーラント 最大100 bar（1500 psi）クーラント — スルークーラント 最大100 bar（1500 psi）
                        製品を表示
                        SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
                        3753688 KM50TSS25DMCLNR12 KM50TSS25DMCLNR12 32.0000 1.259 17.0000 .6693 38.3000 1.507 60.0000 2.362 CN..120408/CN..432 0.48 1.06
                          定価:
                          $479.47 /各
                          価格::
                          3753689 KM50TSS25EMCLNL12 KM50TSS25EMCLNL12 32.0000 1.259 17.0000 .6693 49.2200 1.937 70.0000 2.755 CN..120408/CN..432 0.51 1.13
                            定価:
                            $479.47 /各
                            価格::
                            3753690 KM50TSS25EMCLNR12 KM50TSS25EMCLNR12 32.0000 1.259 17.0000 .6693 49.2200 1.937 70.0000 2.755 CN..120408/CN..432 0.51 1.13
                              定価:
                              $479.47 /各
                              価格::
                              3753691 KM50TSS25JMCLNL12 KM50TSS25JMCLNL12 32.0000 1.259 17.0000 .6693 87.2300 3.434 110.0000 4.330 CN..120408/CN..432 0.67 1.48
                                定価:
                                $479.47 /各
                                価格::
                                3753692 KM50TSS25JMCLNR12 KM50TSS25JMCLNR12 32.0000 1.259 17.0000 .6693 87.2300 3.434 110.0000 4.330 CN..120408/CN..432 0.67 1.48
                                  定価:
                                  $479.47 /各
                                  価格::
                                  3753694 KM50TSS32FMCLNR12 KM50TSS32FMCLNR12 40.0000 1.574 22.0000 .8661 60.4700 2.380 80.0000 3.149 CN..120408/CN..432 0.67 1.48
                                    定価:
                                    $479.47 /各
                                    価格::
                                    定価:
                                    割引: %
                                    価格::
                                    配置転換 この品目はありません
                                    交換品 この品目は、代理店経由で入手できる場合があります
                                    product-image
                                    Please adjust the following properties from

                                    ISO製品型番

                                    ANSI製品型番

                                    to find similar products.
                                    複製を作成しようとしています . 続行しますか?
                                    削除しようとしています 続行しますか?
                                    の名前を何に変更しますか?
                                    有効な名前を入力してください
                                    重複の名前を入力してください
                                    有効な名前を入力してください
                                    マイソリューションページにを追加しようとしています. 続行しますか?
                                    有効な名前を入力してください
                                    次のコピーを送信

                                    有効なメールアドレスを入力してください
                                    有効な名前を入力してください

                                    次のCAD図面が見つかりました

                                    お探しのファイルを一括して選択してダウンロードできます

                                    お探しの種類のファイルが見つかりませんか?
                                    図面請求 »

                                    ダッシュボード情報を表示するには、ログインする必要があります
                                    Session expired due to inactivity, please login again
                                    カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
                                    アイテムがカートに正常に追加されました
                                    カートを表示
                                    DOWNLOAD TYPE:



                                    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                    SAP Material Number ISO製品型番 材種    
                                    Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                                    You are about to leave the Solution building process.

                                    Are you sure you want to leave?