提案製品

Product Family suggestions

がカートに正常に追加されました
カートを表示

通知

すべて既読にする
Mobile Menu

TopThread™ and TopGroove™

フィルタを選択
Filters
フィルタ
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (18)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (18)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (18)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (18)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (18)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (18)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (18)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (18)
  • M Stainless Steel (18)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (18)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (18)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (18)
  • K Cast Iron (18)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (18)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (18)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (18)
  • N Non-Ferrous Materials (18)
    • N1
      Wrought Aluminum
      (18)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (18)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (18)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (18)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (18)
    • N6
      Carbon, Graphite Composites, CFRP
      (18)
    • N7
      MMC's
      (18)
  • S High-Temp Alloys (18)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (18)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (18)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (18)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (18)
  • H Hardened Materials (18)
    • H1
      Hardened Materials 44-48 HRC
      (18)
    • H2
      Hardened Materials 48-55 HRC
      (18)
    • H3
      Hardened Materials 56-60 HRC
      (12)
    • H4
      Hardened Materials >60 HRC
      (12)
Applications
Applications
  • Grooving Grooving (18)
  • ID Grooving ID Grooving (17)
  • ID Thread Turning ID Thread Turning (18)
  • OD Thread Turning OD Thread Turning (18)
  • Threading Threading (18)
Type of Thread
Type of Thread
  • 60 (18)
  • ACME (12)
  • API (12)
  • API RD (8)
  • BSW (8)
  • BUTTRESS (18)
  • M (11)
  • NPT (8)
  • STUB ACME (8)
  • UN (18)
  • UNJ (8)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (18)
  • Lightly Interrupted Cut (18)
  • Smooth Cut (18)
  • Varying Depth of Cut (18)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (18)
  • 2.0 (18)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (8)
  • 0.003 in (18)
  • 0.004 in (14)
  • 0.005 in (8)
  • 0.006 in (12)
  • 0.007 in (15)
  • 0.008 in (18)
  • 0.01 in (15)
  • 0.011 in (8)
  • 0.012 in (8)
  • 0.014 in (12)
  • 0.016 in (8)
  • 0.017 in (8)
  • 0.019 in (12)
  • 0.02 in (14)
  • 0.023 in (12)
  • 0.03 in (6)
  • 0.031 in (14)
  • 0.035 in (12)
  • 0.039 in (14)
  • 0.047 in (14)
  • 0.049 in (14)
  • 0.06 in (14)
  • 0.062 in (8)
  • 0.063 in (18)
  • 0.069 in (14)
  • 0.078 in (8)
  • 0.079 in (12)
  • 0.089 in (12)
  • 0.095 in (12)
  • 0.098 in (4)
  • 0.125 in (4)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (8)
  • 0.076 mm (18)
  • 0.1 mm (14)
  • 0.125 mm (8)
  • 0.151 mm (12)
  • 0.176 mm (15)
  • 0.2 mm (18)
  • 0.225 mm (8)
  • 0.25 mm (15)
  • 0.275 mm (8)
  • 0.301 mm (8)
  • 0.325 mm (12)
  • 0.351 mm (12)
  • 0.4 mm (8)
  • 0.426 mm (8)
  • 0.45 mm (12)
  • 0.476 mm (4)
  • 0.5 mm (14)
  • 0.576 mm (12)
  • 0.75 mm (6)
  • 0.775 mm (14)
  • 0.9 mm (12)
  • 1.0 mm (14)
  • 1.201 mm (14)
  • 1.25 mm (14)
  • 1.5 mm (14)
  • 1.576 mm (8)
  • 1.6 mm (18)
  • 1.75 mm (14)
  • 1.975 mm (8)
  • 2.0 mm (12)
  • 2.25 mm (12)
  • 2.401 mm (12)
  • 2.5 mm (4)
  • 3.176 mm (4)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (14)
  • K313 (18)
  • K420 (18)
  • K4H (11)
  • K68 (18)
  • KB1345 (12)
  • KB1630 (12)
  • KB5625 (8)
  • KBH20 (4)
  • KC250 (14)
  • KC5010 (18)
  • KC5025 (18)
  • KC5410 (18)
  • KC710 (18)
  • KC720 (18)
  • KC722 (18)
  • KC730 (18)
  • KC732 (8)
  • KC810 (18)
  • KC850 (18)
  • KC910 (11)
  • KC9110 (18)
  • KC9120 (8)
  • KC9320 (18)
  • KC935 (18)
  • KC950 (18)
  • KCK20 (15)
  • KCK20B (18)
  • KCP10B (18)
  • KCP25B (18)
  • KCU10 (18)
  • KCU25 (18)
  • KD050 (4)
  • KD081 (8)
  • KD100 (10)
  • KD120 (12)
  • KD1425 (8)
  • KT175 (14)
  • KT315 (18)
  • KU10T (18)
  • KU25T (18)
  • KU30T (18)
  • KY3000 (12)
  • THM (14)
  • TN10P (13)
  • TN6010 (18)
  • TN6025 (18)
  • TN7110 (18)
  • WU10HT (4)
  • WU10PT (7)
  • WU25PT (4)
Hand Of Tool
Hand Of Tool
  • L (9)
  • R (9)
F Dimension
F Dimension
  • 11.0 mm (4)
  • 13.0 mm (2)
  • 17.0 mm (2)
  • 22.0 mm (4)
  • 27.0 mm (6)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.433 in (4)
  • 0.512 in (2)
  • 0.669 in (2)
  • 0.866 in (4)
  • 1.063 in (6)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 18.5 mm (2)
  • 20.0 mm (2)
  • 25.0 mm (2)
  • 34.0 mm (2)
  • 40.0 mm (4)
  • 50.0 mm (6)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.728 in (2)
  • 0.787 in (2)
  • 0.984 in (2)
  • 1.339 in (2)
  • 1.575 in (4)
  • 1.969 in (6)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Bore Depth
Maximum Bore Depth
  • 1.655 in (2)
  • 2.211 in (2)
  • 2.769 in (2)
  • 2.775 in (2)
  • 3.469 in (2)
  • 3.593 in (2)
  • 3.789 in (2)
  • 4.738 in (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 42.0 mm (2)
  • 56.151 mm (2)
  • 70.325 mm (2)
  • 70.476 mm (2)
  • 88.101 mm (2)
  • 91.25 mm (2)
  • 96.25 mm (2)
  • 120.351 mm (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (17)
frontEnd
Clamp Style
Clamp Style
  • N (17)
Cutting Width
Cutting Width
  • 0.02 in (6)
  • 0.031 in (6)
  • 0.035 in (6)
  • 0.039 in (14)
  • 0.041 in (6)
  • 0.047 in (14)
  • 0.055 in (6)
  • 0.058 in (6)
  • 0.06 in (14)
  • 0.061 in (3)
  • 0.062 in (14)
  • 0.067 in (6)
  • 0.069 in (14)
  • 0.073 in (8)
  • 0.077 in (6)
  • 0.078 in (8)
  • 0.079 in (14)
  • 0.088 in (14)
  • 0.089 in (14)
  • 0.095 in (14)
  • 0.097 in (8)
  • 0.098 in (14)
  • 0.105 in (8)
  • 0.108 in (14)
  • 0.11 in (8)
  • 0.119 in (18)
  • 0.122 in (8)
  • 0.125 in (18)
  • 0.126 in (18)
  • 0.128 in (14)
  • 0.129 in (6)
  • 0.131 in (4)
  • 0.138 in (18)
  • 0.143 in (8)
  • 0.147 in (3)
  • 0.15 in (6)
  • 0.152 in (6)
  • 0.156 in (8)
  • 0.157 in (12)
  • 0.167 in (12)
  • 0.169 in (8)
  • 0.177 in (12)
  • 0.178 in (8)
  • 0.181 in (4)
  • 0.185 in (10)
  • 0.188 in (12)
  • 0.189 in (12)
  • 0.192 in (4)
  • 0.193 in (4)
  • 0.195 in (8)
  • 0.197 in (4)
  • 0.202 in (4)
  • 0.213 in (4)
  • 0.217 in (4)
  • 0.219 in (4)
  • 0.237 in (4)
  • 0.25 in (4)
  • 0.255 in (4)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (6)
  • 0.775 mm (6)
  • 0.8 mm (6)
  • 0.9 mm (6)
  • 1.0 mm (14)
  • 1.05 mm (6)
  • 1.201 mm (14)
  • 1.401 mm (6)
  • 1.475 mm (6)
  • 1.5 mm (14)
  • 1.55 mm (3)
  • 1.576 mm (14)
  • 1.701 mm (6)
  • 1.75 mm (14)
  • 1.826 mm (8)
  • 1.951 mm (6)
  • 1.975 mm (8)
  • 2.0 mm (14)
  • 2.2 mm (14)
  • 2.225 mm (14)
  • 2.25 mm (14)
  • 2.401 mm (14)
  • 2.475 mm (8)
  • 2.5 mm (14)
  • 2.676 mm (8)
  • 2.75 mm (14)
  • 2.801 mm (8)
  • 3.0 mm (18)
  • 3.1 mm (8)
  • 3.176 mm (18)
  • 3.2 mm (18)
  • 3.25 mm (14)
  • 3.276 mm (6)
  • 3.325 mm (4)
  • 3.5 mm (18)
  • 3.6 mm (8)
  • 3.725 mm (3)
  • 3.801 mm (6)
  • 3.85 mm (6)
  • 3.95 mm (8)
  • 3.975 mm (4)
  • 4.0 mm (12)
  • 4.25 mm (12)
  • 4.3 mm (8)
  • 4.5 mm (12)
  • 4.525 mm (8)
  • 4.601 mm (4)
  • 4.7 mm (10)
  • 4.775 mm (12)
  • 4.801 mm (12)
  • 4.875 mm (4)
  • 4.9 mm (4)
  • 4.95 mm (8)
  • 5.0 mm (4)
  • 5.125 mm (4)
  • 5.4 mm (4)
  • 5.5 mm (4)
  • 5.575 mm (4)
  • 6.0 mm (4)
  • 6.351 mm (4)
  • 6.476 mm (4)
Cutting Width Min to Cutting Width Max
Insert Size
Insert Size
  • 2 (6)
  • 3 (8)
  • 4 (4)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.21 in (5)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 5.325 mm (5)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (12)
  • B L (8)
  • C N (12)
  • D P (10)
  • H T (18)
  • H W (18)
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

NE 90° • 鋼 NE 90° • 鋼

(18 Products)
  • シャンク — KM-TS ISO 26622シャンク — KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • クーラント — スルークーラント 最大100 bar（1500 psi）クーラント — スルークーラント 最大100 bar（1500 psi）
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
3790584 KM50TSS12ENEL2 KM50TSS12ENEL2 18.5000 .7283 11.0000 .4331 42.0100 1.653 70.0000 2.755 NG2R 0.44 0.97
    定価:
    $519.43 /各
    価格::
    3790585 KM50TSS12ENER2 KM50TSS12ENER2 18.5000 .7283 11.0000 .4331 42.0100 1.653 70.0000 2.755 NG2L 0.44 0.97
      定価:
      $519.43 /各
      価格::
      3790291 KM50TSS16FNEL2 KM50TSS16FNEL2 20.0000 .7874 11.0000 .4331 56.1600 2.211 80.0000 3.149 NG2R 0.44 0.97
        定価:
        $519.43 /各
        価格::
        3790583 KM50TSS16FNER2 KM50TSS16FNER2 20.0000 .7874 11.0000 .4331 56.1600 2.211 80.0000 3.149 NG2L 0.44 0.97
          定価:
          $519.43 /各
          価格::
          3790586 KM50TSS20HNEL2 KM50TSS20HNEL2 25.0000 .9843 13.0000 .5118 70.3200 2.768 100.0000 3.937 NG2R 0.58 1.28
            定価:
            $519.43 /各
            価格::
            3790587 KM50TSS20HNER2 KM50TSS20HNER2 25.0000 .9843 13.0000 .5118 70.3200 2.768 100.0000 3.937 NG2L 0.58 1.28
              定価:
              $519.43 /各
              価格::
              3790588 KM50TSS25JNEL3 KM50TSS25JNEL3 34.0000 1.338 17.0000 .6693 88.1100 3.468 110.0000 4.330 NG3R 0.67 1.48
                定価:
                $519.43 /各
                価格::
                3790589 KM50TSS25JNER3 KM50TSS25JNER3 34.0000 1.338 17.0000 .6693 88.1100 3.468 110.0000 4.330 NG3L 0.67 1.48
                  定価:
                  $519.43 /各
                  価格::
                  3790590 KM50TSS32GNEL3 KM50TSS32GNEL3 40.0000 1.574 22.0000 .8661 70.4700 2.774 90.0000 3.543 NG3R 0.71 1.57
                    定価:
                    $519.43 /各
                    価格::
                    3790591 KM50TSS32GNER3 KM50TSS32GNER3 40.0000 1.574 22.0000 .8661 70.4700 2.774 90.0000 3.543 NG3L 0.71 1.57
                      定価:
                      $519.43 /各
                      価格::
                      3790592 KM50TSS32KNEL3 KM50TSS32KNEL3 40.0000 1.574 22.0000 .8661 96.2600 3.789 125.0000 4.921 NG3R 0.97 2.14
                        この品目はありません
                        この品目は、代理店経由で入手できる場合があります
                        価格::
                        3790593 KM50TSS32KNER3 KM50TSS32KNER3 40.0000 1.574 22.0000 .8661 96.2600 3.789 125.0000 4.921 NG3L 0.97 2.14
                          定価:
                          $519.43 /各
                          価格::
                          3790594 KM50TSS40JNEL4 KM50TSS40JNEL4 50.0000 1.968 27.0000 1.063 91.2600 3.592 110.0000 4.330 NG4R 1.09 2.41
                            定価:
                            $519.43 /各
                            価格::
                            3790595 KM50TSS40JNER4 KM50TSS40JNER4 50.0000 1.969 27.0000 1.063 91.2600 3.593 110.0000 4.331   1.09 2.41
                              定価:
                              $519.43 /各
                              価格::
                              3790596 KM50TSS40LNEL3 KM50TSS40LNEL3 50.0000 1.968 27.0000 1.063 120.3400 4.737 140.0000 5.511 NG3R 1.40 3.09
                                この品目はありません
                                この品目は、代理店経由で入手できる場合があります
                                価格::
                                3790597 KM50TSS40LNEL4 KM50TSS40LNEL4 50.0000 1.968 27.0000 1.063 120.3400 4.737 140.0000 5.511 NG4R 1.39 3.06
                                  定価:
                                  $519.43 /各
                                  価格::
                                  3790598 KM50TSS40LNER3 KM50TSS40LNER3 50.0000 1.968 27.0000 1.063 120.3400 4.737 140.0000 5.511 NG3L 1.40 3.09
                                    定価:
                                    $519.43 /各
                                    価格::
                                    3790599 KM50TSS40LNER4 KM50TSS40LNER4 50.0000 1.968 27.0000 1.063 120.3400 4.737 140.0000 5.511 NG4L 1.39 3.06
                                      定価:
                                      $519.43 /各
                                      価格::
                                      定価:
                                      割引: %
                                      価格::
                                      配置転換 この品目はありません
                                      交換品 この品目は、代理店経由で入手できる場合があります
                                      product-image
                                      Please adjust the following properties from

                                      ISO製品型番

                                      ANSI製品型番

                                      to find similar products.
                                      複製を作成しようとしています . 続行しますか?
                                      削除しようとしています 続行しますか?
                                      の名前を何に変更しますか?
                                      有効な名前を入力してください
                                      重複の名前を入力してください
                                      有効な名前を入力してください
                                      マイソリューションページにを追加しようとしています. 続行しますか?
                                      有効な名前を入力してください
                                      次のコピーを送信

                                      有効なメールアドレスを入力してください
                                      有効な名前を入力してください

                                      次のCAD図面が見つかりました

                                      お探しのファイルを一括して選択してダウンロードできます

                                      お探しの種類のファイルが見つかりませんか?
                                      図面請求 »

                                      ダッシュボード情報を表示するには、ログインする必要があります
                                      Session expired due to inactivity, please login again
                                      カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
                                      アイテムがカートに正常に追加されました
                                      カートを表示
                                      DOWNLOAD TYPE:



                                      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                      SAP Material Number ISO製品型番 材種    
                                      Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                                      You are about to leave the Solution building process.

                                      Are you sure you want to leave?