提案製品

Product Family suggestions

がカートに正常に追加されました
カートを表示

通知

すべて既読にする
Mobile Menu

P-Clamping ID

フィルタを選択
Filters
フィルタ
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (24)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (24)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (24)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (24)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (24)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (24)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (24)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (24)
  • M Stainless Steel (24)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (24)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (24)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (24)
  • K Cast Iron (24)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (24)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (24)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (24)
  • N Non-Ferrous Materials (24)
    • N1
      Wrought Aluminum
      (24)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (24)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (16)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (24)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (24)
    • N6
      Carbon, Graphite Composites, CFRP
      (22)
    • N7
      MMC's
      (24)
  • S High-Temp Alloys (24)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (24)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (24)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (24)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (24)
  • H Hardened Materials (22)
    • H1
      Hardened Materials 44-48 HRC
      (22)
    • H2
      Hardened Materials 48-55 HRC
      (22)
    • H3
      Hardened Materials 56-60 HRC
      (22)
    • H4
      Hardened Materials >60 HRC
      (22)
Applications
Applications
  • Facing Facing (24)
  • Multiple Direction Cutting Multiple Direction Cutting (24)
  • Profiling Profiling (13)
  • TRN Boring TRN Boring (13)
  • Turning Turning (24)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (24)
  • Interrupted (22)
  • Lightly Interrupted Cut (24)
  • Smooth Cut (24)
  • Varying Depth of Cut (24)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 93.0 (8)
  • 95.0 (16)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (22)
  • 2.0 (16)
  • 3.0 (8)
  • 4.0 (16)
  • 6.0 (8)
  • 8.0 (8)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (24)
  • 0.008 in (18)
  • 0.014 in (6)
  • 0.016 in (24)
  • 0.024 in (8)
  • 0.031 in (24)
  • 0.047 in (24)
  • 0.062 in (8)
  • 0.063 in (22)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (24)
  • 0.2 mm (18)
  • 0.351 mm (6)
  • 0.4 mm (24)
  • 0.601 mm (8)
  • 0.8 mm (24)
  • 1.201 mm (24)
  • 1.576 mm (8)
  • 1.6 mm (22)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (14)
  • 241 (8)
  • CL4 (14)
  • CM2 (14)
  • CM3 (14)
  • CM4 (8)
  • CPX (14)
  • CW2 (14)
  • CW2015 (14)
  • CW5025 (22)
  • GX (8)
  • HK1500 (22)
  • HT2 (16)
  • HTX (8)
  • K060 (8)
  • K090 (14)
  • K1 (8)
  • K10M (22)
  • K10P (22)
  • K10U (22)
  • K15U (22)
  • K20K (22)
  • K21 (8)
  • K25M (24)
  • K25P (22)
  • K313 (24)
  • K35P (14)
  • K420 (8)
  • K45 (8)
  • K68 (14)
  • KB1340 (10)
  • KB1345 (8)
  • KB1610 (16)
  • KB1625 (8)
  • KB1630 (8)
  • KB5610 (16)
  • KB5625 (8)
  • KB5630 (8)
  • KB9610 (22)
  • KB9640 (18)
  • KBH10 (22)
  • KBH10B (14)
  • KBH20 (22)
  • KBH20B (14)
  • KBK35 (8)
  • KC210 (14)
  • KC250 (8)
  • KC5010 (24)
  • KC5025 (24)
  • KC5410 (22)
  • KC5510 (24)
  • KC5525 (24)
  • KC710 (8)
  • KC720 (16)
  • KC722 (8)
  • KC725M (8)
  • KC730 (18)
  • KC7310 (24)
  • KC732 (16)
  • KC8050 (24)
  • KC810 (24)
  • KC850 (24)
  • KC9010 (24)
  • KC9025 (24)
  • KC910 (22)
  • KC9105 (24)
  • KC9110 (24)
  • KC9120 (24)
  • KC9125 (24)
  • KC9140 (24)
  • KC9145 (22)
  • KC9210 (6)
  • KC9215 (24)
  • KC9225 (24)
  • KC9240 (24)
  • KC9240NEW (24)
  • KC9245 (24)
  • KC9315 (24)
  • KC9320 (24)
  • KC9325 (24)
  • KC935 (24)
  • KC950 (22)
  • KC990 (24)
  • KCK05 (24)
  • KCK05B (24)
  • KCK15 (24)
  • KCK15B (24)
  • KCK20 (24)
  • KCK20B (24)
  • KCM15 (24)
  • KCM15B (24)
  • KCM25 (24)
  • KCM25B (24)
  • KCM35 (22)
  • KCM35B (22)
  • KCP05 (24)
  • KCP05B (24)
  • KCP10 (24)
  • KCP10B (24)
  • KCP25 (24)
  • KCP25B (24)
  • KCP25C (24)
  • KCP30 (24)
  • KCP30B (22)
  • KCP40 (22)
  • KCP40B (22)
  • KCPK05 (24)
  • KCS10 (8)
  • KCS10B (24)
  • KCU10 (24)
  • KCU25 (24)
  • KD050 (8)
  • KD081 (8)
  • KD100 (8)
  • KD120 (8)
  • KD1400 (16)
  • KD1405 (8)
  • KD1425 (16)
  • KM1 (8)
  • KMF (8)
  • KS15 (8)
  • KT1120 (8)
  • KT125 (14)
  • KT150 (8)
  • KT175 (14)
  • KT315 (24)
  • KT325 (16)
  • KU10T (24)
  • KU30T (24)
  • KY1310 (16)
  • KY1320 (22)
  • KY1540 (8)
  • KY1615 (14)
  • KY2000 (8)
  • KY2100 (8)
  • KY3000 (14)
  • KY3400 (16)
  • KY3500 (22)
  • KY4000 (8)
  • KY4300 (8)
  • KY4400 (22)
  • KYHK15B (22)
  • KYK10 (16)
  • KYK25 (16)
  • KYK35 (22)
  • KYS25 (8)
  • KYS30 (16)
  • NL200 (14)
  • NL250 (24)
  • NL300 (14)
  • NL400 (16)
  • NL920 (24)
  • P25 (8)
  • PB100 (8)
  • PB170 (8)
  • PB250 (8)
  • PB300 (8)
  • PS5 (16)
  • SP0819 (22)
  • SP3019 (22)
  • SP4019 (16)
  • THM (8)
  • THM-X (14)
  • THMF-X (8)
  • TN10P (24)
  • TN10U (22)
  • TN15M (22)
  • TN15U (22)
  • TN2000 (22)
  • TN20K (22)
  • TN20P (24)
  • TN30M (24)
  • TN30P (22)
  • TN4000 (22)
  • TN5015 (24)
  • TN5020 (24)
  • TN5105 (24)
  • TN5120 (24)
  • TN6010 (14)
  • TN6025 (22)
  • TN7005 (24)
  • TN7010 (24)
  • TN7015 (24)
  • TN7025 (24)
  • TN7035 (22)
  • TN7105 (24)
  • TN7110 (24)
  • TN7115 (24)
  • TN7125 (24)
  • TN7135 (22)
  • TN8025 (24)
  • TTI15 (16)
  • TTR (8)
  • TTS (14)
  • TTX (14)
  • WBH10C (22)
  • WBH10P (8)
  • WBH10U (16)
  • WBH20P (22)
  • WBH25P (8)
  • WBH25U (14)
  • WBH30P (8)
  • WBK40U (10)
  • WBK45U (14)
  • WDN00U (8)
  • WDN25U (16)
  • WK05CT (24)
  • WK15CT (22)
  • WK20CT (24)
  • WM15CT (24)
  • WM25CT (24)
  • WM35CT (24)
  • WP05CT (16)
  • WP15CT (24)
  • WP20TT (2)
  • WP25CT (24)
  • WP35CT (24)
  • WS10PT (24)
  • WS25PT (24)
  • WU10HT (24)
  • WU10PT (24)
  • WU25PT (24)
  • X00511 (8)
  • X00580 (8)
  • X00581 (8)
  • X00582 (8)
  • X00583 (8)
  • X00584 (8)
  • X00585 (8)
  • X00586 (8)
  • X00591 (8)
  • X00592 (8)
  • X00593 (8)
  • X00594 (8)
  • X00596 (8)
  • X00597 (8)
  • X00599 (8)
Hand Of Tool
Hand Of Tool
  • L (12)
  • R (12)
Wiper Insert
Wiper Insert
  • N (24)
  • Y (24)
F Dimension
F Dimension
  • 17.0 mm (6)
  • 22.0 mm (6)
  • 27.0 mm (7)
  • 35.0 mm (5)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.669 in (6)
  • 0.866 in (6)
  • 1.063 in (7)
  • 1.379 in (5)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 32.0 mm (6)
  • 40.0 mm (6)
  • 50.0 mm (7)
  • 63.0 mm (5)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.26 in (6)
  • 1.575 in (6)
  • 1.969 in (7)
  • 2.48 in (5)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (16)
  • E (8)
Maximum Bore Depth
Maximum Bore Depth
  • 3.473 in (4)
  • 3.485 in (2)
  • 4.412 in (6)
  • 4.464 in (1)
  • 4.612 in (5)
  • 4.621 in (1)
  • 5.883 in (5)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 88.226 mm (4)
  • 88.525 mm (2)
  • 112.075 mm (6)
  • 113.375 mm (1)
  • 117.15 mm (5)
  • 117.375 mm (1)
  • 149.4 mm (5)
Maximum Bore Depth Min to Maximum Bore Depth Max
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (8)
  • D-DIAMOND/RHOMBIC 55 (8)
  • W-TRIGON 80 (8)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (24)
  • B L (22)
  • C A (22)
  • C N (22)
  • D P (22)
  • H T (24)
  • H W (24)
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

PWLN 95° • KM63TS™ PWLN 95° • KM63TS™

P-Clamping
(8 Products)
  • シャンク — KM-TS ISO 26622シャンク — KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • クーラント — スルークーラント 最大100 bar（1500 psi）クーラント — スルークーラント 最大100 bar（1500 psi）
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
2408040 KM63TSS25KPWLNL08 KM63TSS25KPWLNL08 32.0000 1.260 17.0000 .6690 88.2300 3.474 125.0000 4.920 WN..080408/WN..432 1.14 2.52
    定価:
    $569.00 /各
    価格::
    2408039 KM63TSS25KPWLNR08 KM63TSS25KPWLNR08 32.0000 1.260 17.0000 .6690 88.2300 3.474 125.0000 4.920 WN..080408/WN..432 1.14 2.52
      定価:
      $569.00 /各
      価格::
      2408042 KM63TSS32LPWLNL08 KM63TSS32LPWLNL08 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 WN..080408/WN..432 1.36 2.99
        定価:
        $569.00 /各
        価格::
        2408041 KM63TSS32LPWLNR08 KM63TSS32LPWLNR08 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 WN..080408/WN..432 1.36 2.99
          定価:
          $569.00 /各
          価格::
          2408044 KM63TSS40LPWLNL08 KM63TSS40LPWLNL08 50.0000 1.969 27.0000 1.063 117.1400 4.612 140.0000 5.512 WN..080408/WN..432 1.67 3.67
            この品目はありません
            この品目は、代理店経由で入手できる場合があります
            価格::
            2408046 KM63TSS50PPWLNL08 KM63TSS50PPWLNL08 63.0000 2.480 35.0000 1.378 149.4000 5.882 170.0000 6.693 WN..080408/WN..432 2.61 5.75
              この品目はありません
              この品目は、代理店経由で入手できる場合があります
              価格::
              定価:
              割引: %
              価格::
              配置転換 この品目はありません
              交換品 この品目は、代理店経由で入手できる場合があります

              オリジナル製品

              PDUN 93° • KM63TS™ PDUN 93° • KM63TS™

              P-Clamping
              (8 Products)
              • シャンク — KM-TS ISO 26622シャンク — KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • クーラント — スルークーラント 最大100 bar（1500 psi）クーラント — スルークーラント 最大100 bar（1500 psi）
              製品を表示
              SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
              2257147 KM63TSS25KPDUNL11 KM63TSS25KPDUNL11 32.0000 1.260 17.0000 .6690 88.5200 3.485 125.0000 4.920 DN..110408/DN..332 1.13 2.50
                定価:
                $569.00 /各
                価格::
                2407985 KM63TSS25KPDUNR11 KM63TSS25KPDUNR11 32.0000 1.260 17.0000 .6690 88.5200 3.485 125.0000 4.920 DN..110408/DN..332 1.13 2.50
                  定価:
                  $569.00 /各
                  価格::
                  2407987 KM63TSS32LPDUNL15 KM63TSS32LPDUNL15 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 DN..150608/DN..442 1.35 2.97
                    定価:
                    $569.00 /各
                    価格::
                    2407986 KM63TSS32LPDUNR15 KM63TSS32LPDUNR15 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 DN..150608/DN..442 1.35 2.97
                      定価:
                      $569.00 /各
                      価格::
                      2407991 KM63TSS50PPDUNL15 KM63TSS50PPDUNL15 63.0000 2.480 35.0000 1.378 149.4000 5.882 170.0000 6.693 DN..150608/DN..442 2.73 6.03
                        定価:
                        $569.00 /各
                        価格::
                        2407990 KM63TSS50PPDUNR15 KM63TSS50PPDUNR15 63.0000 2.480 35.0000 1.378 149.4000 5.866 170.0000 6.693 DN..150608/DN..442 2.73 6.03
                          定価:
                          $569.00 /各
                          価格::
                          定価:
                          割引: %
                          価格::
                          配置転換 この品目はありません
                          交換品 この品目は、代理店経由で入手できる場合があります

                          オリジナル製品

                          PCLN 95° • KM63TS™ PCLN 95° • KM63TS™

                          P-Clamping
                          (8 Products)
                          • シャンク — KM-TS ISO 26622シャンク — KM-TS ISO 26622
                          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                          • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                          • クーラント — スルークーラント 最大100 bar（1500 psi）クーラント — スルークーラント 最大100 bar（1500 psi）
                          製品を表示
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
                          2407962 KM63TSS25KPCLNL12 KM63TSS25KPCLNL12 32.0000 1.260 17.0000 .6690 88.2300 3.474 125.0000 4.920 CN..120408/CN..432 1.13 2.50
                            定価:
                            $569.00 /各
                            価格::
                            2407964 KM63TSS32LPCLNL12 KM63TSS32LPCLNL12 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 CN..120408/CN..432 1.36 3.00
                              定価:
                              $569.00 /各
                              価格::
                              2407963 KM63TSS32LPCLNR12 KM63TSS32LPCLNR12 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 CN..120408/CN..432 1.36 3.00
                                定価:
                                $569.00 /各
                                価格::
                                2407966 KM63TSS40LPCLNL12 KM63TSS40LPCLNL12 50.0000 1.969 27.0000 1.063 117.1400 4.612 140.0000 5.512 CN..120408/CN..432 1.68 3.69
                                  定価:
                                  $569.00 /各
                                  価格::
                                  2407965 KM63TSS40LPCLNR12 KM63TSS40LPCLNR12 50.0000 1.969 27.0000 1.063 117.1400 4.612 140.0000 5.512 CN..120408/CN..432 1.68 3.69
                                    定価:
                                    $569.00 /各
                                    価格::
                                    2407967 KM63TSS50PPCLNR12 KM63TSS50PPCLNR12 63.0000 2.480 35.0000 1.378 149.4000 5.882 170.0000 6.693 CN..120408/CN..432 2.67 5.89
                                      定価:
                                      $569.00 /各
                                      価格::
                                      定価:
                                      割引: %
                                      価格::
                                      配置転換 この品目はありません
                                      交換品 この品目は、代理店経由で入手できる場合があります
                                      product-image
                                      Please adjust the following properties from

                                      ISO製品型番

                                      ANSI製品型番

                                      to find similar products.
                                      複製を作成しようとしています . 続行しますか?
                                      削除しようとしています 続行しますか?
                                      の名前を何に変更しますか?
                                      有効な名前を入力してください
                                      重複の名前を入力してください
                                      有効な名前を入力してください
                                      マイソリューションページにを追加しようとしています. 続行しますか?
                                      有効な名前を入力してください
                                      次のコピーを送信

                                      有効なメールアドレスを入力してください
                                      有効な名前を入力してください

                                      次のCAD図面が見つかりました

                                      お探しのファイルを一括して選択してダウンロードできます

                                      お探しの種類のファイルが見つかりませんか?
                                      図面請求 »

                                      ダッシュボード情報を表示するには、ログインする必要があります
                                      Session expired due to inactivity, please login again
                                      カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
                                      アイテムがカートに正常に追加されました
                                      カートを表示
                                      DOWNLOAD TYPE:



                                      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                      SAP Material Number ISO製品型番 材種    
                                      Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                                      You are about to leave the Solution building process.

                                      Are you sure you want to leave?