オンラインでご注文
successfully added to cart
View Cart
コロナウィルスCOVID-19: ルの対応について

詳細を見る

WGC – 溝入れ加工工具と突っ切り加工工具

WGC

溝入れ：

  • ほとんどのワーク材の外径溝入れアプリケーションの第1選択 
  • スルークーラント機能と効率的なクーラント供給により、生産性を向上 
  • 溝幅：2～10 mm（0.084"～0.399"）
WGC

突っ切り：

  • 効率的な突っ切り加工と深溝入れ加工用に特別に設計されたチップブレーカー 
  • ポジのブレーカー形状により、切削抵抗を低減
  • 溝幅：1.4～8 mm（0.055"～0.315"）
WGC

プロファイル加工：

  • 複雑な輪郭を生成する多方向旋削用フルRチップブレーカー 
  • 剛性の高い設計により、滑らかな表面仕上げを実現 
  • 2～8 mm（0.079"～0.315"）

Advances – インチ（2020）

デジタルカタログを表示

Advances – メトリック（2020）

デジタルカタログを表示

 

 

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (359)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (359)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (359)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (359)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (359)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (359)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (359)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (359)
  • M Stainless Steel (359)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (359)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (359)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (359)
  • K Cast Iron (351)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (351)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (351)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (351)
  • N Non-Ferrous Materials (351)
    • N1
      Wrought Aluminum
      (351)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (351)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (351)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (351)
    • N6
      Carbon, Graphite Composites, CFRP
      (351)
  • S High-Temp Alloys (359)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (359)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (359)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (359)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (359)
  • H Hardened Materials (123)
    • H1
      Hardened Materials 44-48 HRC
      (123)
    • H2
      Hardened Materials 48-55 HRC
      (123)
Select First Choice
  • CN (38)
  • DE (53)
  • IN (1)
  • US (22)
Applications
  • Back Boring Back Boring (104)
  • Boring Boring (9)
  • Chamfer Turning Chamfer Turning (50)
  • Cut-Off Cut-Off (283)
  • Deep Grooving Deep Grooving (20)
  • Face Grooving Face Grooving (125)
  • Facing Facing (141)
  • Grooving Grooving (141)
  • ID Facing ID Facing (104)
  • ID Grooving ID Grooving (83)
  • ID Thread Turning ID Thread Turning (50)
  • Multiple Direction Cutting Multiple Direction Cutting (50)
  • OD Thread Turning OD Thread Turning (50)
  • Plunge Turning Plunge Turning (113)
  • Profiling Profiling (141)
  • TRN Boring TRN Boring (50)
  • Turning Turning (141)
Cutting Condition
  • Heavily Interrupted Cut (253)
  • Lightly Interrupted Cut (253)
  • Smooth Cut (253)
  • Varying Depth of Cut (253)
Tool Cutting Edge Angle
  • 90.0 (205)
to
Connection Style
  • Cutoff Support Blade A1-A3 (15)
  • Toolholder (144)
Cutting Edges Per Insert
  • 1.0 (315)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.08 (26)
  • 0.102 (89)
  • 0.15 (45)
  • 0.2 (147)
  • 0.202 (37)
  • 0.203 (125)
  • 0.3 (61)
  • 0.318 (69)
  • 0.4 (175)
  • 0.78 (37)
  • 0.8 (130)
  • 1.0 (40)
  • 1.19 (33)
  • 1.2 (37)
  • 1.5 (39)
  • 1.59 (39)
  • 2.0 (37)
  • 2.38 (37)
  • 2.5 (26)
  • 3.0 (32)
  • 3.175 (32)
  • 3.96 (23)
  • 4.0 (23)
to
Corner Radius
  • 0.004 (89)
  • 0.0057 (3)
  • 0.0059 (40)
  • 0.006 (4)
  • 0.0077 (40)
  • 0.0078 (40)
  • 0.0079 (40)
  • 0.008 (153)
  • 0.009 (40)
  • 0.012 (61)
  • 0.0125 (32)
  • 0.015 (37)
  • 0.0157 (101)
  • 0.0158 (37)
  • 0.016 (141)
  • 0.031 (122)
  • 0.0314 (37)
  • 0.0315 (119)
  • 0.032 (96)
  • 0.039 (40)
  • 0.0463 (23)
  • 0.047 (38)
  • 0.0472 (9)
  • 0.059 (39)
  • 0.062 (39)
  • 0.0787 (40)
  • 0.079 (76)
  • 0.094 (37)
  • 0.098 (26)
  • 0.118 (32)
  • 0.125 (69)
  • 0.156 (23)
  • 0.1575 (23)
to
application
Drilling Condition
  • Heavily Interrupted Cut (54)
  • Lightly Interrupted Cut (54)
  • Smooth Cut (54)
  • Varying Depth of Cut (54)
Grade Of Cutting Tool
  • WU10PT (123)
  • WU25PT (341)
  • WU35PT (85)
Hand Of Tool
  • L (72)
  • N (15)
  • R (72)
Wiper Insert
  • N (315)
Minimum Axial Groove Diameter
  • 2.25 (12)
to
Minimum Axial Groove Diameter
  • 57.15 (12)
to
Maximum Axial Groove Diameter
  • 20.0 (4)
  • 32.0 (24)
  • 406.4 (12)
to
Maximum Axial Groove Diameter
  • 0.787 (4)
  • 1.26 (24)
  • 16.0 (12)
to
Cutting Direction
  • E (159)
frontEnd
Clamp Style
  • C (12)
  • S (28)
  • Y (131)
Insert Shape
  • PRISMATIC (363)
Cutting Width
  • 1.4 (8)
  • 1.404 (4)
  • 2.0 (50)
  • 2.125 (41)
  • 2.387 (43)
  • 2.388 (49)
  • 2.5 (40)
  • 2.51 (40)
  • 2.511 (40)
  • 3.0 (51)
  • 3.125 (42)
  • 3.175 (58)
  • 3.176 (41)
  • 3.301 (40)
  • 3.302 (40)
  • 4.0 (48)
  • 4.125 (40)
  • 4.75 (38)
  • 4.754 (37)
  • 4.761 (37)
  • 4.762 (40)
  • 4.763 (40)
  • 4.877 (38)
  • 4.878 (38)
  • 5.0 (31)
  • 5.125 (29)
  • 6.0 (36)
  • 6.125 (35)
  • 6.35 (35)
  • 6.477 (33)
  • 6.478 (33)
  • 7.125 (32)
  • 7.92 (23)
  • 7.925 (23)
  • 8.0 (25)
  • 8.051 (23)
  • 8.052 (23)
  • 8.125 (26)
  • 9.525 (9)
  • 9.651 (10)
  • 10.125 (10)
to
Cutting Width
  • 0.055 (10)
  • 0.0787 (40)
  • 0.0788 (40)
  • 0.079 (48)
  • 0.0837 (41)
  • 0.094 (53)
  • 0.0984 (40)
  • 0.0988 (40)
  • 0.099 (40)
  • 0.118 (46)
  • 0.1181 (41)
  • 0.1182 (40)
  • 0.123 (42)
  • 0.125 (61)
  • 0.13 (42)
  • 0.157 (41)
  • 0.1575 (42)
  • 0.158 (37)
  • 0.162 (37)
  • 0.1624 (39)
  • 0.187 (38)
  • 0.1872 (37)
  • 0.1875 (45)
  • 0.192 (39)
  • 0.1921 (37)
  • 0.1968 (28)
  • 0.1969 (26)
  • 0.197 (27)
  • 0.2018 (29)
  • 0.236 (32)
  • 0.2362 (35)
  • 0.241 (32)
  • 0.2411 (34)
  • 0.25 (35)
  • 0.255 (35)
  • 0.281 (32)
  • 0.312 (24)
  • 0.315 (25)
  • 0.317 (24)
  • 0.3199 (26)
  • 0.375 (9)
  • 0.38 (10)
  • 0.3986 (10)
to
Maximum Cutting Depth
  • 10.0 (4)
  • 12.0 (10)
  • 14.0 (1)
  • 15.0 (1)
  • 16.0 (65)
  • 17.0 (1)
  • 19.05 (4)
  • 20.0 (1)
  • 22.0 (16)
  • 25.4 (8)
  • 26.0 (46)
  • 30.0 (1)
  • 32.0 (26)
  • 40.0 (14)
  • 50.0 (3)
  • 60.0 (3)
  • 120.0 (1)
to
Maximum Cutting Depth
  • 0.394 (4)
  • 0.4724 (10)
  • 0.5512 (1)
  • 0.5906 (1)
  • 0.6299 (21)
  • 0.63 (44)
  • 0.669 (1)
  • 0.75 (4)
  • 0.7875 (1)
  • 0.866 (8)
  • 0.8661 (8)
  • 1.0 (8)
  • 1.0236 (23)
  • 1.024 (23)
  • 1.1812 (1)
  • 1.2598 (16)
  • 1.26 (10)
  • 1.5748 (7)
  • 1.575 (6)
  • 1.5752 (1)
  • 1.9671 (1)
  • 1.9686 (1)
  • 1.969 (1)
  • 2.3622 (3)
  • 4.7244 (1)
to
Insert Size
  • 10 (8)
  • 2 (16)
  • 3 (16)
  • 4 (24)
  • 5 (16)
  • 6 (20)
  • 8 (16)
Cartridge Size
  • 50 (24)
  • 65 (10)
Gage Length
  • 69.7800 (2)
  • 82.4800 (2)
  • 83.9300 (1)
  • 95.3600 (3)
  • 101.7100 (1)
  • 107.8800 (1)
  • 138.1500 (2)
  • 138.7500 (2)
  • 139.2500 (2)
  • 139.9000 (6)
  • 140.4000 (8)
  • 140.5500 (2)
  • 150.0000 (2)
  • 151.4600 (3)
  • 152.4000 (4)
  • 158.1500 (2)
  • 158.7500 (2)
  • 159.2500 (2)
  • 165.9500 (2)
  • 170.0000 (2)
  • 171.4500 (3)
  • 177.8000 (2)
Gage Length
  • 2.7470 (2)
  • 3.2470 (2)
  • 3.3040 (1)
  • 3.7540 (3)
  • 4.0040 (1)
  • 4.2470 (1)
  • 5.4390 (2)
  • 5.4626 (2)
  • 5.4823 (2)
  • 5.5000 (12)
  • 5.5079 (1)
  • 5.5276 (2)
  • 5.5300 (1)
  • 5.9055 (2)
  • 5.9630 (3)
  • 6.0000 (4)
  • 6.2264 (2)
  • 6.2500 (2)
  • 6.2697 (2)
  • 6.5000 (2)
  • 6.6929 (2)
  • 6.7500 (3)
  • 7.0000 (2)
insertGeometry
Shape
  • PRISMATIC (158)
Insert Seat Size
  • 10 (5)
  • 1B (8)
  • 2 (30)
  • 3 (44)
  • 4 (32)
  • 5 (10)
  • 6 (18)
  • 8 (11)
Cutting Tool Material
  • H W (359)
backEnd
Connection Type
  • CUTOFF BLADE (15)
  • SQUARE SHANK (144)
Back-End Diameter
  • 1.0 (1)
  • 1.25 (1)
  • 1.5 (1)
to
Back-End Diameter
  • 25.4 (1)
  • 31.7 (1)
  • 38.1 (1)
to
other
Grade
  • W (11)
  • WU10PT (10)
  • WU25PT (140)
  • WU35PT (8)
Platform
  • WGC (445)
Tool Unit
  • I (285)
  • M (318)
Over All Length [L]
  • 47.746 (5)
  • 47.75 (5)
  • 49.62 (4)
  • 51.746 (3)
  • 51.75 (1)
  • 57.746 (3)
  • 57.75 (1)
  • 58.42 (3)
  • 58.425 (1)
  • 59.62 (4)
  • 61.746 (1)
  • 61.75 (1)
  • 64.77 (8)
  • 65.62 (2)
  • 67.746 (3)
  • 67.75 (1)
  • 86.0 (1)
  • 90.25 (3)
  • 100.0 (4)
  • 108.46 (2)
  • 110.0 (2)
  • 110.25 (4)
  • 110.251 (1)
  • 114.3 (26)
  • 121.16 (2)
  • 125.0 (28)
  • 131.83 (1)
  • 138.75 (2)
  • 139.9 (6)
  • 143.26 (3)
  • 146.56 (1)
  • 149.61 (1)
  • 150.0 (26)
  • 150.25 (8)
  • 151.4 (6)
  • 151.76 (3)
  • 152.4 (48)
  • 158.75 (2)
  • 160.0 (2)
  • 170.0 (22)
  • 170.25 (2)
  • 177.8 (10)
  • 200.0 (6)
  • 260.0 (1)
to
Over All Length [L]
  • 1.8798 (5)
  • 1.8799 (5)
  • 1.9535 (3)
  • 1.9536 (1)
  • 2.0372 (3)
  • 2.0374 (1)
  • 2.2735 (4)
  • 2.3 (3)
  • 2.3002 (1)
  • 2.3472 (3)
  • 2.3473 (1)
  • 2.4309 (1)
  • 2.4311 (1)
  • 2.55 (8)
  • 2.5835 (2)
  • 2.6672 (3)
  • 2.6673 (1)
  • 3.3858 (1)
  • 3.5532 (1)
  • 3.5533 (2)
  • 3.937 (4)
  • 4.27 (2)
  • 4.3307 (2)
  • 4.3404 (1)
  • 4.3406 (2)
  • 4.3407 (2)
  • 4.5 (26)
  • 4.77 (2)
  • 4.921 (18)
  • 4.9213 (10)
  • 5.19 (1)
  • 5.4626 (2)
  • 5.5 (5)
  • 5.5079 (1)
  • 5.64 (3)
  • 5.77 (1)
  • 5.89 (1)
  • 5.9055 (21)
  • 5.906 (5)
  • 5.9152 (1)
  • 5.9153 (2)
  • 5.9154 (3)
  • 5.9155 (2)
  • 5.9606 (6)
  • 5.975 (3)
  • 6.0 (48)
  • 6.25 (2)
  • 6.2992 (2)
  • 6.6929 (20)
  • 6.693 (2)
  • 6.7028 (2)
  • 7.0 (10)
  • 7.874 (6)
  • 10.236 (1)
to
Insert Hand
  • L (133)
  • N (306)
  • R (150)
obsoleteFacet
  • true (445)
  • false (441)
Category Path
Drilling Condition Material
  • K-All (54)
  • M-All (54)
  • N-All (54)
  • P-All (54)
  • S-All (54)
Cutting Condition Material
  • K-All (253)
  • M-All (253)
  • N-All (253)
  • P-All (253)
  • S-All (253)
No filters matching ""
Narrow by category:
View Products in
Metric
Inch
溝入れおよび突っ切り • WGC

突っ切りインサート • F精密成形 • メトリック
(13 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Insert Size [W] Cutting Width [W] Cutting Width Cuttg Width (+/-) Tolerance Cuttg Width (+/-) Tolerance [LI] Insert Length [LI] Insert Length Cutting Edge Angle Right Hand Cutting Edge Angle Left Hand [RR] Corner Radius [RR] Corner Radius [RL] Corner Radius [RL] Corner Radius
6470548 WC020M02N00F02 WC020M02N00F02   WU25PT 2 2.0000 .0790 0.050000 .0020 9.0000 .3530     0.2000 .0080 0.2000 .0080
    6470549 WC020M02R06F02 WC020M02R06F02   WU25PT 2 2.0000 .0790 0.050000 .0020 9.0000 .3530 6.000       0.2000 .0080
      6470550 WC030M03L06F02 WC030M03L06F02   WU25PT 3 3.0000 .1180 0.075000 .0030 9.6000 .3780   6.000 0.2000 .0080    
        6470561 WC030M03N00F02 WC030M03N00F02   WU25PT 3 3.0000 .1182 0.075000 .0030 9.6300 .3791     0.2000 .0079 0.2000 .0079
          6470562 WC030M03R06F02 WC030M03R06F02   WU25PT 3 3.0000 .1180 0.075000 .0030 9.6000 .3780 6.000          
            6470564 WC040M04N00F02 WC040M04N00F02   WU25PT 4 4.0000 .1570 0.075000 .0030 10.1900 .4010     0.2000 .0080 0.2000 .0080
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              溝入れおよび突っ切り • WGC

              突っ切りインサート • M精密成形 • メトリック
              (15 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Insert Size [W] Cutting Width [W] Cutting Width Cuttg Width (+/-) Tolerance Cuttg Width (+/-) Tolerance [LI] Insert Length [LI] Insert Length Cutting Edge Angle Left Hand [RR] Corner Radius [RR] Corner Radius [RL] Corner Radius [RL] Corner Radius
              6461862 WC020M02N00M02 WC020M02N00M02   WU25PT 2 2.0000 .0790 0.050000 .0020 8.9800 .3530   0.2000 .0080 0.2000 .0080
                6461865 WC030M03N00M02 WC030M03N00M02   WU25PT 3 3.0000 .1180 0.075000 .0030 9.6000 .3780   0.2000 .0080 0.2000 .0080
                  6461868 WC040M04N00M02 WC040M04N00M02   WU25PT 4 4.0000 .1570 0.075000 .0030 10.2000 .4020   0.2000 .0080 0.2000 .0080
                    6461870 WC050M05N00M03 WC050M05N00M03   WU25PT 5 5.0000 .1970 0.075000 .0030 12.2500 .4820   0.3000 .0120 0.3000 .0120
                      6461882 WC080M08N00M04 WC080M08N00M04   WU25PT 8 8.0000 .3150 0.075000 .0030 17.4600 .6880   0.4000 .0160 0.4000 .0160
                        6461828 WC014M1BL06M02 WC014M1BL06M02   WU25PT 1B 1.4000 .0550 0.050000 .0020 9.0200 .3550 6.000     0.2000 .0080
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          溝入れおよび突っ切り • WGC

                          突っ切りインサート • R精密成形 • メトリック
                          (10 Products)
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Insert Size [W] Cutting Width [W] Cutting Width Cuttg Width (+/-) Tolerance Cuttg Width (+/-) Tolerance [LI] Insert Length [LI] Insert Length Cutting Edge Angle Right Hand Cutting Edge Angle Left Hand [RR] Corner Radius [RR] Corner Radius [RL] Corner Radius [RL] Corner Radius
                          6470427 WC020M02N00R02 WC020M02N00R02   WU25PT 2 2.0000 .0790 0.050000 .0020 8.9800 .3530     0.2000 .0080 0.2000 .0080
                            6470430 WC030M03N00R02 WC030M03N00R02   WU25PT 3 3.0000 .1181 0.075000 .0030 9.6000 .3780     0.2000 .0080 0.2000 .0080
                              6470461 WC030M03R06R02 WC030M03R06R02   WU25PT 3 3.0000 .1180 0.075000 .0030 9.6100 .3780 6.000       0.2000 .0080
                                6470426 WC020M02L06R02 WC020M02L06R02   WU25PT 2 2.0000 .0790 0.050000 .0020 8.9700 .3530   6.000 0.2000 .0080    
                                  6470428 WC020M02R06R02 WC020M02R06R02   WU25PT 2 2.0000 .0790 0.050000 .0020 8.9700 .3530 6.000       0.2000 .0080
                                    6470429 WC030M03L06R02 WC030M03L06R02   WU25PT 3 3.0000 .1180 0.075000 .0030 9.6100 .3780   6.000 0.2000 .0080    
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      溝入れおよび突っ切り • WGC

                                      溝入れインサート • PT精密成形 • メトリック
                                      (14 Products)
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Insert Size [W] Cutting Width [W] Cutting Width Cuttg Width (+/-) Tolerance Cuttg Width (+/-) Tolerance [RR] Corner Radius [RR] Corner Radius [LI] Insert Length [LI] Insert Length
                                      6461734 WG0212M02U02PT WG0212M02U02PT   WU25PT 2 2.1250 .0837 0.050000 .0020 0.2000 .0077 8.9700 .3530
                                        6461736 WG0312M03U02PT WG0312M03U02PT   WU25PT 3 3.1250 .1230 0.075000 .0030 0.2000 .0080 9.6000 .3780
                                          6461737 WG0312M03U04PT WG0312M03U04PT   WU25PT 3 3.1250 .1230 0.075000 .0030 0.4000 .0157 9.6000 .3780
                                            6461738 WG0412M04U04PT WG0412M04U04PT   WU25PT 4 4.1250 .1620 0.075000 .0030 0.4000 .0160 10.1900 .4010
                                              6461739 WG0412M04U08PT WG0412M04U08PT   WU25PT 4 4.1250 .1624 0.075000 .0030 0.8000 .0314 10.1900 .4010
                                                6461822 WG0612M06U04PT WG0612M06U04PT   WU25PT 6 6.1250 .2411 0.075000 .0030 0.4000 .0157 14.5900 .5750
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  溝入れおよび突っ切り • WGC

                                                  溝入れインサート • PN精密成形 • メトリック
                                                  (13 Products)
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Insert Size [W] Cutting Width [W] Cutting Width Cuttg Width (+/-) Tolerance Cuttg Width (+/-) Tolerance [RR] Corner Radius [RR] Corner Radius [LI] Insert Length [LI] Insert Length
                                                  6471042 WG0312M03U02PN WG0312M03U02PN   WU25PT 3 3.1250 .1230 0.075000 .0030 0.2000 .0080 9.6000 .3780
                                                    6471043 WG0312M03U04PN WG0312M03U04PN   WU25PT 3 3.1250 .1230 0.075000 .0030 0.4000 .0160 9.6000 .3780
                                                      6471045 WG0412M04U08PN WG0412M04U08PN   WU25PT 4 4.1250 .1624 0.075000 .0030 0.8000 .0310 10.2000 .4010
                                                        6471050 WG0812M08U08PN WG0812M08U08PN   WU25PT 8 8.1250 .3199 0.075000 .0030 0.8000 .0310 17.4600 .6870
                                                          6471064 WG1012M10U12PN WG1012M10U12PN   WU25PT 10 10.1250 .3986 0.075000 .0030 1.2000 .0470 20.7500 .8170
                                                            6470850 WG0212M02U02PN WG0212M02U02PN   WU25PT