M-スタイルクランプ • ネガスタイルインサート用

フィルタを選択
Filters
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (14)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (14)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (14)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (14)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (14)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (14)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (14)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (14)
  • M Stainless Steel (14)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (14)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (14)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (14)
  • K Cast Iron (16)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (16)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (16)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (16)
  • N Non-Ferrous Materials (13)
    • N1
      Wrought Aluminum
      (13)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (13)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (9)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (13)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (9)
    • N6
      Carbon, Graphite Composites, CFRP
      (9)
    • N7
      MMC's
      (9)
  • S High-Temp Alloys (16)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (16)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (16)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (16)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (14)
  • H Hardened Materials (15)
    • H1
      Hardened Materials 44-48 HRC
      (15)
    • H2
      Hardened Materials 48-55 HRC
      (15)
    • H3
      Hardened Materials 56-60 HRC
      (15)
    • H4
      Hardened Materials >60 HRC
      (15)
Applications
Applications
  • Facing Facing (7)
  • Multiple Direction Cutting Multiple Direction Cutting (10)
  • Profiling Profiling (15)
  • Turning Turning (16)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (14)
  • Lightly Interrupted Cut (14)
  • Smooth Cut (14)
  • Varying Depth of Cut (14)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (1)
  • 50.0 (2)
  • 60.0 (2)
  • 75.0 (1)
  • 93.0 (7)
  • 95.0 (3)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (9)
  • 2.0 (3)
  • 3.0 (10)
  • 4.0 (5)
  • 6.0 (10)
  • 8.0 (2)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (3)
  • 0.008 in (6)
  • 0.016 in (16)
  • 0.024 in (3)
  • 0.031 in (16)
  • 0.047 in (15)
  • 0.063 in (15)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (3)
  • 0.2 mm (6)
  • 0.4 mm (16)
  • 0.601 mm (3)
  • 0.8 mm (16)
  • 1.201 mm (15)
  • 1.6 mm (15)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CW2015 (12)
  • CW3020 (2)
  • CW5025 (11)
  • HK1500 (11)
  • PB100 (1)
  • PB170 (1)
  • PB250 (1)
  • PB300 (1)
  • SP0NTA (1)
  • THM (4)
  • THM-X (1)
  • THMF-X (4)
  • TN10P (14)
  • TN10U (14)
  • TN15M (13)
  • TN15U (13)
  • TN2000 (11)
  • TN20K (14)
  • TN20P (14)
  • TN30M (13)
  • TN30P (13)
  • TN4000 (11)
  • TN5015 (13)
  • TN5020 (11)
  • TN5105 (13)
  • TN5120 (13)
  • TN6010 (3)
  • TN6025 (7)
  • TN7005 (6)
  • TN7010 (14)
  • TN7015 (14)
  • TN7025 (14)
  • TN7035 (12)
  • TN7105 (7)
  • TN7110 (14)
  • TN7115 (14)
  • TN7125 (12)
  • TN7135 (12)
  • TN8025 (13)
  • TTI15 (1)
  • TTM (4)
  • TTM09 (7)
  • TTR (5)
  • TTS (4)
  • TTX (8)
  • WBH10C (6)
  • WBH10P (3)
  • WBH10U (9)
  • WBH20P (9)
  • WBH25P (6)
  • WBH25U (6)
  • WBH30P (3)
  • WBK40U (3)
  • WBK45U (6)
  • WDN00U (3)
  • WDN25U (9)
  • WK05CT (14)
  • WK15CT (7)
  • WK20CT (14)
  • WM15CT (13)
  • WM25CT (14)
  • WM35CT (13)
  • WP05CT (4)
  • WP15CT (14)
  • WP25CT (14)
  • WP35CT (13)
  • WS10PT (14)
  • WS25PT (13)
  • WU10HT (13)
  • WU10PT (7)
  • WU25PT (7)
Hand Of Tool
Hand Of Tool
  • L (4)
  • N (5)
  • R (7)
Wiper Insert
Wiper Insert
  • N (16)
  • Y (8)
F Dimension
F Dimension
  • 6.351 mm (1)
  • 9.525 mm (1)
  • 12.25 mm (1)
  • 12.701 mm (2)
  • 25.401 mm (5)
  • 31.75 mm (5)
  • 40.0 mm (1)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.25 in (1)
  • 0.375 in (1)
  • 0.482 in (1)
  • 0.5 in (2)
  • 1.0 in (5)
  • 1.25 in (5)
  • 1.575 in (1)
F Dimension Min to F Dimension Max
Cutting Direction
Cutting Direction
  • B (3)
  • E (1)
  • S (12)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (11)
  • NEGATIVE-ZERO (5)
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (3)
  • D-DIAMOND/RHOMBIC 55 (2)
  • S-SQUARE 90 (1)
  • T-TRIANGLE 60 (7)
  • W-TRIGON 80 (3)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (11)
  • B L (9)
  • C A (12)
  • C N (15)
  • D P (9)
  • H T (1)
  • H W (14)
backEnd
Shank Height
Shank Height
  • 0.5 in (1)
  • 0.75 in (6)
  • 1.0 in (7)
  • 1.26 in (2)
Shank Height Min to Shank Height Max
Shank Height
Shank Height
  • 12.701 mm (1)
  • 19.05 mm (6)
  • 25.401 mm (7)
  • 32.0 mm (2)
Shank Height Min to Shank Height Max
Shank Width
Shank Width
  • 0.5 in (1)
  • 0.75 in (6)
  • 0.984 in (1)
  • 1.0 in (7)
  • 1.26 in (1)
Shank Width Min to Shank Width Max
Shank Width
Shank Width
  • 12.701 mm (1)
  • 19.05 mm (6)
  • 25.0 mm (1)
  • 25.401 mm (7)
  • 32.0 mm (1)
Shank Width Min to Shank Width Max
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

Clamping System M
(1 Products)
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [L1A] L1 A Dimension [L1A] L1 A Dimension Inclination Angle [GAAO] Orthogonal Rake Angle Gage Insert
2951294 MCKNR164C MCKNR164C WG 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 30.734 1.210 3.0900 .1220 -5.000 -5.000 CN..432
    定価:
    $83.81 /各
    価格::
    数量
    定価:
    割引: %
    価格::
    配置転換 この品目はありません
    交換品 この品目は、代理店経由で入手できる場合があります
    数量

    販売包装単位

    オリジナル製品

    Clamping System M
    (2 Products)
    製品を表示
    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [GAAP] Axial Rake Angle Gage Insert
    3851318 MCMNN124B MCMNN124B WG 19.0500 .7500 19.0500 .7500 9.5200 .3748 114.3000 4.500 35.3010 1.389 -7.000 CN..432
      定価:
      $89.48 /各
      価格::
      数量
      3851319 MCMNN164D MCMNN164D WG 25.4000 1.000 25.4000 1.000 12.7000 .5000 152.4000 6.000 35.3010 1.389 -7.000 CN..432
        定価:
        $95.91 /各
        価格::
        数量
        定価:
        割引: %
        価格::
        配置転換 この品目はありません
        交換品 この品目は、代理店経由で入手できる場合があります
        数量

        販売包装単位

        オリジナル製品

        Clamping System M
        (2 Products)
        製品を表示
        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length Inclination Angle [GAAO] Orthogonal Rake Angle Gage Insert
        2953464 MDJNR124B MDJNR124B WG 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 35.0520 1.380 -5.000 -5.000 DN..432
          定価:
          $122.34 /各
          価格::
          数量
          2953465 MDJNR164C MDJNR164C WG 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 31.496 1.240 -5.000 -5.000 DN..432
            定価:
            $124.49 /各
            価格::
            数量
            定価:
            割引: %
            価格::
            配置転換 この品目はありません
            交換品 この品目は、代理店経由で入手できる場合があります
            数量

            販売包装単位

            オリジナル製品

            Clamping System M
            (1 Products)
            製品を表示
            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [GAAP] Axial Rake Angle Gage Insert
            2953473 MSDNN083 MSDNN083 WG 12.7000 .5000 12.7000 .5000 6.3500 .2500 114.3000 4.500 28.956 1.140 -7.000 SN..322
              定価:
              $75.17 /各
              価格::
              数量
              定価:
              割引: %
              価格::
              配置転換 この品目はありません
              交換品 この品目は、代理店経由で入手できる場合があります
              数量

              販売包装単位

              オリジナル製品

              クランピングシステムM
              (1 Products)
              製品を表示
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length Inclination Angle [GAAO] Orthogonal Rake Angle Gage Insert
              2023778 MWLNL3232P08 MWLNL3232P08 W 32.0000 1.260 32.0000 1.260 40.0000 1.575 170.0000 6.693 -5.000 -5.000 WN..0804..
                定価:
                $238.19 /各
                価格::
                数量
                定価:
                割引: %
                価格::
                配置転換 この品目はありません
                交換品 この品目は、代理店経由で入手できる場合があります
                数量

                販売包装単位

                オリジナル製品

                Clamping System M
                (2 Products)
                製品を表示
                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length Inclination Angle [GAAO] Orthogonal Rake Angle Gage Insert
                2951344 MWLNL124B MWLNL124B WG 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 28.4480 1.120 -5.000 -5.000 WN..432
                  定価:
                  $81.68 /各
                  価格::
                  数量
                  2951347 MWLNR124B MWLNR124B WG 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 28.4480 1.120 -5.000 -5.000 WN..432
                    定価:
                    $81.68 /各
                    価格::
                    数量
                    定価:
                    割引: %
                    価格::
                    配置転換 この品目はありません
                    交換品 この品目は、代理店経由で入手できる場合があります
                    数量

                    販売包装単位

                    オリジナル製品

                    Clamping System M
                    (5 Products)
                    製品を表示
                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length Inclination Angle [GAAO] Orthogonal Rake Angle Gage Insert
                    2951335 MTJNLS123 MTJNLS123 WG 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 28.448 1.120 -5.000 -5.000 TN..332
                      定価:
                      $81.68 /各
                      価格::
                      数量
                      2951337 MTJNLS164 MTJNLS164 WG 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 33.528 1.320 -5.000 -5.000 TN..432
                        定価:
                        $83.81 /各
                        価格::
                        数量
                        2951340 MTJNRS123 MTJNRS123 WG 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 28.448 1.120 -5.000 -5.000 TN..332
                          定価:
                          $81.68 /各
                          価格::
                          数量
                          2951341 MTJNRS163 MTJNRS163 WG 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 28.448 1.120 -5.000 -5.000 TN..332
                            定価:
                            $83.81 /各
                            価格::
                            数量
                            2951342 MTJNRS164 MTJNRS164 WG 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 33.528 1.320 -5.000 -5.000 TN..432
                              定価:
                              $83.81 /各
                              価格::
                              数量
                              定価:
                              割引: %
                              価格::
                              配置転換 この品目はありません
                              交換品 この品目は、代理店経由で入手できる場合があります
                              数量

                              販売包装単位

                              オリジナル製品

                              Clamping System M
                              (1 Products)
                              製品を表示
                              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [GAAP] Axial Rake Angle Gage Insert
                              2951327 MTENNS164 MTENNS164 WG 25.4000 1.000 25.4000 1.000 12.7000 .5000 152.4000 6.000 38.100 1.500 -10.000 TN..432
                                定価:
                                $83.81 /各
                                価格::
                                数量
                                定価:
                                割引: %
                                価格::
                                配置転換 この品目はありません
                                交換品 この品目は、代理店経由で入手できる場合があります
                                数量

                                販売包装単位

                                オリジナル製品

                                クランピングシステムM
                                (1 Products)
                                製品を表示
                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [GAAP] Axial Rake Angle Gage Insert
                                3852753 MTENNS3225P22 MTENNS3225P22 WG 32.0000 1.259 25.0000 .9840 12.2500 .4823 170.0000 6.692 35.000 1.378 -10.000 TN..220408
                                  定価:
                                  $103.47 /各
                                  価格::
                                  数量
                                  定価:
                                  割引: %
                                  価格::
                                  配置転換 この品目はありません
                                  交換品 この品目は、代理店経由で入手できる場合があります
                                  数量

                                  販売包装単位

                                  product-image
                                  Please adjust the following properties from

                                  ISO製品型番

                                  ANSI製品型番

                                  to find similar products.

                                  次のCAD図面が見つかりました

                                  お探しのファイルを一括して選択してダウンロードできます

                                  複製を作成しようとしています . 続行しますか?
                                  削除しようとしています 続行しますか?
                                  の名前を何に変更しますか?
                                  有効な名前を入力してください
                                  重複の名前を入力してください
                                  有効な名前を入力してください
                                  マイソリューションページにを追加しようとしています. 続行しますか?
                                  有効な名前を入力してください
                                  次のコピーを送信

                                  有効なメールアドレスを入力してください
                                  有効な名前を入力してください

                                  次のCAD図面が見つかりました

                                  お探しのファイルを一括して選択してダウンロードできます

                                  ダッシュボード情報を表示するには、ログインする必要があります
                                  Session expired due to inactivity, please login again
                                  カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
                                  アイテムがカートに正常に追加されました
                                  カートを表示
                                  DOWNLOAD TYPE:



                                  . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                  Minimum quantity should be

                                  SAP Material Number ISO製品型番 材種    
                                  Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                                  You are about to leave the Solution building process.

                                  Are you sure you want to leave?