P-スタイルクランプ • ネガスタイルインサート用
フィルタ
フィルタ
フィルタ表示
メートルインチ
Workpiece Material
Workpiece Material
- P Steel (106)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(106)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(106)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(106)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(106)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(106)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(106)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(106)
- M Stainless Steel (105)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(105)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(105)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(105)
- K Cast Iron (106)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(106)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(106)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(106)
- N Non-Ferrous Materials (100)
- N1Wrought Aluminum (100)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(100)
- N3High-Silicon Aluminum Alloys Si >12.2%(28)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (100)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (28)
- N6Carbon, Graphite Composites, CFRP (28)
- N7MMC's (28)
- S High-Temp Alloys (105)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(105)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(105)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(105)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(100)
- H Hardened Materials (69)
- H1Hardened Materials 44-48 HRC(69)
- H2Hardened Materials 48-55 HRC(69)
- H3Hardened Materials 56-60 HRC(69)
- H4Hardened Materials >60 HRC(69)
Select All Star
- IN (2)
Applications
Applications
Facing (90)
Multiple Direction Cutting (62)
Profiling (55)
Turning (106)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (106)
- Lightly Interrupted Cut (106)
- Smooth Cut (106)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (19)
- 63.0 (2)
- 75.0 (32)
- 90.0 (12)
- 93.0 (14)
- 95.0 (27)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (39)
- 2.0 (31)
- 3.0 (18)
- 4.0 (78)
- 6.0 (22)
- 8.0 (68)
to
Over All Length [L]
Over All Length [L]
- 3.937 in(6)
- 4.921 in(2)
- 4.9213 in(19)
- 5.9055 in(24)
- 5.906 in(8)
- 6.6929 in(23)
- 6.693 in(7)
- 7.874 in(2)
- 9.8425 in(7)
- 9.843 in(5)
- 11.811 in(3)
to
Over All Length [L]
Over All Length [L]
- 100.0 mm(6)
- 125.0 mm(21)
- 150.0 mm(32)
- 170.0 mm(30)
- 200.0 mm(2)
- 250.0 mm(12)
- 300.0 mm(3)
to
Corner Radius
Corner Radius
- 0.004 in(16)
- 0.008 in(27)
- 0.016 in(65)
- 0.024 in(6)
- 0.031 in(101)
- 0.047 in(100)
- 0.063 in(96)
- 0.094 in(22)
to
Corner Radius
Corner Radius
- 0.1 mm(16)
- 0.2 mm(27)
- 0.4 mm(65)
- 0.6 mm(6)
- 0.8 mm(101)
- 1.2 mm(100)
- 1.6 mm(96)
- 2.4 mm(22)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (63)
- CW5025 (53)
- PB100 (16)
- THM (53)
- THM-X (44)
- THMF-X (34)
- TN10P (69)
- TN10U (39)
- TN15M (43)
- TN15U (34)
- TN2000 (74)
- TN20K (74)
- TN20P (89)
- TN30M (51)
- TN30P (80)
- TN4000 (79)
- TN6010 (27)
- TTR (5)
- TTR-X (11)
- TTS (43)
- WBH10P (16)
- WBH10U (16)
- WBH20P (51)
- WBH30P (16)
- WBK40U (12)
- WDN00U (16)
- WDN25U (28)
- WK05CT (98)
- WK15CT (60)
- WK20CT (101)
- WM15CT (93)
- WM25CT (105)
- WM35CT (100)
- WP05CT (22)
- WP15CT (106)
- WP25CT (106)
- WP35CT (96)
- WS10PT (93)
- WS25PT (100)
- WU10HT (89)
- WU10PT (60)
- WU25PT (60)
Hand Of Tool
Hand Of Tool
- L (47)
- N (4)
- R (55)
Wiper Insert
Wiper Insert
- N (106)
- Y (32)
F Dimension
F Dimension
- 10.0 mm(1)
- 12.5 mm(3)
- 16.0 mm(1)
- 17.0 mm(3)
- 20.0 mm(7)
- 22.0 mm(6)
- 25.0 mm(17)
- 27.0 mm(4)
- 32.0 mm(34)
- 35.0 mm(4)
- 40.0 mm(16)
- 43.0 mm(1)
- 50.0 mm(9)
to
F Dimension
F Dimension
- 0.3937 in(1)
- 0.4921 in(3)
- 0.6299 in(1)
- 0.6693 in(3)
- 0.787 in(2)
- 0.7874 in(5)
- 0.8661 in(6)
- 0.984 in(2)
- 0.9843 in(15)
- 1.063 in(4)
- 1.2598 in(27)
- 1.26 in(7)
- 1.378 in(4)
- 1.5748 in(11)
- 1.575 in(5)
- 1.693 in(1)
- 1.9685 in(5)
- 1.969 in(3)
- 1.9895 in(1)
to
Cutting Direction
Cutting Direction
- B (27)
- E (16)
- S (63)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (87)
- NEGATIVE-ZERO (19)
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (34)
- D-DIAMOND/RHOMBIC 55 (16)
- S-SQUARE 90 (34)
- T-TRIANGLE 60 (12)
- W-TRIGON 80 (10)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (28)
- B L (51)
- C A (63)
- C N (69)
- D P (28)
- H W (106)
backEnd
Shank Height
Shank Height
- 0.6299 in(4)
- 0.63 in(2)
- 0.787 in(2)
- 0.7874 in(19)
- 0.984 in(4)
- 0.9843 in(28)
- 1.2598 in(23)
- 1.26 in(7)
- 1.5748 in(12)
- 1.575 in(4)
- 1.969 in(1)
to
Shank Height
Shank Height
- 16.0 mm(6)
- 20.0 mm(21)
- 25.0 mm(32)
- 32.0 mm(30)
- 40.0 mm(16)
- 50.0 mm(1)
to
Shank Width
Shank Width
- 0.6299 in(4)
- 0.63 in(2)
- 0.787 in(2)
- 0.7874 in(19)
- 0.984 in(7)
- 0.9843 in(36)
- 1.2598 in(16)
- 1.26 in(5)
- 1.5748 in(10)
- 1.575 in(4)
- 1.969 in(1)
to
Shank Width
Shank Width
- 16.0 mm(6)
- 20.0 mm(21)
- 25.0 mm(43)
- 32.0 mm(21)
- 40.0 mm(14)
- 50.0 mm(1)
to
No filters matching ""
