M690 시리즈

필터 선택
필터
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (53)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (50)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (53)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (53)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (53)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (53)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (53)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (53)
  • M Stainless Steel (53)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (53)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (53)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (53)
  • K Cast Iron (60)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (60)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (59)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (59)
  • N Non-Ferrous Materials (26)
    • N1
      Wrought Aluminum (26)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (26)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (26)
  • S High-Temp Alloys (50)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (41)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (41)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (41)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (50)
  • H Hardened Materials (24)
    • H1
      Hardened Materials 44-48 HRC (24)
    • H2
      Hardened Materials 48-55 HRC (22)
    • H3
      Hardened Materials 56-60 HRC (22)
Select All Star
  • DE (2)
  • IN (21)
  • US (12)
Applications
Applications
  • Face Milling Face Milling (22)
  • Shoulder Milling Shoulder Milling (22)
  • Shoulder Square End Shoulder Square End (22)
  • Slot Milling Slot Milling (22)
  • Slot Square End Slot Square End (22)
Cutting Diameter
Cutting Diameter
  • 1.5 in (1)
  • 1.969 in (3)
  • 2.0 in (1)
  • 2.48 in (3)
  • 2.5 in (1)
  • 3.0 in (2)
  • 3.15 in (3)
  • 3.938 in (3)
  • 4.0 in (1)
  • 4.921 in (3)
  • 6.299 in (1)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 38.1 mm (1)
  • 50.0 mm (3)
  • 50.801 mm (1)
  • 63.0 mm (3)
  • 63.5 mm (1)
  • 76.2 mm (2)
  • 80.0 mm (3)
  • 100.0 mm (3)
  • 101.601 mm (1)
  • 125.0 mm (3)
  • 160.0 mm (1)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Cutting Length
Cutting Length
  • 10.0 mm (11)
  • 10.15 mm (4)
  • 12.0 mm (5)
  • 12.701 mm (2)
Cutting Length Min 받는 사람 Cutting Length Max
Cutting Length
Cutting Length
  • 0.394 in (11)
  • 0.4 in (4)
  • 0.473 in (5)
  • 0.5 in (2)
Cutting Length Min 받는 사람 Cutting Length Max
Reach
Reach
  • 1.5 in (1)
  • 1.575 in (6)
  • 1.72 in (1)
  • 1.75 in (1)
  • 1.969 in (6)
  • 2.0 in (3)
  • 2.48 in (4)
Reach Min 받는 사람 Reach Max
Reach
Reach
  • 38.1 mm (1)
  • 40.0 mm (6)
  • 43.7 mm (1)
  • 44.45 mm (1)
  • 50.0 mm (6)
  • 50.801 mm (3)
  • 63.0 mm (4)
Reach Min 받는 사람 Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (22)
Tool Cutting Edge Angle Min 받는 사람 Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (11)
  • B-Cutter Retention Screw (9)
  • SHCS or RetScrw Or BoltCircle (1)
  • Weldon (1)
Number of Flutes
Number of Flutes
  • 10 (1)
  • 12 (2)
  • 3 (1)
  • 4 (2)
  • 5 (4)
  • 6 (6)
  • 8 (4)
  • 9 (2)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.5 in (1)
  • 1.575 in (6)
  • 1.75 in (1)
  • 1.969 in (6)
  • 2.0 in (3)
  • 2.48 in (4)
  • 4.0 in (1)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 38.1 mm (1)
  • 40.0 mm (6)
  • 44.45 mm (1)
  • 50.0 mm (6)
  • 50.801 mm (3)
  • 63.0 mm (4)
  • 101.601 mm (1)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.031 in (24)
  • 0.047 in (47)
  • 0.063 in (27)
  • 0.095 in (17)
  • 0.126 in (17)
Corner Radius Min 받는 사람 Corner Radius Max
Corner Radius
Corner Radius
  • 0.8 mm (24)
  • 1.201 mm (47)
  • 1.6 mm (27)
  • 2.401 mm (17)
  • 3.2 mm (17)
Corner Radius Min 받는 사람 Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (22)
  • THM-U (16)
  • TN2510 (22)
  • TN25M (15)
  • TN450 (22)
  • TN5515 (22)
  • TN6510 (15)
  • TN6520 (18)
  • TN6525 (18)
  • TN6540 (36)
  • TN7525 (22)
  • TN7535 (22)
  • TTI25 (22)
  • TTM (22)
  • TTM08 (22)
  • WK15CM (30)
  • WP35CM (31)
  • WS30PM (17)
  • WS40PM (18)
  • WU35PM (15)
Hand Of Tool
Hand Of Tool
  • R (22)
Rough Finish
Rough Finish
  • R (1)
Wiper Insert
Wiper Insert
  • N (43)
frontEnd
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • S-SQUARE 90 (43)
Insert IC Size
Insert IC Size
  • 12.701 mm (33)
  • 15.875 mm (10)
Insert IC Size Min 받는 사람 Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.5 in (33)
  • 0.625 in (10)
Insert IC Size Min 받는 사람 Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 12.701 mm (32)
  • 12.8 mm (1)
  • 15.875 mm (10)
Cutting Edge Length Min 받는 사람 Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.5 in (32)
  • 0.504 in (1)
  • 0.625 in (10)
Cutting Edge Length Min 받는 사람 Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • ALP (1)
  • MH (20)
  • ML (6)
  • MM (16)
Cutting Tool Material
Cutting Tool Material
  • H W (43)
Tolerance Class
Tolerance Class
  • E (1)
  • M (42)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (1)
  • SHELL MILL (21)
Back-End Diameter
Back-End Diameter
  • 19.05 mm (1)
  • 22.0 mm (6)
  • 25.401 mm (3)
  • 27.0 mm (3)
  • 31.75 mm (1)
  • 32.0 mm (3)
  • 38.1 mm (1)
  • 40.0 mm (4)
Back-End Diameter Min 받는 사람 Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.75 in (1)
  • 0.866 in (6)
  • 1.0 in (3)
  • 1.063 in (3)
  • 1.25 in (1)
  • 1.26 in (3)
  • 1.5 in (1)
  • 1.575 in (4)
Back-End Diameter Min 받는 사람 Back-End Diameter Max
No filters matching ""
내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
product-image
Please adjust the following properties from

ISO 카탈로그 번호

ANSI 카탈로그 번호

to find similar products.

The following files are available

Please select a file to download

Models

Product data

대시보드 정보를 보려면 로그인해야 합니다.
Session expired due to inactivity, please login again
장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
항목이 장바구니에 추가되었습니다.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO 카탈로그 번호 등급    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?