Laydown Threading - Boring Bars

필터 선택
필터
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (27)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (27)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (27)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (27)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (27)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (27)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (27)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (27)
  • M Stainless Steel (27)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (27)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (27)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (27)
  • K Cast Iron (27)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (27)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (27)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (27)
  • N Non-Ferrous Materials (27)
    • N1
      Wrought Aluminum (27)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (27)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (27)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (27)
    • N6
      Carbon, Graphite Composites, CFRP (27)
  • S High-Temp Alloys (27)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (27)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (27)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (27)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (27)
Select All Star
  • US (1)
Applications
Applications
  • ID Thread Turning ID Thread Turning (23)
  • OD Thread Turning OD Thread Turning (1)
  • TRN Boring TRN Boring (1)
Type of Thread
Type of Thread
  • 55 (25)
  • 60 (27)
  • BSW (22)
  • M (27)
  • NPT (9)
  • RD DIN 405 (19)
  • TR DIN 103 (19)
  • UN (22)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 3.938 in (2)
  • 6.0 in (2)
  • 7.0 in (4)
  • 7.087 in (7)
  • 7.875 in (3)
  • 9.843 in (6)
  • 10.0 in (3)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 100.0 mm (2)
  • 152.4 mm (2)
  • 177.8 mm (4)
  • 180.0 mm (7)
  • 200.0 mm (3)
  • 250.0 mm (6)
  • 254.0 mm (3)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (22)
  • 0.003 in (9)
  • 0.004 in (9)
  • 0.006 in (9)
  • 0.008 in (14)
  • 0.012 in (5)
  • 0.017 in (4)
  • 0.028 in (9)
  • 0.037 in (13)
  • 0.055 in (4)
Corner Radius Min 받는 사람 Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (22)
  • 0.076 mm (9)
  • 0.1 mm (9)
  • 0.151 mm (9)
  • 0.2 mm (14)
  • 0.301 mm (5)
  • 0.426 mm (4)
  • 0.701 mm (9)
  • 0.925 mm (13)
  • 1.401 mm (4)
Corner Radius Min 받는 사람 Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HCK20 (9)
  • HCM15 (7)
  • K15 (26)
  • P25 (18)
  • TN6025 (27)
Hand Of Tool
Hand Of Tool
  • L (6)
  • R (21)
F Dimension
F Dimension
  • 7.101 mm (3)
  • 7.301 mm (1)
  • 7.4 mm (1)
  • 8.625 mm (1)
  • 8.9 mm (2)
  • 11.5 mm (2)
  • 11.675 mm (2)
  • 12.951 mm (2)
  • 13.4 mm (2)
  • 15.601 mm (1)
  • 16.1 mm (2)
  • 16.3 mm (2)
  • 16.5 mm (1)
  • 17.2 mm (1)
  • 17.401 mm (1)
  • 19.6 mm (1)
  • 21.5 mm (1)
  • 22.401 mm (1)
F Dimension Min 받는 사람 F Dimension Max
F Dimension
F Dimension
  • 0.28 in (3)
  • 0.288 in (1)
  • 0.291 in (1)
  • 0.34 in (1)
  • 0.351 in (2)
  • 0.453 in (2)
  • 0.46 in (2)
  • 0.51 in (2)
  • 0.528 in (2)
  • 0.614 in (1)
  • 0.634 in (2)
  • 0.642 in (2)
  • 0.65 in (1)
  • 0.677 in (1)
  • 0.685 in (1)
  • 0.772 in (1)
  • 0.846 in (1)
  • 0.882 in (1)
F Dimension Min 받는 사람 F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 12.701 mm (3)
  • 13.0 mm (2)
  • 16.0 mm (2)
  • 16.5 mm (1)
  • 20.0 mm (2)
  • 20.326 mm (2)
  • 22.85 mm (2)
  • 24.0 mm (2)
  • 27.0 mm (1)
  • 29.0 mm (4)
  • 30.475 mm (1)
  • 32.0 mm (2)
  • 36.0 mm (1)
  • 39.0 mm (1)
  • 40.0 mm (1)
Minimum Axial Groove Diameter Min 받는 사람 Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.5 in (3)
  • 0.512 in (2)
  • 0.63 in (2)
  • 0.65 in (1)
  • 0.787 in (2)
  • 0.8 in (2)
  • 0.9 in (2)
  • 0.946 in (2)
  • 1.063 in (1)
  • 1.143 in (4)
  • 1.2 in (1)
  • 1.26 in (2)
  • 1.417 in (1)
  • 1.536 in (1)
  • 1.575 in (1)
Minimum Axial Groove Diameter Min 받는 사람 Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (4)
  • S (23)
Maximum Bore Depth
Maximum Bore Depth
  • 0.984 in (1)
  • 1.0 in (1)
  • 1.25 in (1)
  • 1.26 in (1)
  • 1.5 in (1)
  • 1.575 in (1)
  • 1.891 in (1)
  • 2.25 in (2)
  • 2.362 in (4)
  • 2.5 in (1)
  • 3.0 in (1)
  • 3.15 in (4)
  • 3.75 in (1)
  • 3.938 in (3)
  • 4.5 in (1)
  • 5.039 in (3)
Maximum Bore Depth Min 받는 사람 Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 25.0 mm (1)
  • 25.401 mm (1)
  • 31.75 mm (1)
  • 32.0 mm (1)
  • 38.1 mm (1)
  • 40.0 mm (1)
  • 48.0 mm (1)
  • 57.151 mm (2)
  • 60.0 mm (4)
  • 63.5 mm (1)
  • 76.2 mm (1)
  • 80.0 mm (4)
  • 95.25 mm (1)
  • 100.0 mm (3)
  • 114.301 mm (1)
  • 128.0 mm (3)
Maximum Bore Depth Min 받는 사람 Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (4)
  • S (23)
frontEnd
Clamp Style
Clamp Style
  • C (4)
  • M (4)
  • S (19)
Insert Shape
Insert Shape
  • LT-TRIANGLE LAY DOWN THREAD 60 (23)
  • ON EDGE MISC (4)
backEnd
Back-End Diameter
Back-End Diameter
  • 9.525 mm (2)
  • 12.0 mm (1)
  • 15.0 mm (1)
  • 15.875 mm (1)
  • 19.05 mm (5)
  • 20.0 mm (7)
  • 25.0 mm (3)
  • 31.75 mm (1)
  • 32.0 mm (6)
Back-End Diameter Min 받는 사람 Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.375 in (2)
  • 0.473 in (1)
  • 0.591 in (1)
  • 0.625 in (1)
  • 0.75 in (5)
  • 0.787 in (7)
  • 0.984 in (3)
  • 1.25 in (1)
  • 1.26 in (6)
Back-End Diameter Min 받는 사람 Back-End Diameter Max
Shank Height
Shank Height
  • 0.709 in (5)
  • 0.741 in (2)
  • 0.89 in (2)
  • 0.939 in (1)
  • 1.143 in (5)
  • 1.214 in (1)
Shank Height Min 받는 사람 Shank Height Max
Shank Height
Shank Height
  • 18.0 mm (5)
  • 18.825 mm (2)
  • 22.6 mm (2)
  • 23.826 mm (1)
  • 29.0 mm (5)
  • 30.826 mm (1)
Shank Height Min 받는 사람 Shank Height Max
Shank Width
Shank Width
  • 0.728 in (5)
  • 0.864 in (1)
  • 0.906 in (2)
  • 1.141 in (1)
  • 1.181 in (5)
Shank Width Min 받는 사람 Shank Width Max
Shank Width
Shank Width
  • 18.5 mm (5)
  • 21.951 mm (1)
  • 23.0 mm (2)
  • 28.951 mm (1)
  • 30.0 mm (5)
Shank Width Min 받는 사람 Shank Width Max
No filters matching ""
내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
product-image
Please adjust the following properties from

ISO 카탈로그 번호

ANSI 카탈로그 번호

to find similar products.

The following files are available

Please select a file to download

Models

대시보드 정보를 보려면 로그인해야 합니다.
Session expired due to inactivity, please login again
장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
항목이 장바구니에 추가되었습니다.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO 카탈로그 번호 등급    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?