Top Drill S™ • 강 및 주철

필터 선택
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (202)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(202)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(202)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(202)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(202)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(202)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(202)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(202)
    • M Stainless Steel (202)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(202)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(202)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(202)
    • K Cast Iron (114)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(114)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(114)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(114)
    Select All Star
    • IN (13)
    • SG (95)
    Applications
    Applications
    • CornerStyle Chamfer DrillingCornerStyle Chamfer Drilling (193)
    • Cross Hole DrillingCross Hole Drilling (34)
    • DrillingDrilling (466)
    • Inclined Exit DrillingInclined Exit Drilling (34)
    • Stacked Plates DrillingStacked Plates Drilling (99)
    Cutting Diameter
    Cutting Diameter
    • 0.119 in(3)
    • 0.12 in(4)
    • 0.125 in(4)
    • 0.126 in(1)
    • 0.129 in(4)
    • 0.13 in(1)
    • 0.136 in(3)
    • 0.138 in(2)
    • 0.142 in(1)
    • 0.143 in(1)
    • 0.145 in(5)
    • 0.147 in(4)
    • 0.15 in(1)
    • 0.156 in(1)
    • 0.157 in(4)
    • 0.159 in(3)
    • 0.161 in(7)
    • 0.165 in(2)
    • 0.166 in(3)
    • 0.169 in(2)
    • 0.177 in(2)
    • 0.182 in(3)
    • 0.188 in(3)
    • 0.191 in(5)
    • 0.193 in(1)
    • 0.197 in(2)
    • 0.201 in(5)
    • 0.203 in(2)
    • 0.213 in(5)
    • 0.217 in(2)
    • 0.219 in(4)
    • 0.221 in(5)
    • 0.228 in(3)
    • 0.234 in(1)
    • 0.237 in(3)
    • 0.244 in(1)
    • 0.248 in(1)
    • 0.25 in(3)
    • 0.256 in(3)
    • 0.257 in(4)
    • 0.261 in(2)
    • 0.266 in(4)
    • 0.268 in(4)
    • 0.272 in(1)
    • 0.276 in(2)
    • 0.281 in(1)
    • 0.288 in(1)
    • 0.291 in(1)
    • 0.297 in(1)
    • 0.307 in(2)
    • 0.313 in(3)
    • 0.315 in(4)
    • 0.323 in(1)
    • 0.328 in(1)
    • 0.332 in(2)
    • 0.335 in(5)
    • 0.345 in(3)
    • 0.347 in(1)
    • 0.354 in(3)
    • 0.359 in(1)
    • 0.362 in(1)
    • 0.366 in(2)
    • 0.368 in(5)
    • 0.374 in(2)
    • 0.375 in(3)
    • 0.378 in(1)
    • 0.382 in(1)
    • 0.386 in(1)
    • 0.391 in(1)
    • 0.394 in(2)
    • 0.402 in(2)
    • 0.406 in(2)
    • 0.408 in(2)
    • 0.41 in(1)
    • 0.414 in(3)
    • 0.421 in(1)
    • 0.422 in(3)
    • 0.425 in(1)
    • 0.433 in(4)
    • 0.437 in(1)
    • 0.438 in(2)
    • 0.441 in(1)
    • 0.445 in(2)
    • 0.453 in(2)
    • 0.457 in(1)
    • 0.465 in(2)
    • 0.47 in(3)
    • 0.473 in(5)
    • 0.48 in(1)
    • 0.484 in(4)
    • 0.488 in(1)
    • 0.492 in(3)
    • 0.496 in(3)
    • 0.5 in(2)
    • 0.512 in(5)
    • 0.516 in(3)
    • 0.528 in(1)
    • 0.531 in(4)
    • 0.535 in(2)
    • 0.543 in(1)
    • 0.547 in(3)
    • 0.551 in(2)
    • 0.555 in(2)
    • 0.559 in(1)
    • 0.564 in(2)
    • 0.568 in(3)
    • 0.572 in(2)
    • 0.576 in(3)
    • 0.578 in(4)
    • 0.579 in(1)
    • 0.583 in(3)
    • 0.587 in(4)
    • 0.591 in(1)
    • 0.594 in(4)
    • 0.595 in(4)
    • 0.598 in(3)
    • 0.602 in(2)
    • 0.606 in(4)
    • 0.609 in(5)
    • 0.61 in(2)
    • 0.614 in(2)
    • 0.618 in(5)
    • 0.622 in(4)
    • 0.625 in(3)
    • 0.626 in(3)
    • 0.63 in(2)
    • 0.634 in(2)
    • 0.638 in(6)
    • 0.641 in(3)
    • 0.642 in(4)
    • 0.646 in(5)
    • 0.654 in(5)
    • 0.656 in(4)
    • 0.657 in(3)
    • 0.661 in(3)
    • 0.665 in(6)
    • 0.673 in(5)
    • 0.677 in(6)
    • 0.681 in(5)
    • 0.685 in(6)
    • 0.689 in(3)
    • 0.69 in(1)
    • 0.694 in(4)
    • 0.698 in(5)
    • 0.702 in(2)
    • 0.704 in(5)
    • 0.705 in(4)
    • 0.709 in(1)
    • 0.713 in(4)
    • 0.717 in(5)
    • 0.719 in(5)
    • 0.72 in(6)
    • 0.728 in(4)
    • 0.734 in(6)
    • 0.74 in(5)
    • 0.75 in(2)
    • 0.756 in(5)
    • 0.76 in(5)
    • 0.768 in(6)
    • 0.78 in(5)
    • 0.787 in(2)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 3.0 mm(3)
    • 3.051 mm(4)
    • 3.176 mm(4)
    • 3.2 mm(1)
    • 3.276 mm(4)
    • 3.301 mm(1)
    • 3.45 mm(3)
    • 3.5 mm(2)
    • 3.575 mm(1)
    • 3.6 mm(1)
    • 3.651 mm(5)
    • 3.725 mm(4)
    • 3.801 mm(1)
    • 3.975 mm(1)
    • 4.0 mm(4)
    • 4.05 mm(3)
    • 4.101 mm(7)
    • 4.2 mm(2)
    • 4.226 mm(3)
    • 4.3 mm(2)
    • 4.5 mm(2)
    • 4.625 mm(3)
    • 4.775 mm(3)
    • 4.851 mm(5)
    • 4.9 mm(1)
    • 5.0 mm(2)
    • 5.101 mm(5)
    • 5.15 mm(2)
    • 5.4 mm(5)
    • 5.5 mm(2)
    • 5.551 mm(4)
    • 5.601 mm(1)
    • 5.625 mm(4)
    • 5.801 mm(3)
    • 5.95 mm(1)
    • 6.0 mm(3)
    • 6.2 mm(1)
    • 6.301 mm(1)
    • 6.351 mm(3)
    • 6.5 mm(3)
    • 6.525 mm(4)
    • 6.625 mm(2)
    • 6.75 mm(4)
    • 6.801 mm(4)
    • 6.9 mm(1)
    • 7.0 mm(2)
    • 7.15 mm(1)
    • 7.301 mm(1)
    • 7.4 mm(1)
    • 7.551 mm(1)
    • 7.801 mm(2)
    • 7.95 mm(3)
    • 8.0 mm(4)
    • 8.201 mm(1)
    • 8.326 mm(1)
    • 8.425 mm(2)
    • 8.5 mm(5)
    • 8.725 mm(3)
    • 8.8 mm(1)
    • 9.0 mm(3)
    • 9.125 mm(1)
    • 9.201 mm(1)
    • 9.3 mm(2)
    • 9.35 mm(5)
    • 9.5 mm(2)
    • 9.525 mm(3)
    • 9.601 mm(1)
    • 9.701 mm(1)
    • 9.8 mm(1)
    • 9.925 mm(1)
    • 10.0 mm(2)
    • 10.201 mm(2)
    • 10.3 mm(2)
    • 10.326 mm(2)
    • 10.4 mm(1)
    • 10.5 mm(3)
    • 10.701 mm(1)
    • 10.726 mm(3)
    • 10.8 mm(1)
    • 11.0 mm(4)
    • 11.101 mm(1)
    • 11.125 mm(2)
    • 11.201 mm(1)
    • 11.3 mm(2)
    • 11.5 mm(2)
    • 11.601 mm(1)
    • 11.8 mm(2)
    • 11.9 mm(3)
    • 12.0 mm(5)
    • 12.201 mm(1)
    • 12.3 mm(4)
    • 12.4 mm(1)
    • 12.5 mm(3)
    • 12.601 mm(3)
    • 12.701 mm(2)
    • 13.0 mm(5)
    • 13.101 mm(3)
    • 13.4 mm(1)
    • 13.5 mm(4)
    • 13.601 mm(2)
    • 13.8 mm(1)
    • 13.9 mm(3)
    • 14.0 mm(2)
    • 14.101 mm(2)
    • 14.201 mm(1)
    • 14.3 mm(2)
    • 14.4 mm(3)
    • 14.5 mm(2)
    • 14.601 mm(3)
    • 14.675 mm(4)
    • 14.701 mm(1)
    • 14.8 mm(3)
    • 14.9 mm(4)
    • 15.0 mm(1)
    • 15.076 mm(4)
    • 15.101 mm(4)
    • 15.201 mm(3)
    • 15.3 mm(2)
    • 15.4 mm(4)
    • 15.476 mm(5)
    • 15.5 mm(2)
    • 15.601 mm(2)
    • 15.701 mm(5)
    • 15.8 mm(4)
    • 15.875 mm(3)
    • 15.9 mm(3)
    • 16.0 mm(2)
    • 16.1 mm(2)
    • 16.2 mm(6)
    • 16.276 mm(3)
    • 16.3 mm(4)
    • 16.401 mm(5)
    • 16.6 mm(5)
    • 16.675 mm(4)
    • 16.7 mm(3)
    • 16.8 mm(3)
    • 16.901 mm(6)
    • 17.1 mm(5)
    • 17.2 mm(6)
    • 17.3 mm(5)
    • 17.401 mm(6)
    • 17.475 mm(3)
    • 17.5 mm(1)
    • 17.6 mm(4)
    • 17.7 mm(5)
    • 17.8 mm(2)
    • 17.85 mm(5)
    • 17.901 mm(4)
    • 18.0 mm(1)
    • 18.1 mm(4)
    • 18.2 mm(5)
    • 18.25 mm(5)
    • 18.3 mm(6)
    • 18.5 mm(4)
    • 18.651 mm(6)
    • 18.8 mm(5)
    • 19.05 mm(2)
    • 19.201 mm(5)
    • 19.3 mm(5)
    • 19.5 mm(6)
    • 19.8 mm(5)
    • 20.0 mm(2)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 14.0 mm(9)
    • 17.0 mm(7)
    • 20.0 mm(15)
    • 23.0 mm(12)
    • 24.0 mm(9)
    • 29.0 mm(18)
    • 33.0 mm(12)
    • 35.0 mm(30)
    • 40.0 mm(15)
    • 41.0 mm(9)
    • 43.0 mm(28)
    • 45.0 mm(26)
    • 48.0 mm(11)
    • 49.0 mm(13)
    • 51.0 mm(29)
    • 55.0 mm(21)
    • 56.0 mm(18)
    • 57.0 mm(5)
    • 60.0 mm(11)
    • 63.0 mm(16)
    • 64.0 mm(3)
    • 71.0 mm(28)
    • 77.0 mm(18)
    • 80.0 mm(8)
    • 96.0 mm(5)
    • 101.0 mm(1)
    • 112.0 mm(11)
    • 113.0 mm(31)
    • 124.0 mm(21)
    • 128.0 mm(26)
    Maximum Hole Depth [L4] Min받는 사람Maximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 0.551 in(9)
    • 0.669 in(7)
    • 0.787 in(15)
    • 0.906 in(12)
    • 0.946 in(9)
    • 1.143 in(18)
    • 1.299 in(12)
    • 1.379 in(30)
    • 1.575 in(15)
    • 1.614 in(9)
    • 1.693 in(28)
    • 1.772 in(26)
    • 1.891 in(11)
    • 1.929 in(13)
    • 2.008 in(29)
    • 2.165 in(21)
    • 2.205 in(18)
    • 2.244 in(5)
    • 2.362 in(11)
    • 2.48 in(16)
    • 2.52 in(3)
    • 2.795 in(28)
    • 3.031 in(18)
    • 3.15 in(8)
    • 3.781 in(5)
    • 3.976 in(1)
    • 4.409 in(11)
    • 4.449 in(31)
    • 4.882 in(21)
    • 5.039 in(26)
    Maximum Hole Depth [L4] Min받는 사람Maximum Hole Depth [L4] Max
    Reach
    Reach
    • 0.787 in(9)
    • 0.946 in(7)
    • 1.102 in(27)
    • 1.339 in(9)
    • 1.417 in(12)
    • 1.575 in(12)
    • 1.614 in(6)
    • 1.732 in(15)
    • 1.85 in(15)
    • 1.929 in(9)
    • 2.087 in(15)
    • 2.165 in(15)
    • 2.205 in(11)
    • 2.362 in(13)
    • 2.402 in(13)
    • 2.559 in(26)
    • 2.638 in(5)
    • 2.795 in(18)
    • 2.874 in(29)
    • 2.914 in(3)
    • 3.031 in(11)
    • 3.11 in(21)
    • 3.269 in(16)
    • 3.622 in(8)
    • 3.661 in(28)
    • 3.976 in(18)
    • 4.331 in(5)
    • 4.764 in(1)
    • 5.039 in(11)
    • 5.315 in(31)
    • 5.748 in(26)
    • 5.827 in(21)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 20.0 mm(9)
    • 24.0 mm(7)
    • 28.0 mm(27)
    • 34.0 mm(9)
    • 36.0 mm(12)
    • 40.0 mm(12)
    • 41.0 mm(6)
    • 44.0 mm(15)
    • 47.0 mm(15)
    • 49.0 mm(9)
    • 53.0 mm(15)
    • 55.0 mm(15)
    • 56.0 mm(11)
    • 60.0 mm(13)
    • 61.0 mm(13)
    • 65.0 mm(26)
    • 67.0 mm(5)
    • 71.0 mm(18)
    • 73.0 mm(29)
    • 74.0 mm(3)
    • 77.0 mm(11)
    • 79.0 mm(21)
    • 83.0 mm(16)
    • 92.0 mm(8)
    • 93.0 mm(28)
    • 101.0 mm(18)
    • 110.0 mm(5)
    • 121.0 mm(1)
    • 128.0 mm(11)
    • 135.0 mm(31)
    • 146.0 mm(26)
    • 148.0 mm(21)
    Reach Min받는 사람Reach Max
    Over All Length [L]
    Over All Length [L]
    • 2.441 in(9)
    • 2.598 in(34)
    • 2.914 in(12)
    • 3.071 in(12)
    • 3.11 in(15)
    • 3.228 in(15)
    • 3.426 in(9)
    • 3.504 in(15)
    • 3.583 in(15)
    • 3.701 in(11)
    • 4.016 in(15)
    • 4.055 in(13)
    • 4.134 in(5)
    • 4.213 in(13)
    • 4.449 in(3)
    • 4.529 in(26)
    • 4.646 in(18)
    • 4.843 in(29)
    • 4.882 in(11)
    • 5.157 in(21)
    • 5.236 in(16)
    • 5.315 in(8)
    • 5.63 in(28)
    • 6.024 in(18)
    • 6.22 in(5)
    • 6.732 in(1)
    • 6.929 in(11)
    • 7.283 in(31)
    • 7.756 in(26)
    • 7.875 in(21)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 62.0 mm(9)
    • 66.0 mm(34)
    • 74.0 mm(12)
    • 78.0 mm(12)
    • 79.0 mm(15)
    • 82.0 mm(15)
    • 87.0 mm(9)
    • 89.0 mm(15)
    • 91.0 mm(15)
    • 94.0 mm(11)
    • 102.0 mm(15)
    • 103.0 mm(13)
    • 105.0 mm(5)
    • 107.0 mm(13)
    • 113.0 mm(3)
    • 115.0 mm(26)
    • 118.0 mm(18)
    • 123.0 mm(29)
    • 124.0 mm(11)
    • 131.0 mm(21)
    • 133.0 mm(16)
    • 135.0 mm(8)
    • 143.0 mm(28)
    • 153.0 mm(18)
    • 158.0 mm(5)
    • 171.0 mm(1)
    • 176.0 mm(11)
    • 185.0 mm(31)
    • 197.0 mm(26)
    • 200.0 mm(21)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    application
    Coating
    Coating
    • AlCrN (193)
    • TiAlN (273)
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WK15PD (193)
    • WP20PD (273)
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 6.0 mm(102)
    • 8.0 mm(38)
    • 10.0 mm(36)
    • 12.0 mm(38)
    • 14.0 mm(35)
    • 16.0 mm(69)
    • 18.0 mm(88)
    • 20.0 mm(60)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.237 in(102)
    • 0.315 in(38)
    • 0.394 in(36)
    • 0.473 in(38)
    • 0.551 in(35)
    • 0.63 in(69)
    • 0.709 in(88)
    • 0.787 in(60)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO 카탈로그 번호등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?