환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

WIDIA 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
품목 are being added to the cart
장바구니 보기
너무 늦기 전에 독점적인 혜택을 누리세요! 特別オファー

새로운 - MM 형상 PSTS 인서트

대부분의 황삭 및 반정삭 밀링 애플리케이션을 위한 범용 다목적 솔루션.

  • T-랜드가 전체적으로 적용된 강력한 절삭날
  • WU20PM, WK15CM, WP35CM 재종으로 제공
  • 에지당 비용 절감 효과 제공

M1200

테이퍼 50 스핀들 밀링 기계 및 구동 공구의 생산성을 향상시키는 동급 최고의 페이스 밀링 플랫폼.

  • 에지당 비용이 낮고 생산성이 높은 솔루션.
  • 모든 페이스 밀링 요구를 충족하는 하나의 시리즈.
  • 75°, 45°, 31° 리드각.
  • 공구 수명이 긴 경가공~중가공.

M1200 Mini

테이퍼 40 스핀들 밀링 기계 및 구동 공구의 생산성을 향상시키는 동급 최고의 페이스 밀링 플랫폼.

  • 낮은 절삭 깊이 페이스 밀링을 위한 첫 번째 선택.
  • 저렴한 에지당 비용 및 높은 생산성.
  • 부드러운 절삭 동작으로 인한 재절삭력.
  • 크게 향상된 MRR(금속 제거율).

M1200 맥스

M1200 맥스 스크루 클램핑은 12-에지 페이스 밀로, 에지당 비용이 가장 우수한 공구로 최대 7.5mm의 높은 DOC에서 가공 작업을 수행해야 하는 고객에게 적합합니다.

  • 강철, 스테인리스강, 회주철 및 결절성 철용 밀
  • WP35CM, WU20PM, WK15CM 재종의 범용 HNMU11 -MM 형상.
  • 포괄적 제품: 56° 리드각의 커터와 7mm의 강력하고 두꺼운 인서트.
  • 11mm IC의 PSTS(Pressed-and-Sintered-To-Size) 인서트.
  • 높은 DOC 성능(최대 7.5mm Ap1).

 

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (233)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(217)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(233)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(233)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(233)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(233)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(233)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(233)
    • M Stainless Steel (233)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(233)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(233)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(233)
    • K Cast Iron (234)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(234)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(231)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(231)
    • N Non-Ferrous Materials (169)
      • N1
        Wrought Aluminum (169)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(169)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(169)
    • S High-Temp Alloys (226)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(204)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(204)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(204)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(226)
    • H Hardened Materials (165)
      • H1
        Hardened Materials 44-48 HRC(165)
    Select All Star
    • CN (68)
    • DE (127)
    • GB (29)
    • IN (35)
    • SG (74)
    • US (79)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (91)
    • Face MillingFace Milling (158)
    Cutting Diameter
    Cutting Diameter
    • 0.984 in(7)
    • 1.0 in(4)
    • 1.25 in(1)
    • 1.26 in(8)
    • 1.5 in(4)
    • 1.5748 in(3)
    • 1.575 in(4)
    • 1.968 in(1)
    • 1.9685 in(5)
    • 1.969 in(2)
    • 2.0 in(8)
    • 2.48 in(5)
    • 2.4803 in(6)
    • 2.5 in(8)
    • 3.0 in(13)
    • 3.1496 in(7)
    • 3.15 in(7)
    • 3.937 in(13)
    • 4.0 in(12)
    • 4.92 in(1)
    • 4.921 in(7)
    • 4.9213 in(4)
    • 5.0 in(6)
    • 6.0 in(5)
    • 6.299 in(1)
    • 6.2992 in(4)
    • 7.874 in(3)
    • 8.0 in(2)
    • 9.8425 in(2)
    • 9.843 in(1)
    • 10.0 in(2)
    • 12.0 in(1)
    • 12.402 in(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 25.0 mm(7)
    • 25.4 mm(4)
    • 31.75 mm(1)
    • 32.0 mm(8)
    • 38.1 mm(4)
    • 40.0 mm(7)
    • 50.0 mm(8)
    • 50.8 mm(8)
    • 63.0 mm(11)
    • 63.5 mm(8)
    • 76.2 mm(13)
    • 80.0 mm(14)
    • 100.0 mm(13)
    • 101.6 mm(12)
    • 125.0 mm(12)
    • 127.0 mm(6)
    • 152.4 mm(5)
    • 160.0 mm(5)
    • 200.0 mm(3)
    • 203.197 mm(1)
    • 203.2 mm(1)
    • 250.0 mm(3)
    • 254.0 mm(2)
    • 304.8 mm(1)
    • 315.0 mm(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 33.72 mm(6)
    • 34.12 mm(3)
    • 39.13 mm(1)
    • 39.53 mm(1)
    • 40.47 mm(1)
    • 40.72 mm(6)
    • 46.14 mm(2)
    • 46.79 mm(1)
    • 46.816 mm(2)
    • 46.817 mm(1)
    • 48.716 mm(2)
    • 50.96 mm(2)
    • 51.0 mm(1)
    • 52.24 mm(1)
    • 54.14 mm(1)
    • 56.76 mm(1)
    • 57.56 mm(1)
    • 58.71 mm(3)
    • 59.51 mm(3)
    • 61.0 mm(2)
    • 61.8 mm(2)
    • 64.14 mm(1)
    • 64.94 mm(1)
    • 67.89 mm(1)
    • 68.69 mm(1)
    • 69.75 mm(1)
    • 71.54 mm(1)
    • 71.706 mm(3)
    • 72.04 mm(1)
    • 72.205 mm(3)
    • 74.0 mm(3)
    • 74.5 mm(2)
    • 74.799 mm(1)
    • 77.13 mm(1)
    • 77.63 mm(1)
    • 80.874 mm(1)
    • 81.374 mm(1)
    • 82.95 mm(1)
    • 84.73 mm(2)
    • 84.9 mm(3)
    • 86.75 mm(2)
    • 87.2 mm(3)
    • 88.0 mm(2)
    • 88.52 mm(2)
    • 88.7 mm(3)
    • 90.32 mm(1)
    • 91.0 mm(3)
    • 91.8 mm(2)
    • 94.082 mm(1)
    • 94.12 mm(1)
    • 97.88 mm(1)
    • 106.74 mm(2)
    • 108.36 mm(1)
    • 108.51 mm(2)
    • 108.696 mm(3)
    • 110.296 mm(3)
    • 110.98 mm(3)
    • 111.799 mm(1)
    • 111.8 mm(1)
    • 112.58 mm(5)
    • 113.4 mm(2)
    • 117.856 mm(1)
    • 119.456 mm(1)
    • 131.74 mm(2)
    • 133.5 mm(1)
    • 133.712 mm(3)
    • 133.735 mm(1)
    • 135.706 mm(1)
    • 135.94 mm(2)
    • 135.98 mm(1)
    • 136.747 mm(1)
    • 136.799 mm(1)
    • 137.95 mm(3)
    • 142.878 mm(1)
    • 144.882 mm(1)
    • 163.33 mm(1)
    • 163.37 mm(2)
    • 164.147 mm(1)
    • 164.2 mm(1)
    • 168.5 mm(1)
    • 170.97 mm(2)
    • 171.747 mm(1)
    • 171.8 mm(1)
    • 210.988 mm(1)
    • 211.747 mm(1)
    • 211.8 mm(1)
    • 214.179 mm(1)
    • 214.195 mm(1)
    • 260.992 mm(1)
    • 261.747 mm(1)
    • 261.8 mm(1)
    • 264.662 mm(1)
    • 264.992 mm(1)
    • 315.791 mm(1)
    • 325.995 mm(1)
    Maximum Cutting Diameter Min받는 사람Maximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.787 in(1)
    • 0.866 in(1)
    • 0.984 in(3)
    • 1.328 in(6)
    • 1.343 in(3)
    • 1.54 in(1)
    • 1.556 in(1)
    • 1.593 in(1)
    • 1.603 in(6)
    • 1.813 in(2)
    • 1.817 in(2)
    • 1.842 in(1)
    • 1.843 in(1)
    • 1.918 in(2)
    • 2.006 in(2)
    • 2.008 in(1)
    • 2.057 in(1)
    • 2.131 in(1)
    • 2.235 in(1)
    • 2.266 in(1)
    • 2.3114 in(3)
    • 2.343 in(3)
    • 2.401 in(2)
    • 2.434 in(2)
    • 2.525 in(1)
    • 2.557 in(1)
    • 2.673 in(1)
    • 2.704 in(1)
    • 2.746 in(1)
    • 2.816 in(1)
    • 2.8231 in(3)
    • 2.836 in(1)
    • 2.843 in(3)
    • 2.913 in(3)
    • 2.933 in(2)
    • 2.9448 in(1)
    • 3.037 in(1)
    • 3.056 in(1)
    • 3.184 in(1)
    • 3.204 in(1)
    • 3.266 in(1)
    • 3.336 in(2)
    • 3.343 in(3)
    • 3.415 in(2)
    • 3.433 in(3)
    • 3.4646 in(2)
    • 3.485 in(2)
    • 3.4921 in(1)
    • 3.556 in(1)
    • 3.582 in(2)
    • 3.583 in(1)
    • 3.6142 in(2)
    • 3.704 in(1)
    • 3.706 in(1)
    • 3.853 in(1)
    • 4.202 in(2)
    • 4.266 in(1)
    • 4.272 in(2)
    • 4.342 in(3)
    • 4.369 in(1)
    • 4.3694 in(2)
    • 4.4015 in(1)
    • 4.4016 in(1)
    • 4.432 in(1)
    • 4.4324 in(4)
    • 4.4646 in(2)
    • 4.64 in(1)
    • 4.703 in(1)
    • 5.186 in(2)
    • 5.256 in(1)
    • 5.264 in(3)
    • 5.265 in(1)
    • 5.343 in(1)
    • 5.3518 in(1)
    • 5.352 in(1)
    • 5.3534 in(1)
    • 5.3837 in(1)
    • 5.3858 in(1)
    • 5.431 in(1)
    • 5.4312 in(2)
    • 5.625 in(1)
    • 5.704 in(1)
    • 6.4302 in(1)
    • 6.4318 in(2)
    • 6.4625 in(1)
    • 6.4646 in(1)
    • 6.634 in(1)
    • 6.731 in(2)
    • 6.7617 in(1)
    • 6.7638 in(1)
    • 8.307 in(1)
    • 8.3365 in(1)
    • 8.3386 in(1)
    • 8.432 in(1)
    • 8.433 in(1)
    • 10.275 in(1)
    • 10.305 in(1)
    • 10.3071 in(1)
    • 10.433 in(2)
    • 12.433 in(1)
    • 12.834 in(1)
    Maximum Cutting Diameter Min받는 사람Maximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 1.7 mm(12)
    • 2.2 mm(10)
    • 3.5 mm(49)
    • 4.4 mm(2)
    • 4.44 mm(1)
    • 4.5 mm(41)
    • 4.6 mm(1)
    • 4.7 mm(13)
    • 6.0 mm(10)
    • 7.5 mm(19)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.068 in(12)
    • 0.086 in(1)
    • 0.087 in(9)
    • 0.136 in(2)
    • 0.138 in(47)
    • 0.172 in(2)
    • 0.175 in(1)
    • 0.176 in(2)
    • 0.177 in(38)
    • 0.178 in(1)
    • 0.18 in(1)
    • 0.185 in(8)
    • 0.186 in(5)
    • 0.236 in(10)
    • 0.2953 in(19)
    Cutting Length Min받는 사람Cutting Length Max
    Reach
    Reach
    • 1.25 in(4)
    • 1.26 in(7)
    • 1.5 in(2)
    • 1.57 in(4)
    • 1.5748 in(7)
    • 1.575 in(41)
    • 1.75 in(23)
    • 1.968 in(1)
    • 1.9681 in(1)
    • 1.9685 in(9)
    • 1.969 in(17)
    • 2.0 in(2)
    • 2.38 in(15)
    • 2.48 in(10)
    • 2.4803 in(13)
    • 3.15 in(2)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 31.75 mm(4)
    • 32.0 mm(7)
    • 38.1 mm(2)
    • 39.878 mm(4)
    • 40.0 mm(48)
    • 44.44 mm(1)
    • 44.45 mm(22)
    • 49.991 mm(1)
    • 50.0 mm(27)
    • 50.8 mm(2)
    • 60.45 mm(5)
    • 60.452 mm(10)
    • 63.0 mm(23)
    • 80.0 mm(1)
    • 80.01 mm(1)
    Reach Min받는 사람Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 15.0 (22)
    • 45.0 (94)
    • 56.0 (19)
    • 58.0 (23)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (88)
    • B-Cutter Retention Screw (28)
    • C-Bolt Circle (14)
    • KL Screw (3)
    • SHCS or RetScrw Or BoltCircle (3)
    • Screw-On Connection (6)
    • Straight-Cylindrical (9)
    • Weldon (7)
    Number of Flutes
    Number of Flutes
    • 10 (9)
    • 11 (2)
    • 12 (8)
    • 14 (5)
    • 16 (5)
    • 18 (2)
    • 2 (4)
    • 20 (2)
    • 22 (1)
    • 24 (1)
    • 28 (1)
    • 3 (12)
    • 4 (19)
    • 5 (25)
    • 6 (24)
    • 7 (4)
    • 8 (24)
    • 9 (10)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 3.0 (57)
    • 6.0 (53)
    • 12.0 (255)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.57 in(4)
    • 1.5748 in(7)
    • 1.575 in(33)
    • 1.75 in(23)
    • 1.968 in(1)
    • 1.9681 in(1)
    • 1.9685 in(9)
    • 1.969 in(16)
    • 2.0 in(2)
    • 2.157 in(1)
    • 2.165 in(1)
    • 2.224 in(1)
    • 2.38 in(15)
    • 2.406 in(1)
    • 2.48 in(12)
    • 2.4803 in(13)
    • 3.15 in(2)
    • 3.228 in(1)
    • 3.28 in(2)
    • 3.783 in(1)
    • 3.819 in(2)
    • 4.213 in(1)
    • 4.724 in(2)
    • 4.8 in(1)
    • 5.118 in(4)
    • 7.874 in(2)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 39.878 mm(4)
    • 40.0 mm(40)
    • 44.44 mm(1)
    • 44.45 mm(22)
    • 49.991 mm(1)
    • 50.0 mm(26)
    • 50.8 mm(2)
    • 54.8 mm(1)
    • 55.0 mm(1)
    • 56.5 mm(1)
    • 60.45 mm(5)
    • 60.452 mm(10)
    • 61.1 mm(1)
    • 63.0 mm(25)
    • 80.0 mm(1)
    • 80.01 mm(1)
    • 82.0 mm(1)
    • 83.3 mm(2)
    • 96.1 mm(1)
    • 97.0 mm(2)
    • 107.0 mm(1)
    • 120.0 mm(2)
    • 121.92 mm(1)
    • 130.0 mm(4)
    • 200.0 mm(2)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.039 in(24)
    • 0.047 in(216)
    • 0.051 in(57)
    • 0.063 in(53)
    • 0.126 in(79)
    • 0.171 in(75)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 1.0 mm(24)
    • 1.2 mm(216)
    • 1.3 mm(57)
    • 1.6 mm(53)
    • 3.2 mm(79)
    • 4.35 mm(75)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(259)
    • 1.2 mm(12)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(259)
    • 0.0461 in(12)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM-U (122)
    • TN6501 (121)
    • TN6510 (122)
    • TN6520 (152)
    • TN6525 (146)
    • TN6540 (152)
    • WK15CM (169)
    • WK20PM (68)
    • WK25YM (46)
    • WP25PM (150)
    • WP35CM (171)
    • WP40PM (151)
    • WS30PM (143)
    • WS40PM (153)
    • WU20PM (61)
    Hand Of Tool
    Hand Of Tool
    • R (158)
    Wiper Insert
    Wiper Insert
    • N (88)
    • Y (25)
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.7598 in(4)
    • 0.9567 in(2)
    • 0.957 in(2)
    • 1.006 in(3)
    • 1.0591 in(1)
    • 1.2559 in(2)
    • 1.256 in(2)
    Neck Diameter Min받는 사람Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 19.3 mm(4)
    • 24.3 mm(4)
    • 25.55 mm(3)
    • 26.9 mm(1)
    • 31.9 mm(4)
    Neck Diameter Min받는 사람Neck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • H-HEXAGON 120 (113)
    Insert IC Size
    Insert IC Size
    • 12.7 mm(44)
    • 15.875 mm(64)
    • 19.05 mm(5)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.5 in(44)
    • 0.625 in(64)
    • 0.75 in(5)
    Insert IC Size Min받는 사람Insert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 6.0 mm(1)
    • 6.782 mm(8)
    • 6.8 mm(17)
    • 6.835 mm(14)
    • 6.837 mm(4)
    • 8.495 mm(10)
    • 8.582 mm(18)
    • 8.593 mm(27)
    • 9.17 mm(1)
    • 9.563 mm(8)
    • 10.75 mm(5)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.2362 in(1)
    • 0.267 in(8)
    • 0.269 in(17)
    • 0.2691 in(14)
    • 0.2692 in(4)
    • 0.334 in(6)
    • 0.3345 in(4)
    • 0.3379 in(18)
    • 0.3383 in(27)
    • 0.361 in(1)
    • 0.3765 in(8)
    • 0.4233 in(5)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GD (35)
    • HD (36)
    • LD (30)
    • MM (11)
    Cutting Tool Material
    Cutting Tool Material
    • C N (1)
    • H W (112)
    Tolerance Class
    Tolerance Class
    • D (8)
    • E (1)
    • G (51)
    • M (5)
    • P (48)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (16)
    • SCREW-ON (6)
    • SHELL MILL (136)
    Back-End Diameter
    Back-End Diameter
    • 12.7 mm(2)
    • 19.05 mm(17)
    • 19.069 mm(1)
    • 19.1 mm(2)
    • 20.0 mm(3)
    • 22.0 mm(25)
    • 25.0 mm(9)
    • 25.4 mm(14)
    • 27.0 mm(14)
    • 29.0 mm(6)
    • 31.75 mm(2)
    • 32.0 mm(13)
    • 38.1 mm(16)
    • 40.0 mm(17)
    • 50.8 mm(5)
    • 60.0 mm(7)
    • 63.5 mm(5)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(2)
    • 0.75 in(20)
    • 0.7874 in(3)
    • 0.8661 in(24)
    • 0.867 in(1)
    • 0.9843 in(9)
    • 1.0 in(14)
    • 1.063 in(12)
    • 1.064 in(2)
    • 1.1417 in(6)
    • 1.25 in(2)
    • 1.2598 in(11)
    • 1.26 in(2)
    • 1.5 in(16)
    • 1.5748 in(15)
    • 1.575 in(2)
    • 2.0 in(5)
    • 2.3622 in(7)
    • 2.5 in(5)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    M1200 시리즈
    M1200 맥스
    (24)

    M1200 맥스

    M1200 Mini
    (118)

    M1200 Mini

    M1200 표준
    (129)

    M1200 표준

    구입 희망처

    가까운 공인 WIDIA 대리점을 찾으십시오.

    내 주변 검색
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk