P-Clamping
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (57)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(57)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(57)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(57)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(57)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(57)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(57)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(57)
- M Stainless Steel (57)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(57)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(57)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(57)
- K Cast Iron (57)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(57)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(57)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(57)
- N Non-Ferrous Materials (57)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(57)
- N7MMC's (42)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (57)
- N6Carbon, Graphite Composites, CFRP (57)
- N3High-Silicon Aluminum Alloys Si >12.2%(9)
- N1Wrought Aluminum (57)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (57)
- S High-Temp Alloys (57)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(57)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(57)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(57)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(57)
- H Hardened Materials (34)
- H2Hardened Materials 48-55 HRC(34)
- H4Hardened Materials >60 HRC(31)
- H1Hardened Materials 44-48 HRC(34)
- H3Hardened Materials 56-60 HRC(34)
- C CFRP Materials (57)
- C2CFRP / Aluminium CFRP / Non-Ferrous (42)
- C1CFRP, CFRP / CFRP (57)
Applications
Applications
Facing (49)
Multiple Direction Cutting (36)
Profiling (11)
TRN Boring (36)
Turning (57)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (57)
- Lightly Interrupted Cut (57)
- Smooth Cut (57)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (8)
- 63.0 (4)
- 75.0 (14)
- 90.0 (5)
- 93.0 (11)
- 95.0 (11)
- 107.5 (4)
to
Connection Style
Connection Style
- KM (23)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (50)
- 1.0 (19)
- 2.0 (29)
- 3.0 (9)
- 4.0 (46)
- 6.0 (11)
- 8.0 (29)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.362 in(39)
- 2.3622 in(18)
to
Corner Radius
Corner Radius
- 0.004 in(15)
- 0.008 in(16)
- 0.014 in(10)
- 0.016 in(40)
- 0.024 in(2)
- 0.031 in(57)
- -0.039 in(50)
- 0.047 in(57)
- 0.063 in(48)
- 0.094 in(19)
- 0.125 in(2)
- 0.126 in(3)
- 0.157 in(7)
to
Corner Radius
Corner Radius
- 0.1 mm(15)
- 0.2 mm(16)
- 0.35 mm(10)
- 0.4 mm(40)
- 0.6 mm(2)
- 0.8 mm(57)
- -1.0 mm(50)
- 1.2 mm(57)
- 1.6 mm(48)
- 2.375 mm(6)
- 2.4 mm(19)
- 3.175 mm(2)
- 3.2 mm(3)
- 4.0 mm(7)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (29)
- CW5025 (25)
- K060 (3)
- K090 (7)
- K1 (7)
- K313 (42)
- K68 (40)
- KB1340 (14)
- KB1345 (7)
- KB1610 (13)
- KB1630 (7)
- KB5610 (3)
- KB5630 (3)
- KBH10 (23)
- KBH10B (17)
- KBH20 (23)
- KBH20B (17)
- KBK35 (2)
- KC5010 (56)
- KC5025 (50)
- KC5410 (37)
- KC730 (24)
- KC850 (48)
- KC9125 (1)
- KCK05 (38)
- KCK05B (13)
- KCK15 (50)
- KCK15B (49)
- KCK20 (54)
- KCK20B (43)
- KCM15 (53)
- KCM15B (49)
- KCM25 (51)
- KCM25B (57)
- KCM35 (48)
- KCM35B (31)
- KCP05 (30)
- KCP05B (34)
- KCP10 (57)
- KCP10B (56)
- KCP25 (57)
- KCP25B (57)
- KCP25C (57)
- KCP30 (51)
- KCP30B (40)
- KCP40 (47)
- KCP40B (48)
- KCPK05 (52)
- KCS10 (3)
- KCS10B (53)
- KCU10 (57)
- KCU10B (57)
- KCU25 (57)
- KCU25B (57)
- KD1400 (7)
- KD1405 (3)
- KD1425 (9)
- KS15 (3)
- KT315 (32)
- KT325 (3)
- KTP10 (32)
- KTP25S (19)
- KY1540 (3)
- KY3500 (45)
- KY4300 (12)
- KY4400 (28)
- KYHK15B (34)
- KYK10 (11)
- KYK25 (24)
- KYS25 (7)
- KYS30 (9)
- PB100 (3)
- SP4019 (3)
- THM (23)
- THM-X (17)
- THMF-X (11)
- TN10P (32)
- TN10U (19)
- TN15M (21)
- TN15U (11)
- TN2000 (37)
- TN20K (38)
- TN20P (50)
- TN30M (26)
- TN30P (41)
- TN4000 (37)
- TN6010 (13)
- TTR-X (7)
- TTS (17)
- WBH10P (3)
- WBH10U (3)
- WBH20P (23)
- WBH30P (3)
- WBK40U (4)
- WDN00U (3)
- WDN25U (9)
- WK05CT (56)
- WK15CT (31)
- WK20CT (57)
- WM15CT (50)
- WM25CT (57)
- WM35CT (57)
- WP05CT (5)
- WP15CT (57)
- WP25CT (57)
- WP35CT (48)
- WS10PT (50)
- WS25PT (57)
- WU10HT (50)
- WU10PT (32)
- WU25PT (32)
- X00580 (3)
- X00581 (3)
- X00582 (3)
- X00583 (3)
- X00584 (3)
- X00585 (3)
- X00586 (3)
- X00591 (3)
- X00592 (3)
- X00593 (3)
- X00594 (3)
- X00596 (3)
- X00597 (3)
- X00599 (3)
Hand Of Tool
Hand Of Tool
- L (9)
- N (3)
- R (11)
Wiper Insert
Wiper Insert
- N (57)
- Y (18)
F Dimension
F Dimension
- 0.0 mm(7)
- 27.0 mm(5)
- 43.0 mm(9)
- 59.0 mm(2)
to
F Dimension
F Dimension
- 0.0 in(7)
- 1.063 in(5)
- 1.6929 in(8)
- 1.693 in(1)
- 2.3228 in(1)
- 2.323 in(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- -1.0 mm(17)
- 80.0 mm(29)
- 90.0 mm(2)
- 100.0 mm(3)
- 118.0 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- -1.0 in(17)
- 3.15 in(29)
- 3.543 in(2)
- 3.937 in(3)
- 4.6457 in(1)
- 4.646 in(1)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 in(50)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 mm(50)
to
Cutting Direction
Cutting Direction
- S (23)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (20)
- NEGATIVE-ZERO (3)
Maximum Bore Depth
Maximum Bore Depth
- 2.362 in(35)
- 2.3622 in(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 60.0 mm(36)
to
Boring Bar Material
Boring Bar Material
- S (2)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (12)
- D-DIAMOND/RHOMBIC 55 (17)
- S-SQUARE 90 (17)
- T-TRIANGLE 60 (7)
- W-TRIGON 80 (4)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (20)
- B L (23)
- C A (40)
- C N (45)
- D P (19)
- H T (32)
- H W (57)
Back-End
Connection Type
Connection Type
- TAPER SHANK (23)
System Size
System Size
- KM63TS (23)
No filters matching ""