Drilling
Drilling: Stacked Plates
Drilling - Through Coolant
Tool Dimensions: 2flute/4margin/coolantDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 3899591 |
| ISO katalogové ID | TDD108Z06528 |
| ASI katalogové ID | TDD108Z06528 |
| Grade | WU20PD |
| [D1] Drill Diameter M | 6.528 mm |
| [D1] Drill Diameter M | 0.257 in |
| [D1] Wire Size | F |
| [D] Adapter / Shank / Bore Diameter | 7 mm |
| [D] Adapter / Shank / Bore Diameter | 0.2756 in |
| [L3] Flute Length | 217 mm |
| [L3] Flute Length | 8.5433 in |
| [L4] Maximum Drilling Depth | 202 mm |
| [L4] Maximum Drilling Depth | 7.9528 in |
| [L5] Drill Point Length | 1.362 mm |
| [L5] Drill Point Length | 0.0536 in |
| [L] Overall Length | 267 mm |
| [L] Overall Length | 10.5118 in |
DrillingDrilling: Stacked PlatesDrilling - Through CoolantTool Dimensions: 2flute/4margin/coolantKarbidy
WU20PD
Composition: With a multilayered PVD TiN-TiAlN coating, a high-quality, sub-micron, carbide substrate and a state-of-the-art surface condition, this grade gives the highest level of wear resistance at high cutting speeds.
Application: First choice for alloyed and high-alloyed steels and cast irons. A state-of-the-art surface condition enables superior chip evacuation even when MQL is applied.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Metrické | |||
| Tolerance | |||
| Rozsah nominálních průměrů | Tolerance D1 | Tolerance D1 | Tolerance D h6 |
| 0 000/-0 012 | 0 000/-0 008 | ||
| 0 000/-0 015 | 0 000/-0 009 | ||
| 0 000/-0 018 | 0 000/-0 011 | ||
| Materiálová skupina |  |  | |||||||||||
| Řezná rychlost | Doporučený posuv (fz) podle průměru | ||||||||||||
| Rozsah | |||||||||||||
| Min | Max | Průměr nástroje | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 1 | 90 | – | 130 | mm/ot. | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 |
| 2 | 80 | – | 115 | mm/ot. | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 | |
| 3 | 70 | – | 110 | mm/ot. | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| 4 | 65 | – | 95 | mm/ot. | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| K | 1 | 105 | – | 145 | mm/ot. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 |
| 2 | 85 | – | 120 | mm/ot. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| 3 | 100 | – | 140 | mm/ot. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| | ||||||||||||
| Řezná rychlost | |||||||||||||
| Rozsah | Doporučený posuv (fz) podle průměru | ||||||||||||
| Materiálová skupina | Min | Max | Průměr nástroje | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 1 | 90 | – | 130 | mm/dev. | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 |
| 2 | 80 | – | 115 | mm/dev. | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 | |
| 3 | 70 | – | 110 | mm/dev. | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| 4 | 65 | – | 95 | mm/dev. | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| K | 1 | 105 | – | 145 | mm/dev. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 |
| 2 | 85 | – | 120 | mm/dev. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| 3 | 100 | – | 140 | mm/dev. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| Palcové | |||
| tolerance | |||
| D1 | D1 tolerance m7 | D | D tolerance h6 |
| 0,0000/-0,0005 | 0,0000/-0,0003 | ||
| 0,0000/-0,0006 | 0,0000/-0,0004 | ||
| 0,0000/-0,0007 | 0,0000/-0,0004 | ||
|  |  | |||||||||||
| Řezná rychlost | |||||||||||||
| Rozsah | Doporučený posuv (f) podle průměru | ||||||||||||
| Materiálová skupina | Min | – | Max | Průměr nástroje | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |
| P | 1 | 90 | – | 130 | mm/r | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 |
| 2 | 80 | – | 115 | mm/r | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 | |
| 3 | 70 | – | 110 | mm/r | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| 4 | 65 | – | 95 | mm/r | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| K | 1 | 105 | – | 145 | mm/r | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 |
| 2 | 85 | – | 120 | mm/r | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| – | 3 | 100 | – | 140 | mm/r | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 |
| Materiálová skupina | | | | ||||||||||
| Řezná rychlost | Doporučený posuv (f) podle průměru | ||||||||||||
| Rozsah | |||||||||||||
| Min | – | Max | Průměr nástroje | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 1 | 90 | – | 130 | mm/ot. | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 |
| 2 | 80 | – | 115 | mm/ot. | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 | |
| 3 | 70 | – | 110 | mm/ot. | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| 4 | 65 | – | 95 | mm/ot. | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| K | 1 | 105 | – | 145 | mm/ot. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 |
| 2 | 85 | – | 120 | mm/ot. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| 3 | 100 | – | 140 | mm/ot. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| Metrické | |||
| tolerance | |||
| Rozsah průměrů | D1 tolerance | D1 tolerance | D tolerance h6 |
| 0 000/-0 012 | 0 000/-0 008 | ||
| 0 000/-0 015 | 0 000/-0 009 | ||
| 0 000/-0 018 | 0 000/-0 011 | ||
| Materiálová skupina | | | | ||||||||||
| Řezná rychlost | Doporučený posuv (f) podle průměru | ||||||||||||
| Rozsah řezných rychlostí | |||||||||||||
| Min | – | Max | Průměr nástroje | 0.125 | 0.188 | 0.250 | 0.313 | 0.375 | 0.500 | 0.625 | 0.750 | ||
| P | 1 | 295 | – | 425 | palce/ot. | 0.003–0.005 | 0,005–0,007 | 0,007–0,008 | 0,008–0,009 | 0,009–0,010 | 0,010–0,011 | 0,011–0,012 | 0,012–0,013 |
| 2 | 260 | – | 375 | palce/ot. | 0.003–0.005 | 0,005–0,007 | 0,007–0,008 | 0,008–0,009 | 0,009–0,010 | 0,010–0,011 | 0,011–0,012 | 0,012–0,013 | |
| 3 | 230 | – | 360 | palce/ot. | 0.002–0.004 | 0.004–0.006 | 0,006–0,007 | 0,007–0,008 | 0,008–0,009 | 0,009 | 0,009–0,010 | 0,010–0,011 | |
| 4 | 215 | – | 310 | palce/ot. | 0.002–0.004 | 0.004–0.006 | 0,006–0,007 | 0,007–0,008 | 0,008–0,009 | 0,009 | 0,009–0,010 | 0,010–0,011 | |
| K | 1 | 345 | – | 475 | palce/ot. | 0.004–0.006 | 0.006–0.008 | 0,008–0,010 | 0,010–0,011 | 0,011–0,012 | 0,012–0,013 | 0,013–0,014 | 0,014–0,015 |
| 2 | 280 | – | 390 | palce/ot. | 0.004–0.006 | 0.006–0.008 | 0,008–0,010 | 0,010–0,011 | 0,011–0,012 | 0,012–0,013 | 0,013–0,014 | 0,014–0,015 | |
| 3 | 325 | – | 460 | palce/ot. | 0.004–0.006 | 0.006–0.008 | 0,008–0,010 | 0,010–0,011 | 0,011–0,012 | 0,012–0,013 | 0,013–0,014 | 0,014–0,015 | |
| | | |||||||||||
| Řezná rychlost | |||||||||||||
| Rozsah řezných rychlostí | Doporučený posuv (f) podle průměru | ||||||||||||
| Materiálová skupina | Min | – | Max | Průměr nástroje | 0.125 | 0.188 | 0.250 | 0.313 | 0.375 | 0.500 | 0.625 | 0.750 | |
| P | 1 | 295 | – | 425 | IPR | 0.003–0.005 | 0.005–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 |
| 2 | 260 | – | 375 | IPR | 0.003–0.005 | 0.005–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | |
| 3 | 230 | – | 360 | IPR | 0.002–0.004 | 0.004–0.006 | 0.006–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009 | 0.009–0.010 | 0.010–0.011 | |
| 4 | 215 | – | 310 | IPR | 0.002–0.004 | 0.004–0.006 | 0.006–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009 | 0.009–0.010 | 0.010–0.011 | |
| K | 1 | 345 | – | 475 | IPR | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | 0.013–0.014 | 0.014–0.015 |
| 2 | 280 | – | 390 | IPR | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | 0.013–0.014 | 0.014–0.015 | |
| – | 3 | 325 | – | 460 | IPR | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | 0.013–0.014 | 0.014–0.015 |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?