Laydown Threading
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (6)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(6)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(6)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(6)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(6)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(6)
- M Stainless Steel (6)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(6)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(6)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(6)
- K Cast Iron (6)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(6)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(6)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(6)
- N Non-Ferrous Materials (6)
- N1Wrought Aluminum (6)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(6)
- N3High-Silicon Aluminum Alloys Si >12.2%(6)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (6)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (6)
- N6Carbon, Graphite Composites, CFRP (6)
- N7MMC's (6)
- S High-Temp Alloys (6)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(6)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(6)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(6)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(6)
Type of Thread
Type of Thread
- 55 (6)
- 60 (6)
- ACME (4)
- API (1)
- API BUTTRESS (1)
- API RD (3)
- BSPT (3)
- BSW (6)
- M (6)
- NPT (3)
- NPTF (3)
- RD DIN 405 (6)
- STUB ACME (6)
- TR DIN 103 (4)
- UN (5)
- UNJ (3)
Over All Length [L]
Over All Length [L]
- 2.3622 in(3)
- 2.7559 in(2)
- 4.1339 in(1)
to
Over All Length [L]
Over All Length [L]
- 60.0 mm(3)
- 70.0 mm(2)
- 105.0 mm(1)
to
Corner Radius
Corner Radius
- 0.001 in(3)
- 0.002 in(5)
- 0.003 in(3)
- 0.004 in(3)
- 0.005 in(3)
- 0.006 in(5)
- 0.007 in(3)
- 0.008 in(3)
- 0.009 in(3)
- 0.01 in(3)
- 0.011 in(3)
- 0.012 in(4)
- 0.013 in(3)
- 0.014 in(3)
- 0.016 in(3)
- 0.017 in(1)
- 0.024 in(3)
- 0.028 in(3)
- 0.036 in(1)
- 0.055 in(1)
to
Corner Radius
Corner Radius
- 0.025 mm(3)
- 0.05 mm(5)
- 0.075 mm(3)
- 0.1 mm(3)
- 0.125 mm(3)
- 0.15 mm(5)
- 0.175 mm(3)
- 0.2 mm(3)
- 0.225 mm(3)
- 0.25 mm(3)
- 0.275 mm(3)
- 0.3 mm(4)
- 0.325 mm(3)
- 0.35 mm(3)
- 0.4 mm(3)
- 0.425 mm(1)
- 0.6 mm(3)
- 0.7 mm(3)
- 0.925 mm(1)
- 1.4 mm(1)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC5010 (3)
- KC5025 (6)
- KCU20B (5)
- TN6025 (6)
Hand Of Tool
Hand Of Tool
- L (2)
- R (4)
F Dimension
F Dimension
- 12.0 mm(2)
- 14.0 mm(1)
- 17.0 mm(2)
- 27.0 mm(1)
to
F Dimension
F Dimension
- 0.4724 in(2)
- 0.5512 in(1)
- 0.6693 in(2)
- 1.063 in(1)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 0.7874 in(2)
- 0.9843 in(1)
- 1.2598 in(2)
- 1.9685 in(1)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 20.0 mm(2)
- 25.0 mm(1)
- 32.0 mm(2)
- 50.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 20.0 mm(2)
- 25.0 mm(1)
- 32.0 mm(2)
- 50.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.7874 in(2)
- 0.9843 in(1)
- 1.2598 in(2)
- 1.9685 in(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 1.4173 in(3)
- 1.8504 in(2)
- 3.1496 in(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 36.0 mm(3)
- 47.0 mm(2)
- 80.0 mm(1)
to
No filters matching ""
