Top Thread™ Profiling
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (2)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(2)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(2)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2)
- M Stainless Steel (2)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(2)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(2)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(2)
- K Cast Iron (2)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(2)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2)
- N Non-Ferrous Materials (2)
- N1Wrought Aluminum (2)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2)
- N3High-Silicon Aluminum Alloys Si >12.2%(1)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (2)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2)
- N6Carbon, Graphite Composites, CFRP (2)
- N7MMC's (1)
- S High-Temp Alloys (2)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(2)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(2)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(2)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2)
Applications
Applications
Back Boring (1)
Facing (2)
ID Facing (2)
Multiple Direction Cutting (2)
Profiling (1)
TRN Boring (2)
Turning (2)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (1)
- Lightly Interrupted Cut (2)
- Smooth Cut (2)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 93.0 (1)
- 95.0 (1)
to
Corner Radius
Corner Radius
- 0.005 in(1)
- 0.008 in(2)
- 0.016 in(2)
- 0.02 in(1)
- 0.031 in(2)
- 0.039 in(1)
- 0.047 in(1)
- 0.063 in(1)
to
Corner Radius
Corner Radius
- 0.125 mm(1)
- 0.2 mm(2)
- 0.4 mm(2)
- 0.5 mm(1)
- 0.8 mm(2)
- 1.0 mm(1)
- 1.2 mm(1)
- 1.6 mm(1)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K00326 (1)
- K313 (1)
- K68 (2)
- K8735 (1)
- KC5010 (2)
- KC5025 (1)
- KC5410 (1)
- KC730 (2)
- KC850 (2)
- KCK05 (1)
- KCK15B (1)
- KCM15B (1)
- KCM25 (1)
- KCP10 (1)
- KCP25 (1)
- KCP25B (2)
- KCP25C (2)
- KCS10B (1)
- KCU10 (2)
- KCU10B (2)
- KCU25 (2)
- KCU25B (2)
- KD1425 (1)
- KS15 (1)
- KT315 (1)
F Dimension
F Dimension
- 27.0 mm(1)
- 32.0 mm(1)
to
F Dimension
F Dimension
- 1.063 in(1)
- 1.2598 in(1)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 1.9685 in(1)
- 2.0866 in(1)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 50.0 mm(1)
- 53.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 50.0 mm(1)
- 53.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.9685 in(1)
- 2.0866 in(1)
to
Cutting Direction
Cutting Direction
- E (1)
- P (1)
Maximum Bore Depth
Maximum Bore Depth
- 4.3386 in(1)
- 4.4488 in(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 110.2 mm(1)
- 113.0 mm(1)
to
Front-End
Insert Shape
Insert Shape
- N/K-PARALLELOGRAM 55 (1)
- V-DIAMOND/RHOMBIC 35 (1)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.4728 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 12.01 mm(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- D P (1)
- H T (1)
- H W (2)
No filters matching ""
