Drilling
Drilling: Stacked Plates
Through Coolant: Radial: Drilling
2flute/4margin: coolantDownloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 3899576 |
| Referencia ISO | TDD108Z04039 |
| Referencia ANSI | TDD108Z04039 |
| Calidad | WU20PD |
| Diámetro de broca M [D1] | 4.039 mm |
| Diámetro de broca M [D1] | 0.159 in |
| [D1] Tamaño de cable | 21 |
| Adaptador/Mango/Diá int [D] | 5 mm |
| Adaptador/Mango/Diá int [D] | 0.1969 in |
| Longitud del canal [L3] | 144 mm |
| Longitud del canal [L3] | 5.6693 in |
| Profundidad máxima de taladrado [L4] | 133 mm |
| Profundidad máxima de taladrado [L4] | 5.2362 in |
| Longitud de punta de broca [L5] | 0.827 mm |
| Longitud de punta de broca [L5] | 0.0326 in |
| Longitud total [L] | 199 mm |
| Longitud total [L] | 7.8346 in |
DrillingDrilling: Stacked PlatesThrough Coolant: Radial: Drilling2flute/4margin: coolantGrades
WU20PD
Composición: Con un recubrimiento PVD TiN-TiAlN multicapa, un sustrato de metal duro submicrónico de alta calidad y una condición superficial de última generación, esta calidad proporciona el mayor nivel de resistencia al desgaste a altas velocidades de corte.
Aplicación: Primera opción para aceros aleados y muy aleados así como fundición. Una condición superficial de última generación permite una excelente evacuación de virutas incluso cuando se aplica MQL.
Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Sistema métrico | |||
| tolerancia | |||
| gama de tamaños nominales | D1 tolerancia | D1 tolerancia | D tolerancia h6 |
| 0,000/-0,012 | 0,000/-0,008 | ||
| 0,000/-0,015 | 0,000/-0,009 | ||
| 0,000/-0,018 | 0,000/-0,011 | ||
| Grupo de materiales |  |  | |||||||||||
| Velocidad de corte | Avance recomendado (fz) por diámetro | ||||||||||||
| Rango | |||||||||||||
| Mín | Máx. | diámetro de la herramienta | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 1 | 90 | – | 130 | mm/r | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 |
| 2 | 80 | – | 115 | mm/r | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 | |
| 3 | 70 | – | 110 | mm/r | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| 4 | 65 | – | 95 | mm/r | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| K | 1 | 105 | – | 145 | mm/r | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 |
| 2 | 85 | – | 120 | mm/r | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| 3 | 100 | – | 140 | mm/r | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| | ||||||||||||
| Velocidad de corte | |||||||||||||
| Rango | Avance recomendado (fz) por diámetro | ||||||||||||
| Grupo de materiales | Mín | Máx. | diámetro de la herramienta | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 1 | 90 | – | 130 | mm/dev. | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 |
| 2 | 80 | – | 115 | mm/dev. | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 | |
| 3 | 70 | – | 110 | mm/dev. | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| 4 | 65 | – | 95 | mm/dev. | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| K | 1 | 105 | – | 145 | mm/dev. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 |
| 2 | 85 | – | 120 | mm/dev. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| 3 | 100 | – | 140 | mm/dev. | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| Pulgadas | |||
| Tolerancia | |||
| D1 | D1 tolerancia m7 | D | D tolerancia h6 |
| 0.0000/-0.0005 | 0.0000/-0.0003 | ||
| 0.0000/-0.0006 | 0.0000/-0.0004 | ||
| 0.0000/-0.0007 | 0.0000/-0.0004 | ||
|  |  | |||||||||||
| Velocidad de corte | |||||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Grupo de materiales | Mín | – | Máx. | diámetro de la herramienta | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |
| P | 1 | 90 | – | 130 | mm/r | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 |
| 2 | 80 | – | 115 | mm/r | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 | |
| 3 | 70 | – | 110 | mm/r | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| 4 | 65 | – | 95 | mm/r | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| K | 1 | 105 | – | 145 | mm/r | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 |
| 2 | 85 | – | 120 | mm/r | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| – | 3 | 100 | – | 140 | mm/r | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 |
| Grupo de materiales | | | | ||||||||||
| Velocidad de corte | Avance recomendado (f) por diámetro | ||||||||||||
| Rango | |||||||||||||
| Mín | – | Máx. | diámetro de la herramienta | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 1 | 90 | – | 130 | mm/r | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 |
| 2 | 80 | – | 115 | mm/r | 0,08–0,12 | 0,12–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,34 | |
| 3 | 70 | – | 110 | mm/r | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| 4 | 65 | – | 95 | mm/r | 0,05–0,10 | 0,10–0,16 | 0,16–0,18 | 0,18–0,20 | 0,20–0,22 | 0,22–0,24 | 0,24–0,26 | 0,26–0,28 | |
| K | 1 | 105 | – | 145 | mm/r | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 |
| 2 | 85 | – | 120 | mm/r | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| 3 | 100 | – | 140 | mm/r | 0,10–0,15 | 0,15–0,20 | 0,20–0,25 | 0,25–0,28 | 0,28–0,30 | 0,30–0,33 | 0,33–0,36 | 0,36–0,38 | |
| Sistema métrico | |||
| Tolerancia | |||
| rango de tamaño nominal | D1 tolerancia | D1 tolerancia | D tolerancia h6 |
| 0,000/-0,012 | 0,000/-0,008 | ||
| 0,000/-0,015 | 0,000/-0,009 | ||
| 0,000/-0,018 | 0,000/-0,011 | ||
| Grupo de materiales | | | | ||||||||||
| Velocidad de corte | Avance recomendado (f) por diámetro | ||||||||||||
| Rango | |||||||||||||
| Mín | – | Máx. | diámetro de la herramienta | 0.125 | 0.188 | 0.250 | 0.313 | 0.375 | 0.500 | 0.625 | 0.750 | ||
| P | 1 | 295 | – | 425 | IPR | 0.003–0.005 | 0.005–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 |
| 2 | 260 | – | 375 | IPR | 0.003–0.005 | 0.005–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | |
| 3 | 230 | – | 360 | IPR | 0.002–0.004 | 0.004–0.006 | 0.006–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009 | 0.009–0.010 | 0.010–0.011 | |
| 4 | 215 | – | 310 | IPR | 0.002–0.004 | 0.004–0.006 | 0.006–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009 | 0.009–0.010 | 0.010–0.011 | |
| K | 1 | 345 | – | 475 | IPR | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | 0.013–0.014 | 0.014–0.015 |
| 2 | 280 | – | 390 | IPR | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | 0.013–0.014 | 0.014–0.015 | |
| 3 | 325 | – | 460 | IPR | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | 0.013–0.014 | 0.014–0.015 | |
| | | |||||||||||
| Velocidad de corte | |||||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Grupo de materiales | Mín | – | Máx. | diámetro de la herramienta | 0.125 | 0.188 | 0.250 | 0.313 | 0.375 | 0.500 | 0.625 | 0.750 | |
| P | 1 | 295 | – | 425 | IPR | 0.003–0.005 | 0.005–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 |
| 2 | 260 | – | 375 | IPR | 0.003–0.005 | 0.005–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | |
| 3 | 230 | – | 360 | IPR | 0.002–0.004 | 0.004–0.006 | 0.006–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009 | 0.009–0.010 | 0.010–0.011 | |
| 4 | 215 | – | 310 | IPR | 0.002–0.004 | 0.004–0.006 | 0.006–0.007 | 0.007–0.008 | 0.008–0.009 | 0.009 | 0.009–0.010 | 0.010–0.011 | |
| K | 1 | 345 | – | 475 | IPR | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | 0.013–0.014 | 0.014–0.015 |
| 2 | 280 | – | 390 | IPR | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | 0.013–0.014 | 0.014–0.015 | |
| – | 3 | 325 | – | 460 | IPR | 0.004–0.006 | 0.006–0.008 | 0.008–0.010 | 0.010–0.011 | 0.011–0.012 | 0.012–0.013 | 0.013–0.014 | 0.014–0.015 |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?