VSM490-10 Series - Tool Bodies

Wybierz filtry
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (91)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (91)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (91)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (91)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (91)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (91)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (91)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (91)
  • M Stainless Steel (91)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (91)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (91)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (91)
  • K Cast Iron (91)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (91)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (91)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (91)
  • N Non-Ferrous Materials (91)
    • N1
      Wrought Aluminum (91)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (91)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (91)
  • S High-Temp Alloys (91)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (91)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (91)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (91)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (91)
  • H Hardened Materials (91)
    • H1
      Hardened Materials 44-48 HRC (91)
Select All Star
  • CN (19)
  • DE (42)
  • GB (7)
  • SG (13)
  • US (6)
Applications
Applications
  • Face Milling Face Milling (20)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (20)
  • Shoulder Milling Shoulder Milling (20)
  • Shoulder Roughing Shoulder Roughing (20)
  • Shoulder Square End Shoulder Square End (20)
Cutting Diameter
Cutting Diameter
  • 0.625 in (3)
  • 0.63 in (4)
  • 0.709 in (1)
  • 0.75 in (5)
  • 0.787 in (6)
  • 0.866 in (1)
  • 0.984 in (8)
  • 1.0 in (7)
  • 1.102 in (1)
  • 1.25 in (9)
  • 1.26 in (8)
  • 1.5 in (5)
  • 1.575 in (3)
  • 1.969 in (3)
  • 2.0 in (3)
  • 2.48 in (3)
  • 2.5 in (3)
  • 3.0 in (3)
  • 3.15 in (5)
  • 3.938 in (3)
  • 4.0 in (2)
  • 4.921 in (3)
  • 5.0 in (2)
Cutting Diameter Min do Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.875 mm (3)
  • 16.0 mm (4)
  • 18.0 mm (1)
  • 19.05 mm (5)
  • 20.0 mm (6)
  • 22.0 mm (1)
  • 25.0 mm (8)
  • 25.401 mm (7)
  • 28.0 mm (1)
  • 31.75 mm (9)
  • 32.0 mm (8)
  • 38.1 mm (5)
  • 40.0 mm (3)
  • 50.0 mm (3)
  • 50.801 mm (3)
  • 63.0 mm (3)
  • 63.5 mm (3)
  • 76.2 mm (3)
  • 80.0 mm (5)
  • 100.0 mm (3)
  • 101.601 mm (2)
  • 125.0 mm (3)
  • 127.0 mm (2)
Cutting Diameter Min do Cutting Diameter Max
Reach
Reach
  • 0.845 in (1)
  • 0.85 in (1)
  • 0.9 in (1)
  • 0.984 in (12)
  • 1.0 in (1)
  • 1.102 in (7)
  • 1.22 in (4)
  • 1.25 in (4)
  • 1.26 in (5)
  • 1.47 in (3)
  • 1.575 in (11)
  • 1.577 in (9)
  • 1.6 in (5)
  • 1.693 in (3)
  • 1.72 in (2)
  • 1.75 in (3)
  • 1.901 in (2)
  • 1.969 in (8)
  • 2.0 in (3)
  • 2.221 in (1)
  • 2.38 in (2)
  • 2.48 in (3)
Reach Min do Reach Max
Reach
Reach
  • 21.451 mm (1)
  • 21.6 mm (1)
  • 22.85 mm (1)
  • 25.0 mm (12)
  • 25.401 mm (1)
  • 28.0 mm (7)
  • 31.0 mm (4)
  • 31.75 mm (4)
  • 32.0 mm (5)
  • 37.35 mm (3)
  • 40.0 mm (11)
  • 40.051 mm (9)
  • 40.651 mm (5)
  • 43.0 mm (3)
  • 43.7 mm (2)
  • 44.45 mm (3)
  • 48.25 mm (2)
  • 50.0 mm (8)
  • 50.801 mm (3)
  • 56.401 mm (1)
  • 60.45 mm (2)
  • 63.0 mm (3)
Reach Min do Reach Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (36)
  • Screw-On Connection (5)
  • Straight-Cylindrical (31)
  • Weldon (19)
Number of Flutes
Number of Flutes
  • 10 (5)
  • 12 (2)
  • 14 (2)
  • 2 (12)
  • 3 (16)
  • 4 (19)
  • 5 (13)
  • 6 (6)
  • 7 (6)
  • 8 (6)
  • 9 (4)
Over All Length [L]
Over All Length [L]
  • 1.575 in (9)
  • 1.577 in (9)
  • 1.681 in (1)
  • 1.75 in (3)
  • 1.891 in (1)
  • 1.969 in (8)
  • 2.0 in (2)
  • 2.126 in (1)
  • 2.38 in (2)
  • 2.48 in (3)
  • 2.539 in (2)
  • 2.75 in (1)
  • 2.914 in (1)
  • 3.11 in (3)
  • 3.25 in (4)
  • 3.504 in (4)
  • 3.543 in (2)
  • 3.6 in (2)
  • 3.75 in (3)
  • 3.938 in (2)
  • 4.0 in (4)
  • 4.3 in (3)
  • 4.331 in (2)
  • 4.5 in (1)
  • 5.906 in (5)
  • 6.0 in (3)
  • 6.694 in (3)
  • 6.7 in (2)
  • 7.875 in (2)
  • 8.0 in (3)
Over All Length [L] Min do Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (9)
  • 40.051 mm (9)
  • 42.7 mm (1)
  • 44.45 mm (3)
  • 48.0 mm (1)
  • 50.0 mm (8)
  • 50.801 mm (2)
  • 54.0 mm (1)
  • 60.45 mm (2)
  • 63.0 mm (3)
  • 64.5 mm (2)
  • 69.851 mm (1)
  • 74.0 mm (1)
  • 79.0 mm (3)
  • 82.551 mm (4)
  • 89.0 mm (4)
  • 90.0 mm (2)
  • 91.45 mm (2)
  • 95.25 mm (3)
  • 100.0 mm (2)
  • 101.601 mm (4)
  • 109.226 mm (3)
  • 110.0 mm (2)
  • 114.301 mm (1)
  • 150.0 mm (5)
  • 152.4 mm (3)
  • 170.0 mm (3)
  • 170.175 mm (2)
  • 200.0 mm (2)
  • 203.201 mm (3)
Over All Length [L] Min do Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.016 in (91)
  • 0.031 in (91)
  • 0.047 in (91)
  • 0.063 in (91)
Corner Radius Min do Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (91)
  • 0.8 mm (91)
  • 1.201 mm (91)
  • 1.6 mm (91)
Corner Radius Min do Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WK15CM (91)
  • WK15PM (91)
  • WN25PM (91)
  • WP25PM (91)
  • WP35CM (91)
  • WP40PM (91)
  • WS40PM (91)
  • WU10PM (91)
frontEnd
Neck Diameter
Neck Diameter
  • 0.61 in (1)
  • 0.728 in (4)
  • 0.768 in (3)
  • 0.965 in (8)
  • 0.98 in (3)
  • 1.228 in (2)
Neck Diameter Min do Neck Diameter Max
Neck Diameter
Neck Diameter
  • 15.5 mm (1)
  • 18.5 mm (4)
  • 19.5 mm (3)
  • 24.5 mm (8)
  • 24.901 mm (3)
  • 31.201 mm (2)
Neck Diameter Min do Neck Diameter Max
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (50)
  • SCREW-ON (5)
  • SHELL MILL (36)
Back-End Diameter
Back-End Diameter
  • 13.0 mm (1)
  • 15.875 mm (3)
  • 16.0 mm (7)
  • 18.0 mm (1)
  • 19.05 mm (18)
  • 20.0 mm (8)
  • 21.0 mm (1)
  • 22.0 mm (6)
  • 25.0 mm (12)
  • 25.401 mm (13)
  • 27.0 mm (3)
  • 29.0 mm (2)
  • 31.75 mm (7)
  • 32.0 mm (2)
  • 38.1 mm (5)
  • 40.0 mm (2)
Back-End Diameter Min do Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.512 in (1)
  • 0.625 in (3)
  • 0.63 in (7)
  • 0.709 in (1)
  • 0.75 in (18)
  • 0.787 in (8)
  • 0.828 in (1)
  • 0.866 in (6)
  • 0.984 in (12)
  • 1.0 in (13)
  • 1.063 in (3)
  • 1.143 in (2)
  • 1.25 in (7)
  • 1.26 in (2)
  • 1.5 in (5)
  • 1.575 in (2)
Back-End Diameter Min do Back-End Diameter Max
No filters matching ""
Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?