Wybierz filtry
Filtry
    Wyświetl filtry w
    Metryczne
    Calowe
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (12)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(12)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(12)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(12)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(12)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(12)
    • M Stainless Steel (12)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(12)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(12)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(12)
    • K Cast Iron (12)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(12)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(12)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(12)
    • N Non-Ferrous Materials (12)
      • N1
        Wrought Aluminum (12)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(12)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(12)
    • S High-Temp Alloys (12)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(12)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(12)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(12)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(12)
    • H Hardened Materials (12)
      • H1
        Hardened Materials 44-48 HRC(12)
    Applications
    Applications
    • Face MillingFace Milling (12)
    • PocketPocket (2)
    • Pocket HelicalPocket Helical (2)
    • Pocket MillingPocket Milling (2)
    • Profile MillingProfile Milling (2)
    • RampingRamping (2)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (2)
    • Shoulder MillingShoulder Milling (12)
    • Shoulder RoughingShoulder Roughing (12)
    • Shoulder Square EndShoulder Square End (2)
    • Slot MillingSlot Milling (6)
    • Slot SideSlot Side (2)
    • Slot Square EndSlot Square End (6)
    Cutting Diameter
    Cutting Diameter
    • 1.969 in(2)
    • 2.0 in(4)
    • 2.48 in(2)
    • 2.5 in(2)
    • 3.0 in(1)
    • 3.15 in(1)
    Cutting Diameter MindoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 50.0 mm(2)
    • 50.801 mm(4)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 76.2 mm(1)
    • 80.0 mm(1)
    Cutting Diameter MindoCutting Diameter Max
    Cutting Length
    Cutting Length
    • 60.401 mm(5)
    • 74.2 mm(1)
    • 75.0 mm(5)
    • 104.601 mm(1)
    Cutting Length MindoCutting Length Max
    Cutting Length
    Cutting Length
    • 2.378 in(5)
    • 2.922 in(1)
    • 2.953 in(5)
    • 4.118 in(1)
    Cutting Length MindoCutting Length Max
    Reach
    Reach
    • 3.346 in(2)
    • 3.5 in(3)
    • 3.938 in(3)
    • 4.0 in(3)
    • 5.5 in(1)
    Reach MindoReach Max
    Reach
    Reach
    • 85.0 mm(2)
    • 88.9 mm(3)
    • 100.0 mm(3)
    • 101.601 mm(3)
    • 139.701 mm(1)
    Reach MindoReach Max
    Number of Flutes
    Number of Flutes
    • 4 (6)
    • 5 (6)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (12)
    • 2.0 (12)
    Cutting Edges Per Insert MindoCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 3.346 in(2)
    • 3.5 in(3)
    • 3.938 in(3)
    • 4.0 in(3)
    • 5.5 in(1)
    Over All Length [L] MindoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 85.0 mm(2)
    • 88.9 mm(3)
    • 100.0 mm(3)
    • 101.601 mm(3)
    • 139.701 mm(1)
    Over All Length [L] MindoOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(12)
    • 0.031 in(12)
    • 0.047 in(12)
    • 0.063 in(12)
    • 0.079 in(12)
    • 0.095 in(12)
    • 0.126 in(12)
    • 0.157 in(12)
    • 0.237 in(12)
    Corner Radius MindoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(12)
    • 0.8 mm(12)
    • 1.201 mm(12)
    • 1.6 mm(12)
    • 2.0 mm(12)
    • 2.401 mm(12)
    • 3.2 mm(12)
    • 4.0 mm(12)
    • 6.0 mm(12)
    Corner Radius MindoCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WK15CM (12)
    • WK15PM (12)
    • WN10HM (12)
    • WN25PM (12)
    • WP25PM (12)
    • WP35CM (12)
    • WP40PM (12)
    • WS40PM (12)
    • WU20PM (12)
    • WU35PM (12)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 1.6 (1)
    • 1.7 (1)
    • 2.1 (4)
    • 2.8 (4)
    • 3.0 (2)
    Maximum Ramp Angle MindoMaximum Ramp Angle Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(2)
    • 22.0 mm(2)
    • 25.401 mm(4)
    • 27.0 mm(2)
    • 31.75 mm(1)
    • 32.0 mm(1)
    Back-End Diameter MindoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(2)
    • 0.866 in(2)
    • 1.0 in(4)
    • 1.063 in(2)
    • 1.25 in(1)
    • 1.26 in(1)
    Back-End Diameter MindoBack-End Diameter Max
    No filters matching ""
    Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
    product-image
    Please adjust the following properties from

    Oznaczenie katalogowe ISO

    Oznaczenie katalogowe ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
    Session expired due to inactivity, please login again
    Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
    produkty dodane do koszyka

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberOznaczenie katalogowe ISOGatunek  

    You are about to leave the Solution building process.

    Are you sure you want to leave?