Witamy
Potwierdź swoje preferencje
Aktualizuj preferencje

Sugestie dotyczące produktów

Product Family suggestions

WIDIA do usług

Czy masz pytanie dotyczące konkretnego produktu?

Zobacz pełną listę światowych specjalistów ds. usług według obszaru wiedzy specjalistycznej

Szybkie zamówienie
Pozycje pomyślnie dodano do koszyka
Wyświetl koszyk
Wróć

Edytuj

Dodaj

Nazwa : {{SolutionName}}

Monolityczny węglik spiekany H/P • Obróbka wykańczająca

Wybierz filtry
Filters
Filtry
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (111)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (111)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (111)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (111)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (111)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (110)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (96)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (96)
  • M Stainless Steel (111)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (111)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (110)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (96)
  • K Cast Iron (111)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (111)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (110)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (96)
  • N Non-Ferrous Materials (14)
    • N1
      Wrought Aluminum
      (14)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (14)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (11)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (11)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (14)
    • N6
      Carbon, Graphite Composites, CFRP
      (14)
  • S High-Temp Alloys (96)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (96)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (96)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (96)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (96)
  • H Hardened Materials (97)
    • H1
      Hardened Materials 44-48 HRC
      (97)
    • H2
      Hardened Materials 48-55 HRC
      (10)
Select All Star
  • CN (9)
  • DE (18)
  • GB (11)
  • SG (6)
  • US (32)
Applications
Applications
  • Pocket Pocket (57)
  • Pocket Helical Pocket Helical (76)
  • Pocket Milling Pocket Milling (68)
  • Pocket Plunge Milling Pocket Plunge Milling (11)
  • Profile Milling Profile Milling (3)
  • Ramping Ramping (45)
  • Shoulder Ball Nose Shoulder Ball Nose (14)
  • Shoulder Milling Shoulder Milling (89)
  • Shoulder Roughing Shoulder Roughing (24)
  • Shoulder Square End Shoulder Square End (99)
  • Slot Ball Nose Slot Ball Nose (14)
  • Slot Milling Slot Milling (44)
  • Slot Square End Slot Square End (46)
Cutting Diameter
Cutting Diameter
  • 0.039 in (2)
  • 0.06 in (2)
  • 0.079 in (3)
  • 0.098 in (3)
  • 0.119 in (7)
  • 0.125 in (2)
  • 0.138 in (2)
  • 0.157 in (8)
  • 0.177 in (1)
  • 0.188 in (2)
  • 0.197 in (5)
  • 0.237 in (10)
  • 0.25 in (8)
  • 0.313 in (2)
  • 0.315 in (10)
  • 0.375 in (6)
  • 0.394 in (10)
  • 0.473 in (11)
  • 0.5 in (8)
  • 0.551 in (3)
  • 0.625 in (3)
  • 0.63 in (8)
  • 0.709 in (1)
  • 0.75 in (9)
  • 0.787 in (4)
  • 0.984 in (1)
  • 1.0 in (5)
Cutting Diameter Min do Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 1.0 mm (2)
  • 1.5 mm (2)
  • 2.0 mm (3)
  • 2.5 mm (3)
  • 3.0 mm (7)
  • 3.176 mm (2)
  • 3.5 mm (2)
  • 4.0 mm (8)
  • 4.5 mm (1)
  • 4.775 mm (2)
  • 5.0 mm (5)
  • 6.0 mm (10)
  • 6.351 mm (8)
  • 7.95 mm (2)
  • 8.0 mm (10)
  • 9.525 mm (6)
  • 10.0 mm (10)
  • 12.0 mm (11)
  • 12.701 mm (8)
  • 14.0 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (8)
  • 18.0 mm (1)
  • 19.05 mm (9)
  • 20.0 mm (4)
  • 25.0 mm (1)
  • 25.401 mm (5)
Cutting Diameter Min do Cutting Diameter Max
Cutting Length
Cutting Length
  • 3.0 mm (8)
  • 4.0 mm (4)
  • 5.0 mm (4)
  • 6.0 mm (1)
  • 7.0 mm (5)
  • 8.0 mm (3)
  • 9.0 mm (3)
  • 9.5 mm (1)
  • 9.525 mm (2)
  • 10.0 mm (3)
  • 11.0 mm (4)
  • 11.125 mm (1)
  • 12.0 mm (6)
  • 12.701 mm (5)
  • 13.0 mm (4)
  • 14.0 mm (4)
  • 15.875 mm (4)
  • 16.0 mm (4)
  • 19.0 mm (4)
  • 19.05 mm (3)
  • 20.0 mm (2)
  • 20.651 mm (1)
  • 22.0 mm (9)
  • 22.225 mm (3)
  • 25.0 mm (3)
  • 25.401 mm (2)
  • 26.0 mm (8)
  • 28.576 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (7)
  • 38.0 mm (3)
  • 38.1 mm (7)
  • 45.0 mm (1)
  • 50.801 mm (2)
  • 57.151 mm (5)
  • 76.2 mm (2)
  • 101.601 mm (1)
Cutting Length Min do Cutting Length Max
Cutting Length
Cutting Length
  • 0.119 in (8)
  • 0.157 in (4)
  • 0.197 in (4)
  • 0.237 in (1)
  • 0.276 in (5)
  • 0.315 in (3)
  • 0.354 in (3)
  • 0.374 in (1)
  • 0.375 in (2)
  • 0.394 in (3)
  • 0.433 in (4)
  • 0.438 in (1)
  • 0.473 in (6)
  • 0.5 in (5)
  • 0.512 in (4)
  • 0.551 in (4)
  • 0.625 in (4)
  • 0.63 in (4)
  • 0.748 in (4)
  • 0.75 in (3)
  • 0.787 in (2)
  • 0.814 in (1)
  • 0.866 in (9)
  • 0.875 in (3)
  • 0.984 in (3)
  • 1.0 in (2)
  • 1.024 in (8)
  • 1.125 in (2)
  • 1.25 in (5)
  • 1.26 in (7)
  • 1.496 in (3)
  • 1.5 in (7)
  • 1.772 in (1)
  • 2.0 in (2)
  • 2.25 in (5)
  • 3.0 in (2)
  • 4.0 in (1)
Cutting Length Min do Cutting Length Max
Reach
Reach
  • 0.119 in (7)
  • 0.157 in (3)
  • 0.197 in (3)
  • 0.237 in (1)
  • 0.276 in (3)
  • 0.315 in (3)
  • 0.354 in (2)
  • 0.374 in (1)
  • 0.375 in (2)
  • 0.394 in (3)
  • 0.433 in (3)
  • 0.438 in (1)
  • 0.473 in (5)
  • 0.5 in (5)
  • 0.512 in (4)
  • 0.551 in (4)
  • 0.625 in (4)
  • 0.63 in (3)
  • 0.748 in (4)
  • 0.75 in (3)
  • 0.787 in (1)
  • 0.814 in (1)
  • 0.866 in (7)
  • 0.875 in (3)
  • 0.984 in (1)
  • 1.0 in (2)
  • 1.024 in (8)
  • 1.125 in (2)
  • 1.25 in (5)
  • 1.26 in (5)
  • 1.379 in (2)
  • 1.496 in (3)
  • 1.5 in (7)
  • 1.575 in (2)
  • 1.772 in (1)
  • 1.969 in (2)
  • 2.0 in (2)
  • 2.25 in (5)
  • 2.362 in (2)
  • 3.0 in (2)
  • 4.0 in (1)
Reach Min do Reach Max
Reach
Reach
  • 3.0 mm (7)
  • 4.0 mm (3)
  • 5.0 mm (3)
  • 6.0 mm (1)
  • 7.0 mm (3)
  • 8.0 mm (3)
  • 9.0 mm (2)
  • 9.5 mm (1)
  • 9.525 mm (2)
  • 10.0 mm (3)
  • 11.0 mm (3)
  • 11.125 mm (1)
  • 12.0 mm (5)
  • 12.701 mm (5)
  • 13.0 mm (4)
  • 14.0 mm (4)
  • 15.875 mm (4)
  • 16.0 mm (3)
  • 19.0 mm (4)
  • 19.05 mm (3)
  • 20.0 mm (1)
  • 20.651 mm (1)
  • 22.0 mm (7)
  • 22.225 mm (3)
  • 25.0 mm (1)
  • 25.401 mm (2)
  • 26.0 mm (8)
  • 28.576 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (5)
  • 35.0 mm (2)
  • 38.0 mm (3)
  • 38.1 mm (7)
  • 40.0 mm (2)
  • 45.0 mm (1)
  • 50.0 mm (2)
  • 50.801 mm (2)
  • 57.151 mm (5)
  • 60.0 mm (2)
  • 76.2 mm (2)
  • 101.601 mm (1)
Reach Min do Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (135)
Tool Cutting Edge Angle Min do Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Straight-Cylindrical (82)
  • Weldon (54)
Number of Flutes
Number of Flutes
  • 2 (14)
  • 3 (58)
  • 4 (2)
  • 5 (16)
  • 6 (42)
  • 8 (4)
cornerConfiguration
Corner Style
Corner Style
  • BALL NOSE (14)
  • CHAMFER (8)
  • RADIUS (12)
  • SQUARE END (102)
Corner Radius
Corner Radius
  • 0.0 in (110)
  • 0.01 in (4)
  • 0.019 in (6)
  • 0.02 in (1)
  • 0.03 in (3)
  • 0.039 in (1)
  • 0.06 in (1)
  • 0.079 in (1)
  • 0.098 in (1)
  • 0.119 in (1)
  • 0.157 in (1)
  • 0.197 in (2)
  • 0.237 in (2)
  • 0.315 in (2)
Corner Radius Min do Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (110)
  • 0.25 mm (4)
  • 0.45 mm (6)
  • 0.5 mm (1)
  • 0.75 mm (3)
  • 1.0 mm (1)
  • 1.5 mm (1)
  • 2.0 mm (1)
  • 2.5 mm (1)
  • 3.0 mm (1)
  • 4.0 mm (1)
  • 5.0 mm (2)
  • 6.0 mm (2)
  • 8.0 mm (2)
Corner Radius Min do Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (128)
  • 0.1 mm (5)
  • 0.2 mm (1)
  • 0.301 mm (2)
Corner Chamfer Min do Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (128)
  • 0.004 in (5)
  • 0.008 in (1)
  • 0.012 in (2)
Corner Chamfer Min do Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TIALN (36)
  • TIALN-LW (6)
  • TICN-CT (5)
  • UNCOATED (4)
  • WP15PE (85)
Rough Finish
Rough Finish
  • F (109)
  • FR (27)
frontEnd
Neck Diameter
Neck Diameter
  • 0.222 in (1)
  • 0.296 in (1)
  • 0.37 in (1)
  • 0.374 in (1)
  • 0.444 in (1)
  • 0.453 in (1)
  • 0.593 in (1)
  • 0.61 in (1)
Neck Diameter Min do Neck Diameter Max
Neck Diameter
Neck Diameter
  • 5.65 mm (1)
  • 7.525 mm (1)
  • 9.4 mm (1)
  • 9.5 mm (1)
  • 11.275 mm (1)
  • 11.5 mm (1)
  • 15.05 mm (1)
  • 15.5 mm (1)
Neck Diameter Min do Neck Diameter Max
Center Cutting
Center Cutting
backEnd
Back-End Diameter
Back-End Diameter
  • 3.176 mm (2)
  • 4.0 mm (8)
  • 4.775 mm (2)
  • 6.0 mm (35)
  • 6.351 mm (8)
  • 7.95 mm (2)
  • 8.0 mm (10)
  • 9.525 mm (6)
  • 10.0 mm (10)
  • 12.0 mm (11)
  • 12.701 mm (8)
  • 14.0 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (8)
  • 18.0 mm (1)
  • 19.05 mm (9)
  • 20.0 mm (4)
  • 25.0 mm (1)
  • 25.401 mm (5)
Back-End Diameter Min do Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.125 in (2)
  • 0.157 in (8)
  • 0.188 in (2)
  • 0.237 in (35)
  • 0.25 in (8)
  • 0.313 in (2)
  • 0.315 in (10)
  • 0.375 in (6)
  • 0.394 in (10)
  • 0.473 in (11)
  • 0.5 in (8)
  • 0.551 in (3)
  • 0.625 in (3)
  • 0.63 in (8)
  • 0.709 in (1)
  • 0.75 in (9)
  • 0.787 in (4)
  • 0.984 in (1)
  • 1.0 in (5)
Back-End Diameter Min do Back-End Diameter Max
No filters matching ""
Zobacz produkty w
Metryczne
Calowe

ORYGINALNY PRODUKT

Finishers • Series 4S07 • Sharp Edge • Inch Finishers • Series 4S07 • Sharp Edge • Inch

Series 4S07 • Inch
(7 Products)
  • Ramping: BlankRamping: Blank
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Corner Style: Square EndCorner Style: Square End
  • Helix Angle: 45°Helix Angle: 45°
  • Tool Dimensions: Flute Configuration: 6Tool Dimensions: Flute Configuration: 6
  • Shank - Cylindrical PlainShank - Cylindrical Plain
Zobacz produkty
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length
5577255 4S0707002ST 4S0707002ST WP15PE   Straight-Cylindrical 6 6.3500 .2500 6.35 .25 19.0500 .7500 63.5000 2.500
    Cena katalogowa:
    $48.27 /każdy
    Twoja cena::
    5577256 4S0708003ST 4S0708003ST WP15PE   Straight-Cylindrical 6 7.9380 .3125 7.938 .3125 20.6380 .8125 63.5000 2.500
      Cena katalogowa:
      $55.70 /każdy
      Twoja cena::
      5577254 4S0710004ST 4S0710004ST WP15PE   Straight-Cylindrical 6 9.5250 .3750 9.525 .375 22.2250 .8750 63.5000 2.500
        Cena katalogowa:
        $66.84 /każdy
        Twoja cena::
        5577258 4S0713005ST 4S0713005ST WP15PE   Straight-Cylindrical 6 12.7000 .5000 12.7 .5 25.4000 1.000 76.2000 3.000
          Cena katalogowa:
          $113.24 /każdy
          Twoja cena::
          5577259 4S0716006ST 4S0716006ST WP15PE   Straight-Cylindrical 6 15.8750 .6250 15.875 .625 31.7500 1.250 88.9000 3.500
            Cena katalogowa:
            $229.29 /każdy
            Twoja cena::
            5577260 4S0719007ST 4S0719007ST WP15PE   Straight-Cylindrical 6 19.0500 .7500 19.05 .75 38.1000 1.500 101.6000 4.000
              Cena katalogowa:
              $318.02 /każdy
              Twoja cena::
              Cena katalogowa:
              Rabat: %
              Twoja cena::
              Pracownik zastępczy Ten produkt jest niedostępny
              Produkt zastępczy Ten produkt może być dostępny u dystrybutora

              ORYGINALNY PRODUKT

              Narzędzia do obróbki wykańczającej • Seria 4503 JJ • Ostra krawędź • JIS Narzędzia do obróbki wykańczającej • Seria 4503 JJ • Ostra krawędź • JIS

              Seria 4503 JJ • Metryczne
              (16 Products)
              • 3857138571
              • Helix Angle: 45°Helix Angle: 45°
              • Corner Style: Square EndCorner Style: Square End
              • 3852638526
              • Slotting: Square EndSlotting: Square End
              • Ramping: BlankRamping: Blank
              • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
              • Shank - Cylindrical PlainShank - Cylindrical Plain
              Zobacz produkty
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Z] Number of Flutes
              5559171 450301501T 450301501T WP15PE   Straight-Cylindrical 1.5000 .0591 4.0 .1575 3.0000 .1181 50.0000 1.968 3
                Cena katalogowa:
                $25.78 /każdy
                Twoja cena::