Mocowanie S

Wybierz filtry
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (14)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (14)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (14)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (14)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (14)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (14)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (14)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (14)
  • M Stainless Steel (14)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (14)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (14)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (14)
  • K Cast Iron (14)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (14)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (14)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (14)
  • N Non-Ferrous Materials (14)
    • N1
      Wrought Aluminum (14)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (14)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (14)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (14)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (14)
    • N6
      Carbon, Graphite Composites, CFRP (14)
    • N7
      MMC's (14)
  • S High-Temp Alloys (14)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (14)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (14)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (14)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (14)
  • H Hardened Materials (14)
    • H1
      Hardened Materials 44-48 HRC (14)
    • H2
      Hardened Materials 48-55 HRC (14)
    • H3
      Hardened Materials 56-60 HRC (14)
    • H4
      Hardened Materials >60 HRC (14)
  • C CFRP Materials (14)
    • C1
      CFRP, CFRP / CFRP (14)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (14)
Applications
Applications
  • Facing Facing (14)
  • ID Thread Turning ID Thread Turning (1)
  • Multiple Direction Cutting Multiple Direction Cutting (14)
  • Profiling Profiling (14)
  • TRN Boring TRN Boring (14)
  • Threading Threading (1)
  • Turning Turning (14)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (14)
  • Lightly Interrupted Cut (14)
  • Smooth Cut (14)
  • Varying Depth of Cut (14)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 93.0 (5)
  • 95.0 (9)
Tool Cutting Edge Angle Min do Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (14)
  • 2.0 (14)
  • 4.0 (9)
Cutting Edges Per Insert Min do Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 1.969 in (2)
  • 2.362 in (3)
  • 2.757 in (5)
  • 3.15 in (4)
Over All Length [L] Min do Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 50.0 mm (2)
  • 60.0 mm (3)
  • 70.0 mm (5)
  • 80.0 mm (4)
Over All Length [L] Min do Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (14)
  • 0.008 in (14)
  • 0.016 in (14)
  • 0.031 in (14)
  • 0.047 in (7)
Corner Radius Min do Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (14)
  • 0.2 mm (14)
  • 0.4 mm (14)
  • 0.8 mm (14)
  • 1.201 mm (7)
Corner Radius Min do Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CG5 (5)
  • CM1 (5)
  • K313 (14)
  • K68 (14)
  • KB1345 (2)
  • KB1610 (11)
  • KB1625 (2)
  • KB1630 (7)
  • KB5610 (9)
  • KB5625 (5)
  • KB5630 (5)
  • KB9610 (10)
  • KBH20 (9)
  • KC250 (4)
  • KC5010 (14)
  • KC5025 (14)
  • KC5410 (14)
  • KC710 (4)
  • KC720 (14)
  • KC730 (14)
  • KC7310 (4)
  • KC732 (14)
  • KC8050 (14)
  • KC810 (14)
  • KC850 (14)
  • KC9010 (11)
  • KC9025 (14)
  • KC910 (14)
  • KC9105 (11)
  • KC9110 (14)
  • KC9120 (11)
  • KC9125 (14)
  • KC9225 (14)
  • KC9240 (14)
  • KC9240NEW (14)
  • KC9315 (14)
  • KC9320 (11)
  • KC9325 (11)
  • KC935 (14)
  • KC950 (11)
  • KC990 (14)
  • KCD25 (14)
  • KCK05 (14)
  • KCK05B (2)
  • KCK15 (11)
  • KCK15B (11)
  • KCK20 (14)
  • KCK20B (14)
  • KCM15 (14)
  • KCM15B (9)
  • KCM25 (14)
  • KCM25B (11)
  • KCM35 (7)
  • KCP05 (14)
  • KCP10 (14)
  • KCP10B (14)
  • KCP25 (14)
  • KCP25B (14)
  • KCP25C (14)
  • KCP30 (14)
  • KCPK05 (4)
  • KCS10 (14)
  • KCS10B (14)
  • KCU10 (14)
  • KCU10B (14)
  • KCU25 (14)
  • KCU25B (14)
  • KD050 (11)
  • KD100 (14)
  • KD105 (12)
  • KD120 (11)
  • KD1400 (14)
  • KD1405 (14)
  • KD1425 (14)
  • KT125 (4)
  • KT150 (4)
  • KT175 (14)
  • KT315 (14)
  • KTP10 (14)
  • KU10 (9)
  • KU10T (14)
  • KU30T (11)
  • W00162 (4)
  • WBH10C (5)
  • WBH10P (9)
  • WBH10U (9)
  • WBH25P (12)
  • WBH30P (9)
  • WDN00U (14)
  • WDN25U (14)
  • WK20CT (11)
  • WM15CT (12)
  • WM25CT (9)
  • WP15CT (9)
  • WP25CT (14)
Hand Of Tool
Hand Of Tool
  • L (8)
  • R (6)
Wiper Insert
Wiper Insert
  • N (14)
  • Y (14)
F Dimension
F Dimension
  • 7.0 mm (2)
  • 9.0 mm (3)
  • 11.0 mm (2)
  • 13.0 mm (4)
  • 17.0 mm (3)
F Dimension Min do F Dimension Max
F Dimension
F Dimension
  • 0.276 in (2)
  • 0.354 in (3)
  • 0.433 in (2)
  • 0.512 in (4)
  • 0.669 in (3)
F Dimension Min do F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 13.0 mm (2)
  • 16.0 mm (3)
  • 20.0 mm (2)
  • 25.0 mm (4)
  • 32.0 mm (3)
Minimum Axial Groove Diameter Min do Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.512 in (2)
  • 0.63 in (3)
  • 0.787 in (2)
  • 0.984 in (4)
  • 1.26 in (3)
Minimum Axial Groove Diameter Min do Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (10)
  • E (4)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (2)
  • NEUTRAL (ZERO) (6)
  • POSITIVE-ZERO (6)
Maximum Bore Depth
Maximum Bore Depth
  • 1.379 in (2)
  • 1.655 in (1)
  • 1.701 in (2)
  • 2.205 in (2)
  • 2.283 in (3)
  • 2.362 in (4)
Maximum Bore Depth Min do Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 35.0 mm (2)
  • 42.0 mm (1)
  • 43.2 mm (2)
  • 56.0 mm (2)
  • 58.0 mm (3)
  • 60.0 mm (4)
Maximum Bore Depth Min do Maximum Bore Depth Max
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (9)
  • D-DIAMOND/RHOMBIC 55 (5)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.119 in (3)
  • 0.177 in (2)
Maximum Cutting Depth Min do Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 3.0 mm (3)
  • 4.5 mm (2)
Maximum Cutting Depth Min do Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (11)
  • B L (14)
  • D P (14)
  • H T (14)
  • H W (14)
backEnd
System Size
System Size
  • KM32 (12)
  • KM32TS (2)
No filters matching ""
Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?