Witamy
Potwierdź swoje preferencje
Aktualizuj preferencje

Sugestie dotyczące produktów

Product Family suggestions

WIDIA do usług

Czy masz pytanie dotyczące konkretnego produktu?

Zobacz pełną listę światowych specjalistów ds. usług według obszaru wiedzy specjalistycznej

Szybkie zamówienie
Pozycje pomyślnie dodano do koszyka
Wyświetl koszyk

WGC – narzędzia do przecinania i obróbki rowków

Turning Grooving Icon

Obróbka rowków:

  • Pierwszy wybór do zewnętrznej rowkowania w większości przedmiotów obrabianych 
  • Możliwość wewnętrznego doprowadzania chłodziwa i efektywne podawanie chłodziwa zwiększają wydajność 
  • Szerokość rowka: 2–10 mm (0,084”–0,399”)
Turning Cut-Off Icon

Przecinanie:

  • Łamacze wióra zaprojektowane specjalnie do skutecznego przecinania i obróbki głębokich rowków 
  • Geometria dodatnia zapewniająca niższe siły
  • Szerokość rowka: 1,4–8 mm (0,055”–0,315”)
Turning Profiling Icon

Obróbka kształtowa:

  • Łamacz wiórów o pełnym promieniu do toczenia wielokierunkowego na potrzeby tworzenia złożonych profili 
  • Sztywna konstrukcja pozwalająca uzyskać gładką powierzchnię obrobioną 
  • 2–8 mm (0,079”–0,315”)
Zobacz katalog online WIDIA Advances 2020 Catalog Cover (EN | Inch)

Najnowsze technologie – wymiary w calach (2020)

Zobacz katalog online
Zobacz katalog online WIDIA Advances 2020 Catalog Cover (EN | Metric)

Najnowsze technologie – wymiary metryczne (2020)

Zobacz katalog online

 

 

Wybierz filtry
Filters
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (427)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (427)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (427)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (427)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (427)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (427)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (427)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (427)
  • M Stainless Steel (427)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (427)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (427)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (427)
  • K Cast Iron (419)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (419)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (419)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (419)
  • N Non-Ferrous Materials (419)
    • N1
      Wrought Aluminum (419)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (419)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (419)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (419)
    • N6
      Carbon, Graphite Composites, CFRP (419)
  • S High-Temp Alloys (427)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (427)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (427)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (427)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (427)
  • H Hardened Materials (191)
    • H1
      Hardened Materials 44-48 HRC (191)
    • H2
      Hardened Materials 48-55 HRC (191)
Select All Star
  • CN (37)
  • DE (55)
  • GB (18)
  • IN (2)
  • SG (53)
  • US (95)
Applications
Applications
  • Back Boring Back Boring (54)
  • Boring Boring (9)
  • Chamfer Turning Chamfer Turning (36)
  • Cut-Off Cut-Off (316)
  • Deep Grooving Deep Grooving (36)
  • Face Grooving Face Grooving (75)
  • Facing Facing (124)
  • Grooving Grooving (174)
  • ID Facing ID Facing (86)
  • ID Grooving ID Grooving (95)
  • Multiple Direction Cutting Multiple Direction Cutting (20)
  • Plunge Turning Plunge Turning (83)
  • Profiling Profiling (124)
  • TRN Boring TRN Boring (32)
  • Turning Turning (144)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (321)
  • Lightly Interrupted Cut (321)
  • Smooth Cut (321)
  • Varying Depth of Cut (321)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (273)
Tool Cutting Edge Angle Min do Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (32)
  • Cutoff Support Blade A1-A3 (15)
  • Toolholder (180)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (383)
Cutting Edges Per Insert Min do Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.881 in (10)
  • 1.954 in (4)
  • 2.037 in (4)
  • 2.274 in (4)
  • 2.301 in (4)
  • 2.347 in (4)
  • 2.431 in (2)
  • 2.551 in (8)
  • 2.584 in (2)
  • 2.668 in (4)
  • 3.386 in (1)
  • 3.553 in (3)
  • 3.938 in (1)
  • 4.271 in (2)
  • 4.331 in (2)
  • 4.341 in (5)
  • 4.5 in (36)
  • 4.771 in (2)
  • 4.921 in (29)
  • 5.0 in (2)
  • 5.021 in (10)
  • 5.19 in (1)
  • 5.463 in (2)
  • 5.508 in (6)
  • 5.64 in (3)
  • 5.771 in (1)
  • 5.89 in (1)
  • 5.906 in (30)
  • 5.915 in (8)
  • 5.961 in (6)
  • 5.974 in (3)
  • 6.0 in (60)
  • 6.005 in (8)
  • 6.25 in (2)
  • 6.299 in (2)
  • 6.694 in (22)
  • 6.703 in (2)
  • 7.0 in (14)
  • 7.087 in (4)
  • 7.875 in (12)
  • 8.0 in (6)
  • 10.236 in (1)
Over All Length [L] Min do Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 47.75 mm (10)
  • 49.625 mm (4)
  • 51.75 mm (4)
  • 57.75 mm (4)
  • 58.426 mm (4)
  • 59.625 mm (4)
  • 61.75 mm (2)
  • 64.775 mm (8)
  • 65.625 mm (2)
  • 67.75 mm (4)
  • 86.0 mm (1)
  • 90.25 mm (3)
  • 100.0 mm (1)
  • 108.45 mm (2)
  • 110.0 mm (2)
  • 110.25 mm (5)
  • 114.301 mm (36)
  • 121.15 mm (2)
  • 125.0 mm (29)
  • 127.0 mm (2)
  • 127.5 mm (10)
  • 131.826 mm (1)
  • 138.75 mm (2)
  • 139.9 mm (6)
  • 143.25 mm (3)
  • 146.55 mm (1)
  • 149.6 mm (1)
  • 150.0 mm (30)
  • 150.25 mm (8)
  • 151.4 mm (6)
  • 151.75 mm (3)
  • 152.4 mm (60)
  • 152.5 mm (8)
  • 158.75 mm (2)
  • 160.0 mm (2)
  • 170.0 mm (22)
  • 170.25 mm (2)
  • 177.8 mm (14)
  • 180.0 mm (4)
  • 200.0 mm (12)
  • 203.201 mm (6)
  • 260.0 mm (1)
Over All Length [L] Min do Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.003 in (26)
  • 0.004 in (145)
  • 0.006 in (74)
  • 0.008 in (234)
  • 0.012 in (61)
  • 0.014 in (81)
  • 0.016 in (215)
  • 0.031 in (143)
  • 0.039 in (68)
  • 0.047 in (40)
  • 0.06 in (67)
  • 0.063 in (67)
  • 0.079 in (49)
  • 0.094 in (49)
  • 0.098 in (26)
  • 0.119 in (32)
  • 0.125 in (32)
  • 0.156 in (23)
  • 0.157 in (23)
Corner Radius Min do Corner Radius Max
Corner Radius
Corner Radius
  • 0.076 mm (26)
  • 0.1 mm (145)
  • 0.151 mm (74)
  • 0.2 mm (234)
  • 0.301 mm (61)
  • 0.325 mm (81)
  • 0.4 mm (215)
  • 0.775 mm (49)
  • 0.8 mm (142)
  • 1.0 mm (68)
  • 1.201 mm (40)
  • 1.5 mm (67)
  • 1.6 mm (67)
  • 2.0 mm (49)
  • 2.375 mm (49)
  • 2.5 mm (26)
  • 3.0 mm (32)
  • 3.176 mm (32)
  • 3.95 mm (23)
  • 4.0 mm (23)
Corner Radius Min do Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (202)
Corner Chamfer Min do Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (202)
Corner Chamfer Min do Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WS25PT (66)
  • WU10PT (191)
  • WU25PT (409)
  • WU35PT (141)
Hand Of Tool
Hand Of Tool
  • L (106)
  • N (15)
  • R (106)
Wiper Insert
Wiper Insert
  • N (383)
F Dimension
F Dimension
  • 1.276 mm (2)
  • 1.451 mm (2)
  • 1.826 mm (3)
  • 2.7 mm (2)
  • 3.7 mm (2)
  • 4.7 mm (1)
  • 5.7 mm (1)
  • 7.5 mm (2)
  • 8.525 mm (2)
  • 9.0 mm (2)
  • 9.525 mm (2)
  • 10.0 mm (2)
  • 11.0 mm (4)
  • 11.05 mm (4)
  • 12.0 mm (4)
  • 12.701 mm (4)
  • 13.0 mm (4)
  • 13.951 mm (2)
  • 13.976 mm (2)
  • 15.875 mm (4)
  • 15.976 mm (2)
  • 16.0 mm (4)
  • 16.1 mm (2)
  • 17.0 mm (6)
  • 17.3 mm (6)
  • 19.05 mm (4)
  • 19.075 mm (6)
  • 19.125 mm (14)
  • 20.0 mm (4)
  • 20.05 mm (6)
  • 20.1 mm (14)
  • 25.05 mm (6)
  • 25.1 mm (18)
  • 25.201 mm (4)
  • 25.326 mm (2)
  • 25.425 mm (6)
  • 25.475 mm (18)
  • 25.576 mm (4)
  • 25.701 mm (2)
  • 31.826 mm (8)
  • 31.925 mm (4)
  • 32.051 mm (4)
  • 32.075 mm (8)
  • 32.176 mm (4)
  • 32.301 mm (4)
  • 32.4 mm (2)
  • 32.65 mm (2)
  • 38.275 mm (2)
  • 38.401 mm (2)
  • 38.75 mm (2)
  • 40.176 mm (2)
  • 40.301 mm (2)
  • 40.651 mm (2)
F Dimension Min do F Dimension Max
F Dimension
F Dimension
  • 0.05 in (2)
  • 0.057 in (2)
  • 0.073 in (3)
  • 0.106 in (2)
  • 0.146 in (2)
  • 0.185 in (1)
  • 0.224 in (1)
  • 0.295 in (2)
  • 0.336 in (2)
  • 0.354 in (2)
  • 0.375 in (2)
  • 0.394 in (2)
  • 0.433 in (4)
  • 0.435 in (4)
  • 0.473 in (4)
  • 0.5 in (4)
  • 0.512 in (4)
  • 0.549 in (2)
  • 0.55 in (2)
  • 0.625 in (4)
  • 0.629 in (2)
  • 0.63 in (4)
  • 0.634 in (2)
  • 0.669 in (6)
  • 0.681 in (6)
  • 0.75 in (4)
  • 0.751 in (6)
  • 0.753 in (14)
  • 0.787 in (4)
  • 0.789 in (6)
  • 0.791 in (14)
  • 0.986 in (6)
  • 0.988 in (18)
  • 0.992 in (4)
  • 0.997 in (2)
  • 1.002 in (6)
  • 1.004 in (18)
  • 1.008 in (4)
  • 1.012 in (2)
  • 1.254 in (8)
  • 1.258 in (4)
  • 1.262 in (4)
  • 1.264 in (8)
  • 1.268 in (4)
  • 1.272 in (4)
  • 1.276 in (2)
  • 1.285 in (2)
  • 1.508 in (2)
  • 1.512 in (2)
  • 1.526 in (2)
  • 1.582 in (2)
  • 1.587 in (2)
  • 1.6 in (2)
F Dimension Min do F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 15.875 mm (2)
  • 16.0 mm (2)
  • 20.0 mm (8)
  • 25.0 mm (8)
  • 31.75 mm (6)
  • 32.0 mm (6)
  • 57.151 mm (12)
Minimum Axial Groove Diameter Min do Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.625 in (2)
  • 0.63 in (2)
  • 0.787 in (8)
  • 0.984 in (8)
  • 1.25 in (6)
  • 1.26 in (6)
  • 2.25 in (12)
Minimum Axial Groove Diameter Min do Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.787 in (4)
  • 1.26 in (24)
  • 16.0 in (12)
Maximum Axial Groove Diameter Min do Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 20.0 mm (4)
  • 32.0 mm (24)
  • 406.401 mm (12)
Maximum Axial Groove Diameter Min do Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (195)
  • S (32)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (22)
  • NEUTRAL (ZERO) (10)
  • POSITIVE-ZERO (36)
Maximum Bore Depth
Maximum Bore Depth
  • 0.946 in (2)
  • 1.0 in (2)
  • 1.25 in (4)
  • 1.26 in (2)
  • 1.5 in (4)
  • 1.575 in (2)
  • 1.587 in (2)
  • 1.594 in (2)
  • 1.969 in (2)
  • 1.979 in (2)
  • 1.98 in (2)
  • 2.0 in (4)
  • 2.5 in (2)
Maximum Bore Depth Min do Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 24.0 mm (2)
  • 25.401 mm (2)
  • 31.75 mm (4)
  • 32.0 mm (2)
  • 38.1 mm (4)
  • 40.0 mm (2)
  • 40.301 mm (2)
  • 40.5 mm (2)
  • 50.0 mm (2)
  • 50.276 mm (2)
  • 50.301 mm (2)
  • 50.801 mm (4)
  • 63.5 mm (2)
Maximum Bore Depth Min do Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (32)
frontEnd
Clamp Style
Clamp Style
  • C (12)
  • M (36)
  • S (28)
  • Y (163)
Cutting Width
Cutting Width
  • 0.055 in (10)
  • 0.079 in (78)
  • 0.084 in (69)
  • 0.094 in (71)
  • 0.095 in (77)
  • 0.098 in (70)
  • 0.119 in (79)
  • 0.123 in (70)
  • 0.125 in (89)
  • 0.13 in (70)
  • 0.157 in (60)
  • 0.162 in (52)
  • 0.187 in (56)
  • 0.188 in (52)
  • 0.192 in (52)
  • 0.197 in (31)
  • 0.202 in (29)
  • 0.237 in (36)
  • 0.241 in (35)
  • 0.25 in (35)
  • 0.255 in (35)
  • 0.281 in (32)
  • 0.312 in (24)
  • 0.315 in (25)
  • 0.317 in (24)
  • 0.32 in (26)
  • 0.375 in (9)
  • 0.38 in (10)
  • 0.399 in (10)
Cutting Width Min do Cutting Width Max