M370™ Series • IC08 • Medium

Selecionar filtros
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (46)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (44)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (46)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (46)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (46)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (46)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (46)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (46)
  • M Stainless Steel (46)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (46)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (46)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (46)
  • K Cast Iron (42)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (42)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (42)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (42)
  • N Non-Ferrous Materials (37)
    • N1
      Wrought Aluminum (37)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (37)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (37)
  • S High-Temp Alloys (44)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (44)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (44)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (44)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (44)
  • H Hardened Materials (38)
    • H1
      Hardened Materials 44-48 HRC (38)
Select All Star
  • CN (7)
  • DE (24)
  • GB (11)
  • IN (2)
  • SG (12)
  • US (12)
Applications
Applications
  • Chamfer Milling Chamfer Milling (1)
  • Face Milling Face Milling (35)
  • Pocket Pocket (35)
  • Pocket Helical Pocket Helical (34)
  • Pocket Milling Pocket Milling (35)
  • Pocket Plunge Milling Pocket Plunge Milling (35)
  • Profile Milling Profile Milling (35)
  • Ramping Ramping (35)
  • Shoulder Milling Shoulder Milling (34)
  • Shoulder Roughing Shoulder Roughing (34)
  • Slot Milling Slot Milling (34)
  • Slot Square End Slot Square End (1)
Cutting Diameter
Cutting Diameter
  • 0.441 in (3)
  • 0.445 in (3)
  • 0.457 in (3)
  • 0.461 in (1)
  • 0.555 in (1)
  • 0.702 in (2)
  • 0.711 in (1)
  • 0.713 in (2)
  • 0.717 in (1)
  • 0.95 in (1)
  • 0.954 in (2)
  • 1.024 in (1)
  • 1.028 in (1)
  • 1.102 in (1)
  • 1.417 in (2)
  • 1.449 in (2)
  • 1.499 in (2)
  • 1.931 in (1)
  • 1.949 in (1)
  • 2.043 in (1)
  • 2.273 in (1)
  • 2.449 in (1)
  • 2.598 in (1)
Cutting Diameter Min a Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 11.201 mm (3)
  • 11.3 mm (3)
  • 11.601 mm (3)
  • 11.701 mm (1)
  • 14.101 mm (1)
  • 17.8 mm (2)
  • 18.05 mm (1)
  • 18.1 mm (2)
  • 18.2 mm (1)
  • 24.1 mm (1)
  • 24.201 mm (2)
  • 26.0 mm (1)
  • 26.1 mm (1)
  • 28.0 mm (1)
  • 36.0 mm (2)
  • 36.801 mm (2)
  • 38.075 mm (2)
  • 49.051 mm (1)
  • 49.5 mm (1)
  • 51.901 mm (1)
  • 57.7 mm (1)
  • 62.2 mm (1)
  • 66.0 mm (1)
Cutting Diameter Min a Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 25.0 mm (6)
  • 25.401 mm (4)
  • 28.0 mm (1)
  • 31.75 mm (2)
  • 32.0 mm (4)
  • 38.1 mm (3)
  • 40.0 mm (2)
  • 42.0 mm (1)
  • 50.0 mm (2)
  • 50.801 mm (2)
  • 52.0 mm (2)
  • 63.0 mm (1)
  • 63.5 mm (1)
  • 66.0 mm (1)
  • 76.2 mm (2)
  • 80.0 mm (1)
Maximum Cutting Diameter Min a Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.984 in (6)
  • 1.0 in (4)
  • 1.102 in (1)
  • 1.25 in (2)
  • 1.26 in (4)
  • 1.5 in (3)
  • 1.575 in (2)
  • 1.655 in (1)
  • 1.969 in (2)
  • 2.0 in (2)
  • 2.047 in (2)
  • 2.48 in (1)
  • 2.5 in (1)
  • 2.598 in (1)
  • 3.0 in (2)
  • 3.15 in (1)
Maximum Cutting Diameter Min a Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 1.25 mm (35)
Cutting Length Min a Cutting Length Max
Cutting Length
Cutting Length
  • 0.049 in (35)
Cutting Length Min a Cutting Length Max
Reach
Reach
  • 1.379 in (3)
  • 1.5 in (7)
  • 1.575 in (14)
  • 1.693 in (2)
  • 1.969 in (9)
Reach Min a Reach Max
Reach
Reach
  • 35.0 mm (3)
  • 38.1 mm (7)
  • 40.0 mm (14)
  • 43.0 mm (2)
  • 50.0 mm (9)
Reach Min a Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 12.0 (34)
  • 78.0 (1)
Tool Cutting Edge Angle Min a Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • 2 Key & Socket Head Cap Screw (1)
  • A-Socket Head Cap Screw (14)
  • Screw-On Connection (5)
  • Straight-Cylindrical (15)
Number of Flutes
Number of Flutes
  • 2 (5)
  • 3 (10)
  • 4 (6)
  • 5 (5)
  • 6 (5)
  • 7 (3)
  • 8 (1)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.575 in (8)
  • 1.969 in (7)
  • 2.244 in (3)
  • 2.657 in (2)
  • 5.906 in (2)
  • 6.0 in (4)
  • 7.686 in (1)
  • 7.875 in (4)
  • 8.0 in (2)
  • 11.811 in (2)
Over All Length [L] Min a Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (8)
  • 50.0 mm (7)
  • 57.0 mm (3)
  • 67.5 mm (2)
  • 150.0 mm (2)
  • 152.4 mm (4)
  • 195.201 mm (1)
  • 200.0 mm (4)
  • 203.201 mm (2)
  • 300.0 mm (2)
Over All Length [L] Min a Over All Length [L] Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TN5515 (35)
  • TN6520 (35)
  • TN6525 (37)
  • TN6540 (37)
  • TN7535 (35)
  • WK15CM (36)
  • WP25PM (37)
  • WP40PM (37)
  • WS30PM (36)
  • WS40PM (37)
Hand Of Tool
Hand Of Tool
  • R (35)
Wiper Insert
Wiper Insert
  • N (12)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.48 (1)
  • 0.5 (3)
  • 0.62 (1)
  • 0.66 (1)
  • 0.81 (1)
  • 0.83 (3)
  • 0.84 (2)
  • 1.01 (1)
  • 1.09 (2)
  • 1.41 (6)
  • 1.46 (2)
  • 1.5 (3)
  • 1.73 (1)
  • 2.05 (3)
  • 2.09 (5)
Maximum Ramp Angle Min a Maximum Ramp Angle Max
frontEnd
Insert Shape
Insert Shape
  • X-TRIGON WO_J 101.5 (37)
  • X-TRIGON WO_J 80 (45)
Neck Diameter
Neck Diameter
  • 0.828 in (1)
  • 0.843 in (3)
  • 0.866 in (3)
  • 0.906 in (1)
  • 1.093 in (2)
  • 1.143 in (3)
  • 1.196 in (1)
  • 1.324 in (1)
Neck Diameter Min a Neck Diameter Max
Neck Diameter
Neck Diameter
  • 21.0 mm (1)
  • 21.401 mm (3)
  • 22.0 mm (3)
  • 23.0 mm (1)
  • 27.75 mm (2)
  • 29.0 mm (3)
  • 30.375 mm (1)
  • 33.625 mm (1)
Neck Diameter Min a Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • X-TRIGON WO_J 101.5 (2)
  • X-TRIGON WO_J 80 (10)
Insert IC Size
Insert IC Size
  • 7.801 mm (12)
Insert IC Size Min a Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.307 in (12)
Insert IC Size Min a Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.301 mm (12)
Cutting Edge Length Min a Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.248 in (12)
Cutting Edge Length Min a Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • MH (6)
  • MM (6)
Cutting Tool Material
Cutting Tool Material
  • H W (12)
Tolerance Class
Tolerance Class
  • E (12)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (15)
  • SCREW-ON (5)
  • SHELL MILL (15)
Back-End Diameter
Back-End Diameter
  • 12.701 mm (1)
  • 16.0 mm (2)
  • 19.05 mm (3)
  • 21.0 mm (3)
  • 22.0 mm (5)
  • 25.0 mm (5)
  • 25.401 mm (5)
  • 27.0 mm (2)
  • 29.0 mm (2)
  • 31.701 mm (1)
  • 31.75 mm (2)
  • 32.0 mm (3)
  • 38.1 mm (1)
Back-End Diameter Min a Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.5 in (1)
  • 0.63 in (2)
  • 0.75 in (3)
  • 0.828 in (3)
  • 0.866 in (5)
  • 0.984 in (5)
  • 1.0 in (5)
  • 1.063 in (2)
  • 1.143 in (2)
  • 1.248 in (1)
  • 1.25 in (2)
  • 1.26 in (3)
  • 1.5 in (1)
Back-End Diameter Min a Back-End Diameter Max
No filters matching ""
Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
product-image
Please adjust the following properties from

Código de catálogo ISO

Número do catálogo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Você deve ser registrado para ver as informações do seu painel
Session expired due to inactivity, please login again
Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
itens adicionados com sucesso ao carrinho
Ver o carrinho

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Código de catálogo ISO Classe    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?